[PATCH v1 7/8] ARM: dts: rockchip: add core rk3228 dtsi

Jeffy Chen jeffy.chen at rock-chips.com
Thu Dec 10 17:53:59 PST 2015


Hi Heiko,

On 2015-12-10 8:32, Heiko Stuebner wrote:
> Hi Jeffy,
>
> Am Mittwoch, 9. Dezember 2015, 17:04:12 schrieb Jeffy Chen:
>> Initial release for rk3228 shared dtsi.
>>
>> Signed-off-by: Jeffy Chen <jeffy.chen at rock-chips.com>
>> ---
>>
>>   arch/arm/boot/dts/rk3228.dtsi | 478 ++++++++++++++++++++++++++++++++++++++++++
>>   1 file changed, 478 insertions(+)
>>   create mode 100644 arch/arm/boot/dts/rk3228.dtsi
>>
>> diff --git a/arch/arm/boot/dts/rk3228.dtsi b/arch/arm/boot/dts/rk3228.dtsi
>> new file mode 100644
>> index 0000000..d6b3e40
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/rk3228.dtsi
>> @@ -0,0 +1,478 @@
>> +/*
>> + * This file is dual-licensed: you can use it either under the terms
>> + * of the GPL or the X11 license, at your option. Note that this dual
>> + * licensing only applies to this file, and not this project as a
>> + * whole.
>> + *
>> + *  a) This file is free software; you can redistribute it and/or
>> + *     modify it under the terms of the GNU General Public License as
>> + *     published by the Free Software Foundation; either version 2 of the
>> + *     License, or (at your option) any later version.
>> + *
>> + *     This file is distributed in the hope that it will be useful,
>> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + *     GNU General Public License for more details.
>> + *
>> + * Or, alternatively,
>> + *
>> + *  b) Permission is hereby granted, free of charge, to any person
>> + *     obtaining a copy of this software and associated documentation
>> + *     files (the "Software"), to deal in the Software without
>> + *     restriction, including without limitation the rights to use,
>> + *     copy, modify, merge, publish, distribute, sublicense, and/or
>> + *     sell copies of the Software, and to permit persons to whom the
>> + *     Software is furnished to do so, subject to the following
>> + *     conditions:
>> + *
>> + *     The above copyright notice and this permission notice shall be
>> + *     included in all copies or substantial portions of the Software.
>> + *
>> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + *     OTHER DEALINGS IN THE SOFTWARE.
>> + */
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/pinctrl/rockchip.h>
>> +#include <dt-bindings/clock/rk3228-cru.h>
>> +#include "skeleton.dtsi"
>> +
>> +/ {
>> +	compatible = "rockchip,rk3228";
>> +
>> +	interrupt-parent = <&gic>;
>> +
>> +	aliases {
>> +		serial0 = &uart0;
>> +		serial1 = &uart1;
>> +		serial2 = &uart2;
>> +	};
>> +
>> +	memory {
>> +		device_type = "memory";
>> +		reg = <0x60000000 0x40000000>;
>> +	};
> The amount of memory is a property of the board
done.
>> +
>> +	cpus {
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
> no enable-method?
>
> As the rk3228 also does not have a pmu, does the newly created
> "rockchip,rk3036-smp" work for you?
