[PATCH v3 1/4] crypto: rockchip/crypto - add DT bindings documentation

[Rob Herring]

On Wed, Nov 11, 2015 at 02:35:56PM +0800, Zain Wang wrote:
> Add DT bindings documentation for the rk3288 crypto drivers.
> 
> Signed-off-by: Zain Wang <zain.wang at rock-chips.com>

Acked-by: Rob Herring <robh at kernel.org>

> ---
> 
> Changed in v3:
> - add reset property
> 
> Changed in v2:
> - None
> 
> Changed in v1:
> - remove the _crypto suffix
> - use "rockchip,rk3288-crypto" instead of "rockchip,rk3288"
> - remove the description of status
> 
> 
>  .../devicetree/bindings/crypto/rockchip-crypto.txt | 29 ++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
> 
> diff --git a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt b/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
> new file mode 100644
> index 0000000..096df34
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
> @@ -0,0 +1,29 @@
> +Rockchip Electronics And Security Accelerator
> +
> +Required properties:
> +- compatible: Should be "rockchip,rk3288-crypto"
> +- reg: Base physical address of the engine and length of memory mapped
> +       region
> +- interrupts: Interrupt number
> +- clocks: Reference to the clocks about crypto
> +- clock-names: "aclk" used to clock data
> +	       "hclk" used to clock data
> +	       "sclk" used to clock crypto accelerator
> +	       "apb_pclk" used to clock dma
> +- resets: Must contain an entry for each entry in reset-names.
> +	  See ../reset/reset.txt for details.
> +- reset-names: Must include the name "crypto-rst".
> +
> +Examples:
> +
> +	crypto: cypto-controller at ff8a0000 {
> +		compatible = "rockchip,rk3288-crypto";
> +		reg = <0xff8a0000 0x4000>;
> +		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
> +			 <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
> +		clock-names = "aclk", "hclk", "sclk", "apb_pclk";
> +		resets = <&cru SRST_CRYPTO>;
> +		reset-names = "crypto-rst";
> +		status = "okay";
> +	};
> -- 
> 1.9.1
> 
>