[PATCH v11 04/19] drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & dynamic_range
Yakir Yang
ykk at rock-chips.com
Tue Dec 15 19:30:26 PST 2015
Both hsync/vsync polarity and interlace mode can be parsed from
drm display mode, and dynamic_range and ycbcr_coeff can be judge
by the video code.
But presumably Exynos still relies on the DT properties, so take
good use of mode_fixup() in to achieve the compatibility hacks.
Signed-off-by: Yakir Yang <ykk at rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
Tested-by: Javier Martinez Canillas <javier at osg.samsung.com>
---
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7:
- Back to use the of_property_read_bool() interfacs to provoid backward
compatibility of "hsync-active-high" "vsync-active-high" "interlaced"
to avoid -EOVERFLOW error (Krzysztof)
Changes in v6: None
Changes in v5:
- Switch video timing type to "u32", so driver could use "of_property_read_u32"
to get the backword timing values. Krzysztof suggest me that driver could use
the "of_property_read_bool" to get backword timing values, but that interfacs
would modify the original drm_display_mode timing directly (whether those
properties exists or not).
Changes in v4:
- Provide backword compatibility with samsung. (Krzysztof)
Changes in v3:
- Dynamic parse video timing info from struct drm_display_mode and
struct drm_display_info. (Thierry)
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 148 +++++++++++++--------
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 2 +-
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 14 +-
3 files changed, 103 insertions(+), 61 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 6f899cd..a0d97cb 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -890,8 +890,8 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
return;
}
- ret = analogix_dp_set_link_train(dp, dp->video_info->lane_count,
- dp->video_info->link_rate);
+ ret = analogix_dp_set_link_train(dp, dp->video_info.lane_count,
+ dp->video_info.link_rate);
if (ret) {
dev_err(dp->dev, "unable to do link train\n");
return;
@@ -1032,6 +1032,85 @@ static void analogix_dp_bridge_disable(struct drm_bridge *bridge)
dp->dpms_mode = DRM_MODE_DPMS_OFF;
}
+static void analogix_dp_bridge_mode_set(struct drm_bridge *bridge,
+ struct drm_display_mode *orig_mode,
+ struct drm_display_mode *mode)
+{
+ struct analogix_dp_device *dp = bridge->driver_private;
+ struct drm_display_info *display_info = &dp->connector->display_info;
+ struct video_info *video = &dp->video_info;
+ struct device_node *dp_node = dp->dev->of_node;
+ int vic;
+
+ /* Input video interlaces & hsync pol & vsync pol */
+ video->interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+ video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
+ video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
+
+ /* Input video dynamic_range & colorimetry */
+ vic = drm_match_cea_mode(mode);
+ if ((vic == 6) || (vic == 7) || (vic == 21) || (vic == 22) ||
+ (vic == 2) || (vic == 3) || (vic == 17) || (vic == 18)) {
+ video->dynamic_range = CEA;
+ video->ycbcr_coeff = COLOR_YCBCR601;
+ } else if (vic) {
+ video->dynamic_range = CEA;
+ video->ycbcr_coeff = COLOR_YCBCR709;
+ } else {
+ video->dynamic_range = VESA;
+ video->ycbcr_coeff = COLOR_YCBCR709;
+ }
+
+ /* Input vide bpc and color_formats */
+ switch (display_info->bpc) {
+ case 12:
+ video->color_depth = COLOR_12;
+ break;
+ case 10:
+ video->color_depth = COLOR_10;
+ break;
+ case 8:
+ video->color_depth = COLOR_8;
+ break;
+ case 6:
+ video->color_depth = COLOR_6;
+ break;
+ default:
+ video->color_depth = COLOR_8;
+ break;
+ }
+ if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+ video->color_space = COLOR_YCBCR444;
+ else if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+ video->color_space = COLOR_YCBCR422;
+ else if (display_info->color_formats & DRM_COLOR_FORMAT_RGB444)
+ video->color_space = COLOR_RGB;
+ else
+ video->color_space = COLOR_RGB;
+
+ /*
+ * NOTE: those property parsing code is used for providing backward
+ * compatibility for samsung platform.
+ * Due to we used the "of_property_read_u32" interfaces, when this
+ * property isn't present, the "video_info" can keep the original
+ * values and wouldn't be modified.
