[PATCH 3/3] ARM: dts: rockchip: add veyron-minnie board
Heiko Stübner
heiko.stuebner at collabora.com
Tue Dec 1 09:19:47 PST 2015
I don't have much luck with patches today ... obviously that is supposed to be
mickey in the subject
Am Dienstag, 1. Dezember 2015, 18:16:55 schrieb Heiko Stübner:
> From: Chris Zhong <zyw at rock-chips.com>
>
> Also known as the Asus Chromebit.
>
> Signed-off-by: Chris Zhong <zyw at rock-chips.com>
> Signed-off-by: Heiko Stuebner <heiko.stuebner at collabora.com>
> ---
> would cool to get an Ack from ChromeOS-people concerning the
> license change to GPL2/X11 - as with the dts before
>
> Also if someone else should be designated as author I would be happy
> got get a shout about that :-) . I did take Chris as he was the one
> submitting the initial mickey dts to the chromeos tree.
>
> And of course it would be cool if anyone could test that on an actual
> mickey device.
>
> Documentation/devicetree/bindings/arm/rockchip.txt | 9 +
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/rk3288-veyron-mickey.dts | 246
> +++++++++++++++++++++ 3 files changed, 256 insertions(+)
> create mode 100644 arch/arm/boot/dts/rk3288-veyron-mickey.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt
> b/Documentation/devicetree/bindings/arm/rockchip.txt index 2f8b35a..2fa0a21
> 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.txt
> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
> @@ -54,6 +54,15 @@ Rockchip platforms device tree bindings
> "google,veyron-jerry-rev3", "google,veyron-jerry",
> "google,veyron", "rockchip,rk3288";
>
> +- Google Mickey (Asus Chromebit CS10):
> + Required root node properties:
> + - compatible = "google,veyron-mickey-rev8",
> "google,veyron-mickey-rev7", + "google,veyron-mickey-rev6",
> "google,veyron-mickey-rev5",
> + "google,veyron-mickey-rev4", "google,veyron-mickey-rev3",
> + "google,veyron-mickey-rev2", "google,veyron-mickey-rev1",
> + "google,veyron-mickey-rev0", "google,veyron-mickey",
> + "google,veyron", "rockchip,rk3288";
> +
> - Google Minnie (Asus Chromebook Flip C100P):
> Required root node properties:
> - compatible = "google,veyron-minnie-rev4",
> "google,veyron-minnie-rev3", diff --git a/arch/arm/boot/dts/Makefile
> b/arch/arm/boot/dts/Makefile index 2f29350..8b49bfc 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -527,6 +527,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> rk3288-veyron-brain.dtb \
> rk3288-veyron-jaq.dtb \
> rk3288-veyron-jerry.dtb \
> + rk3288-veyron-mickey.dtb \
> rk3288-veyron-minnie.dtb \
> rk3288-veyron-pinky.dtb \
> rk3288-veyron-speedy.dtb
> diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts
> b/arch/arm/boot/dts/rk3288-veyron-mickey.dts new file mode 100644
> index 0000000..365382a
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
> @@ -0,0 +1,246 @@
> +/*
> + * Google Veyron Mickey Rev 0 board device tree source
> + *
> + * Copyright 2015 Google, Inc
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "rk3288-veyron.dtsi"
> +
> +/ {
> + model = "Google Mickey";
> + compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
> + "google,veyron-mickey-rev6", "google,veyron-mickey-rev5",
> + "google,veyron-mickey-rev4", "google,veyron-mickey-rev3",
> + "google,veyron-mickey-rev2", "google,veyron-mickey-rev1",
> + "google,veyron-mickey-rev0", "google,veyron-mickey",
> + "google,veyron", "rockchip,rk3288";
> +
> + vcc_5v: vcc-5v {
> + vin-supply = <&vcc33_sys>;
> + };
> +
> + vcc33_io: vcc33_io {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc33_io";
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc33_sys>;
> + };
> +};
> +
> +&cpu_thermal {
> + /delete-node/ trips;
> + /delete-node/ cooling-maps;
> +
> + trips {
> + cpu_alert_almost_warm: cpu_alert_almost_warm {
> + temperature = <63000>; /* millicelsius */
> + hysteresis = <2000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu_alert_warm: cpu_alert_warm {
> + temperature = <65000>; /* millicelsius */
> + hysteresis = <2000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu_alert_almost_hot: cpu_alert_almost_hot {
> + temperature = <80000>; /* millicelsius */
> + hysteresis = <2000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu_alert_hot: cpu_alert_hot {
> + temperature = <82000>; /* millicelsius */
> + hysteresis = <2000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu_alert_hotter: cpu_alert_hotter {
> + temperature = <84000>; /* millicelsius */
> + hysteresis = <2000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu_alert_very_hot: cpu_alert_very_hot {
> + temperature = <85000>; /* millicelsius */
> + hysteresis = <2000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu_crit: cpu_crit {
> + temperature = <90000>; /* millicelsius */
> + hysteresis = <2000>; /* millicelsius */
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + /*
> + * After 1st level, throttle the CPU down to as low as 1.4 GHz
> + * and don't let the GPU go faster than 400 MHz. Note that we
> + * won't throttle the GPU lower than 400 MHz due to CPU
> + * heat--we'll let the GPU do the rest itself.
