[PATCH] net: stmmac: dwmac-rk: Don't add function name in info or err messages
Romain Perier
romain.perier at gmail.com
Mon Jun 15 10:44:19 PDT 2015
These kind of informations are only useful for debugging and should not be
displayed in normal modules message.
Signed-off-by: Romain Perier <romain.perier at gmail.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 75 +++++++++++++-------------
1 file changed, 36 insertions(+), 39 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 30e28f0..26c339d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -98,7 +98,7 @@ static void set_to_rgmii(struct rk_priv_data *bsp_priv,
struct device *dev = &bsp_priv->pdev->dev;
if (IS_ERR(bsp_priv->grf)) {
- dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+ dev_err(dev, "Missing rockchip,grf property\n");
return;
}
@@ -115,7 +115,7 @@ static void set_to_rmii(struct rk_priv_data *bsp_priv)
struct device *dev = &bsp_priv->pdev->dev;
if (IS_ERR(bsp_priv->grf)) {
- dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+ dev_err(dev, "Missing rockchip,grf property\n");
return;
}
@@ -128,7 +128,7 @@ static void set_rgmii_speed(struct rk_priv_data *bsp_priv, int speed)
struct device *dev = &bsp_priv->pdev->dev;
if (IS_ERR(bsp_priv->grf)) {
- dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+ dev_err(dev, "Missing rockchip,grf property\n");
return;
}
@@ -147,7 +147,7 @@ static void set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
struct device *dev = &bsp_priv->pdev->dev;
if (IS_ERR(bsp_priv->grf)) {
- dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+ dev_err(dev, "Missing rockchip,grf property\n");
return;
}
@@ -170,46 +170,46 @@ static int gmac_clk_init(struct rk_priv_data *bsp_priv)
bsp_priv->mac_clk_rx = devm_clk_get(dev, "mac_clk_rx");
if (IS_ERR(bsp_priv->mac_clk_rx))
- dev_err(dev, "%s: cannot get clock %s\n",
- __func__, "mac_clk_rx");
+ dev_err(dev, "cannot get clock %s\n",
+ "mac_clk_rx");
bsp_priv->mac_clk_tx = devm_clk_get(dev, "mac_clk_tx");
if (IS_ERR(bsp_priv->mac_clk_tx))
- dev_err(dev, "%s: cannot get clock %s\n",
- __func__, "mac_clk_tx");
+ dev_err(dev, "cannot get clock %s\n",
+ "mac_clk_tx");
bsp_priv->aclk_mac = devm_clk_get(dev, "aclk_mac");
if (IS_ERR(bsp_priv->aclk_mac))
- dev_err(dev, "%s: cannot get clock %s\n",
- __func__, "aclk_mac");
+ dev_err(dev, "cannot get clock %s\n",
+ "aclk_mac");
bsp_priv->pclk_mac = devm_clk_get(dev, "pclk_mac");
if (IS_ERR(bsp_priv->pclk_mac))
- dev_err(dev, "%s: cannot get clock %s\n",
- __func__, "pclk_mac");
+ dev_err(dev, "cannot get clock %s\n",
+ "pclk_mac");
bsp_priv->clk_mac = devm_clk_get(dev, "stmmaceth");
if (IS_ERR(bsp_priv->clk_mac))
- dev_err(dev, "%s: cannot get clock %s\n",
- __func__, "stmmaceth");
+ dev_err(dev, "cannot get clock %s\n",
+ "stmmaceth");
if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII) {
bsp_priv->clk_mac_ref = devm_clk_get(dev, "clk_mac_ref");
if (IS_ERR(bsp_priv->clk_mac_ref))
- dev_err(dev, "%s: cannot get clock %s\n",
- __func__, "clk_mac_ref");
+ dev_err(dev, "cannot get clock %s\n",
+ "clk_mac_ref");
if (!bsp_priv->clock_input) {
bsp_priv->clk_mac_refout =
devm_clk_get(dev, "clk_mac_refout");
if (IS_ERR(bsp_priv->clk_mac_refout))
- dev_err(dev, "%s: cannot get clock %s\n",