+ */
+ of_property_read_u32(dp_node, "samsung,color-space",
+ &video->color_space);
+ of_property_read_u32(dp_node, "samsung,dynamic-range",
+ &video->dynamic_range);
+ of_property_read_u32(dp_node, "samsung,ycbcr-coeff",
+ &video->ycbcr_coeff);
+ of_property_read_u32(dp_node, "samsung,color-depth",
+ &video->color_depth);
+ if (of_property_read_bool(dp_node, "hsync-active-high"))
+ video->h_sync_polarity = true;
+ if (of_property_read_bool(dp_node, "vsync-active-high"))
+ video->v_sync_polarity = true;
+ if (of_property_read_bool(dp_node, "interlaced"))
+ video->interlaced = true;
+}
+
static void analogix_dp_bridge_nop(struct drm_bridge *bridge)
{
/* do nothing */
@@ -1042,6 +1121,7 @@ static const struct drm_bridge_funcs analogix_dp_bridge_funcs = {
.disable = analogix_dp_bridge_disable,
.pre_enable = analogix_dp_bridge_nop,
.post_disable = analogix_dp_bridge_nop,
+ .mode_set = analogix_dp_bridge_mode_set,
.attach = analogix_dp_bridge_attach,
};
@@ -1073,62 +1153,24 @@ static int analogix_dp_create_bridge(struct drm_device *drm_dev,
return 0;
}
-static struct video_info *analogix_dp_dt_parse_pdata(struct device *dev)
+static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp)
{
- struct device_node *dp_node = dev->of_node;
- struct video_info *dp_video_config;
-
- dp_video_config = devm_kzalloc(dev, sizeof(*dp_video_config),
- GFP_KERNEL);
- if (!dp_video_config)
- return ERR_PTR(-ENOMEM);
-
- dp_video_config->h_sync_polarity =
- of_property_read_bool(dp_node, "hsync-active-high");
-
- dp_video_config->v_sync_polarity =
- of_property_read_bool(dp_node, "vsync-active-high");
-
- dp_video_config->interlaced =
- of_property_read_bool(dp_node, "interlaced");
-
- if (of_property_read_u32(dp_node, "samsung,color-space",
- &dp_video_config->color_space)) {
- dev_err(dev, "failed to get color-space\n");
- return ERR_PTR(-EINVAL);
- }
-
- if (of_property_read_u32(dp_node, "samsung,dynamic-range",
- &dp_video_config->dynamic_range)) {
- dev_err(dev, "failed to get dynamic-range\n");
- return ERR_PTR(-EINVAL);
- }
-
- if (of_property_read_u32(dp_node, "samsung,ycbcr-coeff",
- &dp_video_config->ycbcr_coeff)) {
- dev_err(dev, "failed to get ycbcr-coeff\n");
- return ERR_PTR(-EINVAL);
- }
-
- if (of_property_read_u32(dp_node, "samsung,color-depth",
- &dp_video_config->color_depth)) {
- dev_err(dev, "failed to get color-depth\n");
- return ERR_PTR(-EINVAL);
- }
+ struct device_node *dp_node = dp->dev->of_node;
+ struct video_info *video_info = &dp->video_info;
if (of_property_read_u32(dp_node, "samsung,link-rate",
- &dp_video_config->link_rate)) {
- dev_err(dev, "failed to get link-rate\n");
- return ERR_PTR(-EINVAL);
+ &video_info->link_rate)) {
+ dev_err(dp->dev, "failed to get link-rate\n");
+ return -EINVAL;
}
if (of_property_read_u32(dp_node, "samsung,lane-count",
- &dp_video_config->lane_count)) {
- dev_err(dev, "failed to get lane-count\n");
- return ERR_PTR(-EINVAL);
+ &video_info->lane_count)) {
+ dev_err(dp->dev, "failed to get lane-count\n");
+ return -EINVAL;
}
- return dp_video_config;
+ return 0;
}
int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
@@ -1161,9 +1203,9 @@ int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
*/
dp->plat_data = plat_data;
- dp->video_info = analogix_dp_dt_parse_pdata(&pdev->dev);
- if (IS_ERR(dp->video_info))
- return PTR_ERR(dp->video_info);
+ ret = analogix_dp_dt_parse_pdata(dp);
+ if (ret)
+ return ret;
dp->phy = devm_phy_get(dp->dev, "dp");
if (IS_ERR(dp->phy)) {
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index 57aa4b0d..0416d23 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -154,7 +154,7 @@ struct analogix_dp_device {
unsigned int irq;
void __iomem *reg_base;
- struct video_info *video_info;
+ struct video_info video_info;
struct link_train link_train;
struct work_struct hotplug_work;
struct phy *phy;
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index a388c0a..861097a 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -1084,15 +1084,15 @@ void analogix_dp_set_video_color_format(struct analogix_dp_device *dp)
u32 reg;
/* Configure the input color depth, color space, dynamic range */
- reg = (dp->video_info->dynamic_range << IN_D_RANGE_SHIFT) |
- (dp->video_info->color_depth << IN_BPC_SHIFT) |
- (dp->video_info->color_space << IN_COLOR_F_SHIFT);
+ reg = (dp->video_info.dynamic_range << IN_D_RANGE_SHIFT) |
+ (dp->video_info.color_depth << IN_BPC_SHIFT) |
+ (dp->video_info.color_space << IN_COLOR_F_SHIFT);
writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_2);
/* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */
reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
reg &= ~IN_YC_COEFFI_MASK;
- if (dp->video_info->ycbcr_coeff)
+ if (dp->video_info.ycbcr_coeff)
reg |= IN_YC_COEFFI_ITU709;
else
reg |= IN_YC_COEFFI_ITU601;
@@ -1229,17 +1229,17 @@ void analogix_dp_config_video_slave_mode(struct analogix_dp_device *dp)
reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
reg &= ~INTERACE_SCAN_CFG;
- reg |= (dp->video_info->interlaced << 2);
+ reg |= (dp->video_info.interlaced << 2);
writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
reg &= ~VSYNC_POLARITY_CFG;
- reg |= (dp->video_info->v_sync_polarity << 1);
+ reg |= (dp->video_info.v_sync_polarity << 1);
writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
reg &= ~HSYNC_POLARITY_CFG;
- reg |= (dp->video_info->h_sync_polarity << 0);
+ reg |= (dp->video_info.h_sync_polarity << 0);
writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE;
--
1.9.1
More information about the Linux-rockchip
mailing list