unlucky, that doesn't work...and our 3.10 kernel is using psci for 
rk3228's smp ops, maybe i should check that too, but i know nothing 
about psci for now :(
>> +
>> +		cpu0: cpu at f00 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a7";
>> +			reg = <0xf00>;
>> +			resets = <&cru SRST_CORE0>;
>> +			operating-points = <
>> +				/* KHz    uV */
>> +				 816000 1000000
>> +			>;
>> +			clock-latency = <40000>;
>> +			clocks = <&cru ARMCLK>;
>> +		};
>> +
>> +		cpu1: cpu at f01 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a7";
>> +			reg = <0xf01>;
>> +			resets = <&cru SRST_CORE1>;
>> +		};
>> +
>> +		cpu2: cpu at f02 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a7";
>> +			reg = <0xf02>;
>> +			resets = <&cru SRST_CORE2>;
>> +		};
>> +
>> +		cpu3: cpu at f03 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a7";
>> +			reg = <0xf03>;
>> +			resets = <&cru SRST_CORE3>;
>> +		};
>> +	};
>> +
>> +	amba {
>> +		compatible = "arm,amba-bus";
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges;
>> +
>> +		pdma: pdma at 110f0000 {
>> +			compatible = "arm,pl330", "arm,primecell";
>> +			reg = <0x110f0000 0x4000>;
>> +			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
>> +			#dma-cells = <1>;
>> +			clocks = <&cru ACLK_DMAC>;
>> +			clock-names = "apb_pclk";
>> +		};
>> +	};
>> +
>> +	arm-pmu {
>> +		compatible = "arm,cortex-a7-pmu";
>> +		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
>> +			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
>> +			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
>> +			     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
>> +		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
>> +	};
>> +
>> +	timer {
>> +		compatible = "arm,armv7-timer";
>> +		arm,cpu-registers-not-fw-configured;
>> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
>> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
>> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
>> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
>> +		clock-frequency = <24000000>;
>> +	};
>> +
>> +	hdmiphy_phy: hdmiphy_phy {
>> +		compatible = "fixed-clock";
>> +		clock-frequency = <594000000>;
>> +		clock-output-names = "hdmiphy_phy";
>> +		#clock-cells = <0>;
>> +	};
>> +
>> +	phy_50m_out: phy_50m_out {
>> +		compatible = "fixed-clock";
>> +		clock-frequency = <50000000>;
>> +		clock-output-names = "phy_50m_out";
>> +		#clock-cells = <0>;
>> +	};
>> +
>> +	usb480m_phy0: usb480m_phy0 {
>> +		compatible = "fixed-clock";
>> +		clock-frequency = <480000000>;
>> +		clock-output-names = "usb480m_phy0";
>> +		#clock-cells = <0>;
>> +	};
>> +
>> +	usb480m_phy1: usb480m_phy1 {
>> +		compatible = "fixed-clock";
>> +		clock-frequency = <480000000>;
>> +		clock-output-names = "usb480m_phy1";
>> +		#clock-cells = <0>;
>> +	};
> these clocks starting with hdmiphy clock come from IPs in the soc, so the
> relevant drivers should provide them (see my patch series for the picophy,
> or how rk808 and hym8563 do it) - especially as these clocks might get
> turned off in the IP-block itself.
>
> The clock framework can handle orphans, so just leave these out for now
> please.
you're right, done.
>
>> +
>> +	xin24m: oscillator {
>> +		compatible = "fixed-clock";
>> +		clock-frequency = <24000000>;
>> +		clock-output-names = "xin24m";
>> +		#clock-cells = <0>;
>> +	};
>> +
>> +	cru: clock-controller at 110e0000 {
>> +		compatible = "rockchip,rk3228-cru";
>> +		reg = <0x110e0000 0x1000>;
>> +		rockchip,grf = <&grf>;
>> +		#clock-cells = <1>;
>> +		#reset-cells = <1>;
>> +		assigned-clocks = <&cru PLL_GPLL>;
>> +		assigned-clock-rates = <594000000>;
>> +	};
>> +
>> +	gic: interrupt-controller at 32010000 {
> please order by register address, so gic should move quite
> a bit lower.
done.
>> +		compatible = "arm,gic-400";
>> +		interrupt-controller;
>> +		#interrupt-cells = <3>;
>> +		#address-cells = <0>;
>> +
>> +		reg = <0x32011000 0x1000>,
>> +		      <0x32012000 0x1000>;
> please also provide the vgic registers and interrupt.
done.
>
>> +	};
>> +
>> +	grf: syscon at 11000000 {
>> +		compatible = "syscon";
>> +		reg = <0x11000000 0x1000>;
>> +	};
>> +
>> +	timer: timer at 110c0000 {
>> +		compatible = "rockchip,rk3288-timer";
>> +		reg = <0x110c0000 0x20>;
>> +		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
>> +		clocks = <&xin24m>, <&cru PCLK_TIMER>;
>> +		clock-names = "timer", "pclk";
>> +	};
>> +
>> +	emmc: dwmmc at 30020000 {
>> +		compatible = "rockchip,rk3288-dw-mshc";
>> +		clock-frequency = <37500000>;
>> +		clock-freq-min-max = <400000 37500000>;
>> +		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
>> +		<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
>> +		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
>> +		fifo-depth = <0x100>;
>> +		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>> +		reg = <0x30020000 0x4000>;
>> +		broken-cd;
>> +		bus-width = <8>;
>> +		cap-mmc-highspeed;
>> +		mmc-ddr-1_8v;
>> +		disable-wp;
>> +		non-removable;
>> +		num-slots = <1>;
>> +		default-sample-phase = <158>;
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
> please separate board and core properties.
