[PATCH] clk: rockchip: Fix SPIF special clock definition

[Sjoerd Simons]

Neither spdif_src nor spdif_pll exists, judging by the vendor kernel in
both cases spdif_pre was meant. This brings the naming in line and
hierachy in line with that of sclk_i2s0.

Also allow sclk_spdif and spdif_frac to change their parents rate as
that the upstream dividers are purely there to feed sclk_spdif

Signed-off-by: Sjoerd Simons <sjoerd.simons at collabora.co.uk>
---
 drivers/clk/rockchip/clk-rk3188.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3188.c b/drivers/clk/rockchip/clk-rk3188.c
index 0abf22d..ed02bbc 100644
--- a/drivers/clk/rockchip/clk-rk3188.c
+++ b/drivers/clk/rockchip/clk-rk3188.c
@@ -202,7 +202,7 @@ PNAME(mux_pll_src_cpll_gpll_p)	= { "cpll", "gpll" };
 PNAME(mux_aclk_cpu_p)		= { "apll", "gpll" };
 PNAME(mux_sclk_cif0_p)		= { "cif0_pre", "xin24m" };
 PNAME(mux_sclk_i2s0_p)		= { "i2s0_pre", "i2s0_frac", "xin12m" };
-PNAME(mux_sclk_spdif_p)		= { "spdif_src", "spdif_frac", "xin12m" };
+PNAME(mux_sclk_spdif_p)		= { "spdif_pre", "spdif_frac", "xin12m" };
 PNAME(mux_sclk_uart0_p)		= { "uart0_pre", "uart0_frac", "xin24m" };
 PNAME(mux_sclk_uart1_p)		= { "uart1_pre", "uart1_frac", "xin24m" };
 PNAME(mux_sclk_uart2_p)		= { "uart2_pre", "uart2_frac", "xin24m" };
@@ -350,10 +350,10 @@ static struct rockchip_clk_branch common_clk_branches[] __initdata = {
 	COMPOSITE_NOMUX(0, "spdif_pre", "i2s_src", 0,
 			RK2928_CLKSEL_CON(5), 0, 7, DFLAGS,
 			RK2928_CLKGATE_CON(0), 13, GFLAGS),
-	COMPOSITE_FRAC(0, "spdif_frac", "spdif_pll", 0,
+	COMPOSITE_FRAC(0, "spdif_frac", "spdif_pre", CLK_SET_RATE_PARENT,
 			RK2928_CLKSEL_CON(9), 0,
 			RK2928_CLKGATE_CON(0), 14, GFLAGS),
-	MUX(SCLK_SPDIF, "sclk_spdif", mux_sclk_spdif_p, 0,
+	MUX(SCLK_SPDIF, "sclk_spdif", mux_sclk_spdif_p, CLK_SET_RATE_PARENT,
 			RK2928_CLKSEL_CON(5), 8, 2, MFLAGS),
 
 	/*
-- 
2.4.6