[PATCH 1/5] DMA: pl330: support burst mode for dev-to-mem and mem-to-dev transmit

[Shawn Lin]

在 2015/8/29 2:19, Sonny Rao 写道:
> On Thu, Aug 27, 2015 at 6:28 AM, Shawn Lin <shawn.lin at rock-chips.com> wrote:
>> 在 2015/8/27 20:57, Krzysztof Kozlowski 写道:
>>>
>>> 2015-08-27 17:48 GMT+09:00 Shawn Lin <shawn.lin at rock-chips.com>:
>>>>
>>>>
>>>> This patch adds to support burst mode for dev-to-mem and
>>>> mem-to-dev transmit.
>>>>
>>>> Signed-off-by: Boojin Kim <boojin.kim at samsung.com>
>>>> Signed-off-by: Addy Ke <addy.ke at rock-chips.com>
>>>> Signed-off-by: Shawn Lin <shawn.lin at rock-chips.com>
>>>> cc: Heiko Stuebner <heiko at sntech.de>
>>>> cc: Doug Anderson <dianders at chromium.org>
>>>> cc: Olof Johansson <olofj at google.com>
>>>> Reviewed-and-tested-by: Sonny Rao <sonnyrao at chromium.org>
>>>
>>>
>>> For the entire patchset: I would prefer to see someone's
>>> reviewed/tested tag in his response. Sending a version 1 of patchset
>>> (regardless of Boojin Kim's work two years ago) with such tag could
>>> mean anything. I cannot verify it easily (unless digging somewhere...
>>> or asking people). You could add for example: Reviewed-by Santa Claus.
>>> Should I sent a letter to him asking for confirmation? :)
>>>
>>
>> :) yes, you are right. I should comply with the rule, even if the patchest
>> had been reviewed or tested by someone on another tree.
>
> Hi, yeah I reviewed on a different tree, so you shouldn't put that tag
> here, thanks for removing it.
> I can re-review if you'd like.
>

Hi, sunny, Thanks for reply.
It's very great if you can help me re-review the patchset here. :)

>>
>>
>>> More seriously - reviewed-by is a statement (please look at
>>> Documentation/SubmittingPatches) and you cannot force someone to make
>>> that statement. He must make such statement on his own.
>>>
>>> That's all from my side since I don't feel skilled enough to review the
>>> code.
>>>
>>> Best regards,
>>> Krzysztof
>>>
>>>>
>>>> ---
>>>>
>>>>    drivers/dma/pl330.c | 18 ++++++++++++------
>>>>    1 file changed, 12 insertions(+), 6 deletions(-)
>>>>
>>>> diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
>>>> index ecab4ea0..0d544d2 100644
>>>> --- a/drivers/dma/pl330.c
>>>> +++ b/drivers/dma/pl330.c
>>>> @@ -1141,10 +1141,13 @@ static inline int _ldst_devtomem(unsigned
>>>> dry_run, u8 buf[],
>>>>                   const struct _xfer_spec *pxs, int cyc)
>>>>    {
>>>>           int off = 0;
>>>> +       enum pl330_cond cond;
>>>> +
>>>> +       cond = (pxs->desc->rqcfg.brst_len == 1) ? SINGLE : BURST;
>>>>
>>>>           while (cyc--) {
>>>> -               off += _emit_WFP(dry_run, &buf[off], SINGLE,
>>>> pxs->desc->peri);
>>>> -               off += _emit_LDP(dry_run, &buf[off], SINGLE,
>>>> pxs->desc->peri);
>>>> +               off += _emit_WFP(dry_run, &buf[off], cond,
>>>> pxs->desc->peri);
>>>> +               off += _emit_LDP(dry_run, &buf[off], cond,
>>>> pxs->desc->peri);
>>>>                   off += _emit_ST(dry_run, &buf[off], ALWAYS);
>>>>                   off += _emit_FLUSHP(dry_run, &buf[off],
>>>> pxs->desc->peri);
>>>>           }
>>>> @@ -1156,11 +1159,14 @@ static inline int _ldst_memtodev(unsigned
>>>> dry_run, u8 buf[],
>>>>                   const struct _xfer_spec *pxs, int cyc)
>>>>    {
>>>>           int off = 0;
>>>> +       enum pl330_cond cond;
>>>> +
>>>> +       cond = (pxs->desc->rqcfg.brst_len == 1) ? SINGLE : BURST;
>>>>
>>>>           while (cyc--) {
>>>> -               off += _emit_WFP(dry_run, &buf[off], SINGLE,
>>>> pxs->desc->peri);
>>>> +               off += _emit_WFP(dry_run, &buf[off], cond,
>>>> pxs->desc->peri);
>>>>                   off += _emit_LD(dry_run, &buf[off], ALWAYS);
>>>> -               off += _emit_STP(dry_run, &buf[off], SINGLE,
>>>> pxs->desc->peri);
>>>> +               off += _emit_STP(dry_run, &buf[off], cond,
>>>> pxs->desc->peri);
>>>>                   off += _emit_FLUSHP(dry_run, &buf[off],
>>>> pxs->desc->peri);
>>>>           }
>>>>
>>>> @@ -2557,7 +2563,7 @@ static struct dma_async_tx_descriptor
>>>> *pl330_prep_dma_cyclic(
>>>>
>>>>                   desc->rqtype = direction;
>>>>                   desc->rqcfg.brst_size = pch->burst_sz;
>>>> -               desc->rqcfg.brst_len = 1;
>>>> +               desc->rqcfg.brst_len = pch->burst_len;
>>>>                   desc->bytes_requested = period_len;
>>>>                   fill_px(&desc->px, dst, src, period_len);
>>>>
>>>> @@ -2702,7 +2708,7 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct
>>>> scatterlist *sgl,
>>>>                   }
>>>>
>>>>                   desc->rqcfg.brst_size = pch->burst_sz;
>>>> -               desc->rqcfg.brst_len = 1;
>>>> +               desc->rqcfg.brst_len = pch->burst_len;
>>>>                   desc->rqtype = direction;
>>>>                   desc->bytes_requested = sg_dma_len(sg);
>>>>           }
>>>> --
>>>> 2.3.7
>>>>
>>>>
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe dmaengine" in
>>>> the body of a message to majordomo at vger.kernel.org
>>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>>
>>>
>>>
>>>
>>
>>
>> --
>> Best Regards
>> Shawn Lin
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at  http://www.tux.org/lkml/
>
>
>


-- 
Best Regards
Shawn Lin