> broken-cd, cap-*, mmc-ddr-1_8v, disable-wp, non-removable
> are per-board properties as they depend on what is connected to
> the controller.
done.
>> +		status = "disabled";
>> +	};
>> +
>> +	pwm0: pwm at 110b0000 {
>> +		compatible = "rockchip,rk3288-pwm";
>> +		reg = <0x110b0000 0x10>;
>> +		#pwm-cells = <3>;
>> +		clocks = <&cru PCLK_PWM>;
>> +		clock-names = "pwm";
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&pwm0_pin>;
>> +		status = "disabled";
>> +	};
>> +
>> +	pwm1: pwm at 110b0010 {
>> +		compatible = "rockchip,rk3288-pwm";
>> +		reg = <0x110b0010 0x10>;
>> +		#pwm-cells = <3>;
>> +		clocks = <&cru PCLK_PWM>;
>> +		clock-names = "pwm";
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&pwm1_pin>;
>> +		status = "disabled";
>> +	};
>> +
>> +	pwm2: pwm at 110b0020 {
>> +		compatible = "rockchip,rk3288-pwm";
>> +		reg = <0x110b0020 0x10>;
>> +		#pwm-cells = <3>;
>> +		clocks = <&cru PCLK_PWM>;
>> +		clock-names = "pwm";
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&pwm2_pin>;
>> +		status = "disabled";
>> +	};
>> +
>> +	pwm3: pwm at 110b0030 {
>> +		compatible = "rockchip,rk3288-pwm";
>> +		reg = <0x110b0030 0x10>;
>> +		#pwm-cells = <2>;
>> +		clocks = <&cru PCLK_PWM>;
>> +		clock-names = "pwm";
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&pwm3_pin>;
>> +		status = "disabled";
>> +	};
>> +
>> +	uart0: serial at 11010000 {
>> +		compatible = "snps,dw-apb-uart";
>> +		reg = <0x11010000 0x100>;
>> +		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
>> +		reg-shift = <2>;
>> +		reg-io-width = <4>;
>> +		clock-frequency = <24000000>;
>> +		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
>> +		clock-names = "baudclk", "apb_pclk";
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
>> +		status = "disabled";
>> +	};
>> +
>> +	uart1: serial at 11020000 {
>> +		compatible = "snps,dw-apb-uart";
>> +		reg = <0x11020000 0x100>;
>> +		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
>> +		reg-shift = <2>;
>> +		reg-io-width = <4>;
>> +		clock-frequency = <24000000>;
>> +		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
>> +		clock-names = "baudclk", "apb_pclk";
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&uart1_xfer>;
>> +		status = "disabled";
>> +	};
>> +
>> +	uart2: serial at 11030000 {
>> +		compatible = "snps,dw-apb-uart";
>> +		reg = <0x11030000 0x100>;
>> +		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
>> +		reg-shift = <2>;
>> +		reg-io-width = <4>;
>> +		clock-frequency = <24000000>;
>> +		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
>> +		clock-names = "baudclk", "apb_pclk";
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&uart2_xfer>;
>> +		status = "disabled";
>> +	};
>> +
>> +
>> +	pinctrl: pinctrl {
>> +		compatible = "rockchip,rk3228-pinctrl";
>> +		rockchip,grf = <&grf>;
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges;
>> +
>> +		gpio0: gpio0 at 11110000 {
>> +			compatible = "rockchip,gpio-bank";
>> +			reg = <0x11110000 0x100>;
>> +			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&cru PCLK_GPIO0>;
>> +
>> +			gpio-controller;
>> +			#gpio-cells = <2>;
>> +
>> +			interrupt-controller;
>> +			#interrupt-cells = <2>;
>> +		};
>> +
>> +		gpio1: gpio1 at 11120000 {
>> +			compatible = "rockchip,gpio-bank";
>> +			reg = <0x11120000 0x100>;
>> +			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&cru PCLK_GPIO1>;
