[PATCH v2 1/2] usb: dwc2: host: Fix missing device insertions

John Youn John.Youn at synopsys.com
Wed Nov 4 18:52:21 PST 2015


On 11/3/2015 12:31 PM, Douglas Anderson wrote:
> If you've got your interrupt signals bouncing a bit as you insert your
> USB device, you might end up in a state when the device is connected but
> the driver doesn't know it.
> 
> Specifically, the observed order is:
>  1. hardware sees connect
>  2. hardware sees disconnect
>  3. hardware sees connect
>  4. dwc2_port_intr() - clears connect interrupt
>  5. dwc2_handle_common_intr() - calls dwc2_hcd_disconnect()
> 
> Now you'll be stuck with the cable plugged in and no further interrupts
> coming in but the driver will think we're disconnected.
> 
> We'll fix this by checking for the missing connect interrupt and
> re-connecting after the disconnect is posted.  We don't skip the
> disconnect because if there is a transitory disconnect we really want to
> de-enumerate and re-enumerate.
> 
> Signed-off-by: Douglas Anderson <dianders at chromium.org>
> ---
> Changes in v2:
> - Don't reconnect when called from _dwc2_hcd_stop() (John Youn)
> 
>  drivers/usb/dwc2/core.h      |  6 ++++--
>  drivers/usb/dwc2/core_intr.c |  4 ++--
>  drivers/usb/dwc2/hcd.c       | 40 ++++++++++++++++++++++++++++++++++++++--
>  drivers/usb/dwc2/hcd_intr.c  |  6 +-----
>  4 files changed, 45 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
> index a66d3cb62b65..daa1c342cdac 100644
> --- a/drivers/usb/dwc2/core.h
> +++ b/drivers/usb/dwc2/core.h
> @@ -1154,12 +1154,14 @@ static inline int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg,
>  
>  #if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
>  extern int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg);
> -extern void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg);
> +extern void dwc2_hcd_connect(struct dwc2_hsotg *hsotg);
> +extern void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force);
>  extern void dwc2_hcd_start(struct dwc2_hsotg *hsotg);
>  #else
>  static inline int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg)
>  { return 0; }
> -static inline void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg) {}
> +static inline void dwc2_hcd_connect(struct dwc2_hsotg *hsotg) {}
> +static inline void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force) {}
>  static inline void dwc2_hcd_start(struct dwc2_hsotg *hsotg) {}
>  static inline void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) {}
>  static inline int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq)
> diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
> index 27daa42788b1..61601d16e233 100644
> --- a/drivers/usb/dwc2/core_intr.c
> +++ b/drivers/usb/dwc2/core_intr.c
> @@ -239,7 +239,7 @@ static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
>  			dev_dbg(hsotg->dev, "a_suspend->a_peripheral (%d)\n",
>  				hsotg->op_state);
>  			spin_unlock(&hsotg->lock);
> -			dwc2_hcd_disconnect(hsotg);
> +			dwc2_hcd_disconnect(hsotg, false);
>  			spin_lock(&hsotg->lock);
>  			hsotg->op_state = OTG_STATE_A_PERIPHERAL;
>  		} else {
> @@ -401,7 +401,7 @@ static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg)
>  		dwc2_op_state_str(hsotg));
>  
>  	if (hsotg->op_state == OTG_STATE_A_HOST)
> -		dwc2_hcd_disconnect(hsotg);
> +		dwc2_hcd_disconnect(hsotg, false);
>  
>  	dwc2_writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS);
>  }
> diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
> index e79baf73c234..e208eac7ff57 100644
> --- a/drivers/usb/dwc2/hcd.c
> +++ b/drivers/usb/dwc2/hcd.c
> @@ -268,15 +268,33 @@ static void dwc2_hcd_cleanup_channels(struct dwc2_hsotg *hsotg)
>  }
>  
>  /**
> + * dwc2_hcd_connect() - Handles connect of the HCD
> + *
> + * @hsotg: Pointer to struct dwc2_hsotg
> + *
> + * Must be called with interrupt disabled and spinlock held
> + */
> +void dwc2_hcd_connect(struct dwc2_hsotg *hsotg)
> +{
> +	if (hsotg->lx_state != DWC2_L0)
> +		usb_hcd_resume_root_hub(hsotg->priv);
> +
> +	hsotg->flags.b.port_connect_status_change = 1;
> +	hsotg->flags.b.port_connect_status = 1;
> +}
> +
> +/**
>   * dwc2_hcd_disconnect() - Handles disconnect of the HCD
>   *
>   * @hsotg: Pointer to struct dwc2_hsotg
> + * @force: If true, we won't try to reconnect even if we see device connected.
>   *
>   * Must be called with interrupt disabled and spinlock held
>   */
> -void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg)
> +void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force)
>  {
>  	u32 intr;
> +	u32 hprt0;
>  
>  	/* Set status flags for the hub driver */
>  	hsotg->flags.b.port_connect_status_change = 1;
> @@ -315,6 +333,24 @@ void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg)
>  		dwc2_hcd_cleanup_channels(hsotg);
>  
>  	dwc2_host_disconnect(hsotg);
> +
> +	/*
> +	 * Add an extra check here to see if we're actually connected but
> +	 * we don't have a detection interrupt pending.  This can happen if:
> +	 *   1. hardware sees connect
> +	 *   2. hardware sees disconnect
> +	 *   3. hardware sees connect
> +	 *   4. dwc2_port_intr() - clears connect interrupt
> +	 *   5. dwc2_handle_common_intr() - calls here
> +	 *
> +	 * Without the extra check here we will end calling disconnect
> +	 * and won't get any future interrupts to handle the connect.
> +	 */
> +	if (!force) {
> +		hprt0 = dwc2_readl(hsotg->regs + HPRT0);
> +		if (!(hprt0 & HPRT0_CONNDET) && (hprt0 & HPRT0_CONNSTS))
> +			dwc2_hcd_connect(hsotg);
> +	}
>  }
>  
>  /**
> @@ -2365,7 +2401,7 @@ static void _dwc2_hcd_stop(struct usb_hcd *hcd)
>  
>  	spin_lock_irqsave(&hsotg->lock, flags);
>  	/* Ensure hcd is disconnected */
> -	dwc2_hcd_disconnect(hsotg);
> +	dwc2_hcd_disconnect(hsotg, true);
>  	dwc2_hcd_stop(hsotg);
>  	hsotg->lx_state = DWC2_L3;
>  	hcd->state = HC_STATE_HALT;
> diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
> index bda0b21b850f..03504ac2fecc 100644
> --- a/drivers/usb/dwc2/hcd_intr.c
> +++ b/drivers/usb/dwc2/hcd_intr.c
> @@ -350,11 +350,7 @@ static void dwc2_port_intr(struct dwc2_hsotg *hsotg)
>  		dev_vdbg(hsotg->dev,
>  			 "--Port Interrupt HPRT0=0x%08x Port Connect Detected--\n",
>  			 hprt0);
> -		if (hsotg->lx_state != DWC2_L0)
> -			usb_hcd_resume_root_hub(hsotg->priv);
> -
> -		hsotg->flags.b.port_connect_status_change = 1;
> -		hsotg->flags.b.port_connect_status = 1;
> +		dwc2_hcd_connect(hsotg);
>  		hprt0_modify |= HPRT0_CONNDET;
>  
>  		/*
> 


Acked-by: John Youn <johnyoun at synopsys.com>
Tested-by: John Youn <johnyoun at synopsys.com>

Tested on Synopsys HAPS platform IP v3.20a.

Regards,
John







More information about the Linux-rockchip mailing list