> + */
> + cpu_warm_limit_cpu {
> + trip = <&cpu_alert_warm>;
> + cooling-device =
> + <&cpu0 THERMAL_NO_LIMIT 4>;
> + };
> +
> + /*
> + * Add some discrete steps to help throttling system deal
> + * with the fact that there are two passive cooling devices:
> + * the CPU and the GPU.
> + *
> + * - 1.2 GHz - 1.0 GHz (almost hot)
> + * - 800 MHz (hot)
> + * - 800 MHz - 696 MHz (hotter)
> + * - 696 MHz - min (very hot)
> + *
> + * Note:
> + * - 800 MHz appears to be a "sweet spot" for me. I can run
> + * some pretty serious workload here and be happy.
> + * - After 696 MHz we stop lowering voltage, so throttling
> + * past there is less effective.
> + */
> + cpu_almost_hot_limit_cpu {
> + trip = <&cpu_alert_almost_hot>;
> + cooling-device =
> + <&cpu0 5 6>;
> + };
> + cpu_hot_limit_cpu {
> + trip = <&cpu_alert_hot>;
> + cooling-device =
> + <&cpu0 7 7>;
> + };
> + cpu_hotter_limit_cpu {
> + trip = <&cpu_alert_hotter>;
> + cooling-device =
> + <&cpu0 7 8>;
> + };
> + cpu_very_hot_limit_cpu {
> + trip = <&cpu_alert_very_hot>;
> + cooling-device =
> + <&cpu0 8 THERMAL_NO_LIMIT>;
> + };
> + };
> +};
> +
> +&i2c2 {
> + status = "disabled";
> +};
> +
> +&i2c4 {
> + status = "disabled";
> +};
> +
> +&i2s {
> + status = "okay";
> + clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out";
> + clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>;
> +};
> +
> +&rk808 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
> + dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
> + <&gpio7 15 GPIO_ACTIVE_HIGH>;
> +
> + /delete-property/ vcc6-supply;
> + /delete-property/ vcc12-supply;
> +
> + vcc11-supply = <&vcc33_sys>;
> +
> + regulators {
> + /* vcc33_io is sourced directly from vcc33_sys */
> + /delete-node/ LDO_REG1;
> + /delete-node/ LDO_REG7;
> +
> + /* This is not a pwren anymore, but the real power supply */
> + vdd10_lcd: LDO_REG7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-name = "vdd10_lcd";
> + regulator-suspend-mem-disabled;
> + };
> +
> + vcc18_lcd: LDO_REG8 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc18_lcd";
> + regulator-suspend-mem-disabled;
> + };
> + };
> +};
> +
> +&pinctrl {
> + hdmi {
> + power_hdmi_on: power-hdmi-on {
> + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + pmic {
> + dvs_1: dvs-1 {
> + rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> +
> + dvs_2: dvs-2 {
> + rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> + };
> +};
> +
> +&usb_host0_ehci {
> + status = "disabled";
> +};
> +
> +&usb_host1 {
> + status = "disabled";
> +};
> +
> +&vcc50_hdmi {
> + enable-active-high;
> + gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&power_hdmi_on>;
> +};
More information about the Linux-rockchip
mailing list