[PATCH v4 0/16] Add Analogix Core Display Port Driver
Yakir Yang
ykk at rock-chips.com
Mon Aug 31 22:46:11 PDT 2015
Hi all,
The Samsung Exynos eDP controller and Rockchip RK3288 eDP controller
share the same IP, so a lot of parts can be re-used. I split the common
code into bridge directory, then rk3288 and exynos only need to keep
some platform code. Cause I can't find the exact IP name of exynos dp
controller, so I decide to name dp core driver with "analogix" which I
find in rk3288 eDP TRM ;)
Beyond that, there are three light registers setting differents bewteen
exynos and rk3288.
1. RK3288 have five special pll resigters which not indicata in exynos
dp controller.
2. The address of DP_PHY_PD(dp phy power manager register) are different
between rk3288 and exynos.
3. Rk3288 and exynos have different setting with AUX_HW_RETRY_CTL(dp debug
register).
I have verified this series on two kinds of rockchip platform board, one
is rk3288 sdk board which connect with a 2K display port monitor, the other
is google jerry chromebook which connect with a eDP screen "cnm,n116bgeea2",
both of them works rightlly.
I haven't verified the dp function on samsung platform, cause I haven't got
exynos boards. I can only ensure that there are no build error on samsung
platform, wish some samsung guys help to test. ;)
Besides, The v4 version have been rebased on linux-next master branch
(git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git), tag name is
next-20150828 (latest is next-2015-0831). So I think if someone try to apply
this series, there would be no conflict ;)
Thanks,
- Yakir
Changes in v4:
- Take Romain suggest, rebase on linux-next branch.
- Take Rob suggest, update "analogix,hpd-gpios" to "hpd-gpios" DT propery.
- Take Jingoo suggest, rename "analogix_dp-exynos.c" file name to "exynos_dp.c"
- Take Archit suggest, create a separate folder for analogix code in bridge/
- Take Jingoo Han suggest, update commit message more readable.
- Adjust the order from 05 to 04
- Take Krzysztof suggest, provide backword compatibility with samsung.
- Take Thierry suggest, add "color-depth" and "color-space" dynamic parsed.
- Take Krzysztof suggest, split all DTS changes, and provide backward compatibility.
Mark old properties as deprecated but still support them.
- Take Rob suggest, update "analogix,hpd-gpio" to "hpd-gpios" prop name.
- Take Thierry suggest, deprecated some properties which could parsed from Edid/Mode/DPCD.
"analogix,color-space" & "analogix,color-depth" &
"analogix,link-rate" & "analogix,lane-count" &
"analogix,ycbcr-coeff" & "analogix,dynamic-range" &
"vsync-active-high" & "hsync-active-high" & "interlaces"
- Take Krzysztof suggest, separate all DTS changes to a separate patch.
- Remove some deprecated DT properties in rockchip dp document.
- Take Kishon suggest, add commit message, and remove the redundant
rockchip_dp_phy_init() function, move those code to probe() method.
And remove driver .owner number.
- Take Thierry suggest, seprate the link-rate and lane-count limit
out with the device_type flag.
- Take Jingoo suggest, add commit messages.
- Call drm_panel_prepare() in .get_modes function, ensure panel should
power on before driver try to read edid message.
Changes in v3:
- Take Thierry Reding suggest, move exynos's video_timing code
to analogix_dp-exynos platform driver, add get_modes method
to struct analogix_dp_plat_data.
- Take Heiko suggest, rename some "samsung*" dts propery to "analogix*".
- Take Thierry Reding suggest, link_rate and lane_count shouldn't config to
the DT property value directly, but we can take those as hardware limite.
For example, RK3288 only support 4 physical lanes of 2.7/1.62 Gbps/lane,
so DT property would like "link-rate = 0x0a" "lane-count = 4".
- Take Thierry Reding suggest, dynamic parse video timing info from
struct drm_display_mode and struct drm_display_info.
- Take Heiko suggest, add devicetree binding documents.
- Take Thierry Reding suggest, remove sync pol & colorimetry properies
from the new analogix dp driver devicetree binding.
- Update the exist exynos dtsi file with the latest DP DT properies.
- Take Thierry Reding and Heiko suggest, leave "sclk_edp_24m" to rockchip
dp phy driver which name to "24m", and leave "sclk_edp" to analogix dp
core driver which name to "dp", and leave "pclk_edp" to rockchip dp platform
driver which name to "pclk".
- Take Heiko suggest, add devicetree binding document.
- Take Heiko suggest, remove "rockchip,panel" DT property, take use of remote
point to get panel node.
- Add the new function point analogix_dp_platdata.get_modes init.
- Take Heiko suggest, add rockchip dp phy driver,
collect the phy clocks and power control.
- Add "analogix,need-force-hpd" to indicate whether driver need foce
hpd when hpd detect failed.
- move dp hpd detect to connector detect function.