- __func__, "clk_mac_refout");
+ dev_err(dev, "cannot get clock %s\n",
+ "clk_mac_refout");
}
}
if (bsp_priv->clock_input) {
- dev_info(dev, "%s: clock input from PHY\n", __func__);
+ dev_info(dev, "clock input from PHY\n");
} else {
if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII)
clk_set_rate(bsp_priv->clk_mac_pll, 50000000);
@@ -296,20 +296,18 @@ static int phy_power_on(struct rk_priv_data *bsp_priv, bool enable)
struct device *dev = &bsp_priv->pdev->dev;
if (!ldo) {
- dev_err(dev, "%s: no regulator found\n", __func__);
+ dev_err(dev, "no regulator found\n");
return -1;
}
if (enable) {
ret = regulator_enable(ldo);
if (ret)
- dev_err(dev, "%s: fail to enable phy-supply\n",
- __func__);
+ dev_err(dev, "fail to enable phy-supply\n");
} else {
ret = regulator_disable(ldo);
if (ret)
- dev_err(dev, "%s: fail to disable phy-supply\n",
- __func__);
+ dev_err(dev, "fail to disable phy-supply\n");
}
return 0;
@@ -341,12 +339,11 @@ static void *rk_gmac_setup(struct platform_device *pdev)
ret = of_property_read_string(dev->of_node, "clock_in_out", &strings);
if (ret) {
- dev_err(dev, "%s: Can not read property: clock_in_out.\n",
- __func__);
+ dev_err(dev, "Can not read property: clock_in_out.\n");
bsp_priv->clock_input = true;
} else {
- dev_info(dev, "%s: clock input or output? (%s).\n",
- __func__, strings);
+ dev_info(dev, "clock input or output? (%s).\n",
+ strings);
if (!strcmp(strings, "input"))
bsp_priv->clock_input = true;
else
@@ -356,22 +353,22 @@ static void *rk_gmac_setup(struct platform_device *pdev)
ret = of_property_read_u32(dev->of_node, "tx_delay", &value);
if (ret) {
bsp_priv->tx_delay = 0x30;
- dev_err(dev, "%s: Can not read property: tx_delay.", __func__);
- dev_err(dev, "%s: set tx_delay to 0x%x\n",
- __func__, bsp_priv->tx_delay);
+ dev_err(dev, "Can not read property: tx_delay.");
+ dev_err(dev, "set tx_delay to 0x%x\n",
+ bsp_priv->tx_delay);
} else {
- dev_info(dev, "%s: TX delay(0x%x).\n", __func__, value);
+ dev_info(dev, "TX delay(0x%x).\n", value);
bsp_priv->tx_delay = value;
}
ret = of_property_read_u32(dev->of_node, "rx_delay", &value);
if (ret) {
bsp_priv->rx_delay = 0x10;
- dev_err(dev, "%s: Can not read property: rx_delay.", __func__);
- dev_err(dev, "%s: set rx_delay to 0x%x\n",
- __func__, bsp_priv->rx_delay);
+ dev_err(dev, "Can not read property: rx_delay.");
+ dev_err(dev, "set rx_delay to 0x%x\n",
+ bsp_priv->rx_delay);
} else {
- dev_info(dev, "%s: RX delay(0x%x).\n", __func__, value);
+ dev_info(dev, "RX delay(0x%x).\n", value);
bsp_priv->rx_delay = value;
}
@@ -381,13 +378,13 @@ static void *rk_gmac_setup(struct platform_device *pdev)
/*rmii or rgmii*/
if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RGMII) {
- dev_info(dev, "%s: init for RGMII\n", __func__);
+ dev_info(dev, "init for RGMII\n");
set_to_rgmii(bsp_priv, bsp_priv->tx_delay, bsp_priv->rx_delay);
} else if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII) {
- dev_info(dev, "%s: init for RMII\n", __func__);
+ dev_info(dev, "init for RMII\n");
set_to_rmii(bsp_priv);
} else {
- dev_err(dev, "%s: NO interface defined!\n", __func__);
+ dev_err(dev, "NO interface defined!\n");
}
gmac_clk_init(bsp_priv);
--
1.9.1
More information about the Linux-rockchip
mailing list