>> +
>> +			gpio-controller;
>> +			#gpio-cells = <2>;
>> +
>> +			interrupt-controller;
>> +			#interrupt-cells = <2>;
>> +		};
>> +
>> +		gpio2: gpio2 at 11130000 {
>> +			compatible = "rockchip,gpio-bank";
>> +			reg = <0x11130000 0x100>;
>> +			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&cru PCLK_GPIO2>;
>> +
>> +			gpio-controller;
>> +			#gpio-cells = <2>;
>> +
>> +			interrupt-controller;
>> +			#interrupt-cells = <2>;
>> +		};
>> +
>> +		gpio3: gpio3 at 11140000 {
>> +			compatible = "rockchip,gpio-bank";
>> +			reg = <0x11140000 0x100>;
>> +			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&cru PCLK_GPIO3>;
>> +
>> +			gpio-controller;
>> +			#gpio-cells = <2>;
>> +
>> +			interrupt-controller;
>> +			#interrupt-cells = <2>;
>> +		};
>> +
>> +		pcfg_pull_up: pcfg-pull-up {
>> +			bias-pull-up;
>> +		};
>> +
>> +		pcfg_pull_down: pcfg-pull-down {
>> +			bias-pull-down;
>> +		};
>> +
>> +		pcfg_pull_none: pcfg-pull-none {
>> +			bias-disable;
>> +		};
>> +
>> +		emmc {
>> +			emmc_clk: emmc-clk {
>> +				rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>;
>> +			};
>> +
>> +			emmc_cmd: emmc-cmd {
>> +				rockchip,pins = <1 22 RK_FUNC_2 &pcfg_pull_none>;
>> +			};
>> +
>> +			emmc_bus8: emmc-bus8 {
>> +				rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
>> +						<1 25 RK_FUNC_2 &pcfg_pull_none>,
>> +						<1 26 RK_FUNC_2 &pcfg_pull_none>,
>> +						<1 27 RK_FUNC_2 &pcfg_pull_none>,
>> +						<1 28 RK_FUNC_2 &pcfg_pull_none>,
>> +						<1 29 RK_FUNC_2 &pcfg_pull_none>,
>> +						<1 30 RK_FUNC_2 &pcfg_pull_none>,
>> +						<1 31 RK_FUNC_2 &pcfg_pull_none>;
>> +			};
>> +		};
>> +
>> +		pwm0 {
>> +			pwm0_pin: pwm0-pin {
>> +				rockchip,pins = <3 21 RK_FUNC_1 &pcfg_pull_none>;
>> +			};
>> +		};
>> +
>> +		pwm1 {
>> +			pwm1_pin: pwm1-pin {
>> +				rockchip,pins = <0 30 RK_FUNC_2 &pcfg_pull_none>;
>> +			};
>> +		};
>> +
>> +		pwm2 {
>> +			pwm2_pin: pwm2-pin {
>> +				rockchip,pins = <1 12 RK_FUNC_2 &pcfg_pull_none>;
>> +			};
>> +		};
>> +
>> +		pwm3 {
>> +			pwm3_pin: pwm3-pin {
>> +				rockchip,pins = <1 11 RK_FUNC_2 &pcfg_pull_none>;
>> +			};
>> +		};
>> +
>> +		uart0 {
>> +			uart0_xfer: uart0-xfer {
>> +				rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>,
>> +						<2 27 RK_FUNC_1 &pcfg_pull_none>;
>> +			};
>> +
>> +			uart0_cts: uart0-cts {
>> +				rockchip,pins = <2 29 RK_FUNC_1 &pcfg_pull_none>;
>> +			};
>> +
>> +			uart0_rts: uart0-rts {
>> +				rockchip,pins = <0 17 RK_FUNC_1 &pcfg_pull_none>;
>> +			};
>> +		};
>> +
>> +		uart1 {
>> +			uart1_xfer: uart1-xfer {
>> +				rockchip,pins = <1 9 RK_FUNC_1 &pcfg_pull_none>,
>> +						<1 10 RK_FUNC_1 &pcfg_pull_none>;
>> +			};
>> +
>> +			uart1_cts: uart1-cts {
>> +				rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>;
>> +			};
>> +
>> +			uart1_rts: uart1-rts {
>> +				rockchip,pins = <1 11 RK_FUNC_1 &pcfg_pull_none>;
>> +			};
>> +		};
>> +
>> +		uart2 {
>> +			uart2_xfer: uart2-xfer {
>> +				rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
>> +						<1 19 RK_FUNC_2 &pcfg_pull_none>;
>> +			};
>> +
>> +			uart2_cts: uart2-cts {
>> +				rockchip,pins = <0 25 RK_FUNC_1 &pcfg_pull_none>;
>> +			};
>> +
>> +			uart2_rts: uart2-rts {
>> +				rockchip,pins = <0 24 RK_FUNC_1 &pcfg_pull_none>;
>> +			};
>> +		};
>> +	};
>> +};
>>
>





More information about the Linux-rockchip mailing list