- Add edid modes parse support
Changes in v2:
- Take Joe Preches advise, improved commit message more readable, and
avoid using some uncommon style like bellow:
- retval = exynos_dp_read_bytes_from_i2c(...
...)
+ retval =
+ exynos_dp_read_bytes_from_i2c(......);
- Take Jingoo Han suggest, just remove my name from author list.
- Take Jingoo Han suggest, remove new copyright
- Fix compiled failed dut to analogix_dp_device misspell
- Take Heiko suggest, get panel node with remote-endpoint method,
and create devicetree binding for driver.
- Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m",
leave those clock to rockchip dp phy driver.
- Add GNU license v2 declared and samsung copyright
- Fix compile failed dut to phy_pd_addr variable misspell error
Mark Yao (1):
drm: rockchip: add bpc and color mode setting
Yakir Yang (15):
drm: exynos/dp: fix code style
drm: exynos/dp: convert to drm bridge mode
drm: bridge: analogix/dp: split exynos dp driver to bridge dir
drm: bridge: analogix/dp: remove duplicate configuration of link rate
and link count
drm: bridge: analogix/dp: dynamic parse sync_pol & interlace &
colorimetry
Documentation: drm/bridge: add document for analogix_dp
ARM: dts: exynos/dp: remove some properties that deprecated by
analogix_dp driver
drm: rockchip/dp: add rockchip platform dp driver
phy: Add driver for rockchip Display Port PHY
drm: bridge: analogix/dp: add platform device type support
drm: bridge: analogix/dp: add some rk3288 special registers setting
drm: bridge: analogix/dp: add max link rate and lane count limit for
RK3288
drm: bridge: analogix/dp: try force hpd after plug in lookup failed
drm: bridge: analogix/dp: move hpd detect to connector detect function
drm: bridge: analogix/dp: add edid modes parse in get_modes method
.../devicetree/bindings/drm/bridge/analogix_dp.txt | 52 +
.../devicetree/bindings/phy/rockchip-dp-phy.txt | 26 +
.../bindings/video/analogix_dp-rockchip.txt | 75 +
.../devicetree/bindings/video/exynos_dp.txt | 64 +-
arch/arm/boot/dts/exynos5250-arndale.dts | 2 -
arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 -
arch/arm/boot/dts/exynos5250-snow.dts | 4 +-
arch/arm/boot/dts/exynos5250-spring.dts | 4 +-
arch/arm/boot/dts/exynos5420-peach-pit.dts | 4 +-
arch/arm/boot/dts/exynos5420-smdk5420.dts | 2 -
arch/arm/boot/dts/exynos5800-peach-pi.dts | 4 +-
drivers/gpu/drm/bridge/Kconfig | 2 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/analogix/Kconfig | 4 +
drivers/gpu/drm/bridge/analogix/Makefile | 1 +
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 1409 +++++++++++++++++++
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 286 ++++
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 1294 ++++++++++++++++++
.../analogix/analogix_dp_reg.h} | 270 ++--
drivers/gpu/drm/exynos/Kconfig | 3 +-
drivers/gpu/drm/exynos/Makefile | 2 +-
drivers/gpu/drm/exynos/exynos_dp.c | 355 +++++
drivers/gpu/drm/exynos/exynos_dp_core.c | 1427 --------------------
drivers/gpu/drm/exynos/exynos_dp_core.h | 281 ----
drivers/gpu/drm/exynos/exynos_dp_reg.c | 1263 -----------------
drivers/gpu/drm/rockchip/Kconfig | 9 +
drivers/gpu/drm/rockchip/Makefile | 1 +
drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 416 ++++++
drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 2 +-
drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 2 +-
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 33 +-
drivers/phy/Kconfig | 7 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-rockchip-dp.c | 166 +++
include/drm/bridge/analogix_dp.h | 40 +
35 files changed, 4347 insertions(+), 3167 deletions(-)
create mode 100644 Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
create mode 100644 Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
create mode 100644 Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
create mode 100644 drivers/gpu/drm/bridge/analogix/Kconfig
create mode 100644 drivers/gpu/drm/bridge/analogix/Makefile
create mode 100644 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
create mode 100644 drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
create mode 100644 drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
rename drivers/gpu/drm/{exynos/exynos_dp_reg.h => bridge/analogix/analogix_dp_reg.h} (62%)
create mode 100644 drivers/gpu/drm/exynos/exynos_dp.c
delete mode 100644 drivers/gpu/drm/exynos/exynos_dp_core.c
delete mode 100644 drivers/gpu/drm/exynos/exynos_dp_core.h
delete mode 100644 drivers/gpu/drm/exynos/exynos_dp_reg.c
create mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
create mode 100644 drivers/phy/phy-rockchip-dp.c
create mode 100644 include/drm/bridge/analogix_dp.h
--
2.1.2
More information about the Linux-rockchip
mailing list