[PATCH v1 3/3] clk: rockchip: add clock controller for rk3036

Heiko Stuebner heiko at sntech.de
Fri Aug 28 02:54:50 PDT 2015


Hi,

Am Freitag, 28. August 2015, 13:46:48 schrieb Xing Zheng:
> Add the clock tree definition for the new rk3036 SoC,
> but there are some issues to be fixed:
> 1. soc will crash if gpll run rate_change_remuxed
> 2. rk3036_clk_suspend and rk3036_clk_resume should be done
>    in clk-rk3036.c
> 
> ---
> 
> Changes in v1:
> Signed-off-by: Xing Zheng <zhengxing at rock-chips.com>
> 
>  drivers/clk/rockchip/Makefile          |    1 +
>  drivers/clk/rockchip/clk-pll.c         |  247 ++++++++++++++-

please split this into separate patches.
- addition of the new pll type
- three patches for binding-document, dt-binding header and clock controller
  like in "clk: rockchip: add support for the clock-tree of the rk3368"
  patches 4, 5 and 7:
  "dt-bindings: add documentation of rk3036 clock controller"
  "clk: rockchip: add dt-binding header for rk3036"
  "clk: rockchip: add rk3036 clock controller"

  so you should get in sum 4 clock patches.

[0] http://lists.infradead.org/pipermail/linux-rockchip/2015-July/003394.html


>  drivers/clk/rockchip/clk-rk3036.c      |  539
> ++++++++++++++++++++++++++++++++ drivers/clk/rockchip/clk.h             |  
> 30 ++
>  include/dt-bindings/clock/rk3036-cru.h |  247 +++++++++++++++
>  5 files changed, 1063 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/clk/rockchip/clk-rk3036.c
>  create mode 100644 include/dt-bindings/clock/rk3036-cru.h
> 
> diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile
> index b27edd6..d599829 100644
> --- a/drivers/clk/rockchip/Makefile
> +++ b/drivers/clk/rockchip/Makefile
> @@ -10,6 +10,7 @@ obj-y	+= clk-inverter.o
>  obj-y	+= clk-mmc-phase.o
>  obj-$(CONFIG_RESET_CONTROLLER)	+= softrst.o
> 
> +obj-y	+= clk-rk3036.o
>  obj-y	+= clk-rk3188.o
>  obj-y	+= clk-rk3288.o
>  obj-y	+= clk-rk3368.o
> diff --git a/drivers/clk/rockchip/clk-pll.c b/drivers/clk/rockchip/clk-pll.c
> index 96903ae..cf56826 100644
> --- a/drivers/clk/rockchip/clk-pll.c
> +++ b/drivers/clk/rockchip/clk-pll.c
> @@ -2,6 +2,9 @@
>   * Copyright (c) 2014 MundoReader S.L.
>   * Author: Heiko Stuebner <heiko at sntech.de>
>   *
> + * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
> + * Author: Xing Zheng <zhengxing at rock-chips.com>
> + *
>   * This program is free software; you can redistribute it and/or modify
>   * it under the terms of the GNU General Public License as published by
>   * the Free Software Foundation; either version 2 of the License, or
> @@ -48,6 +51,8 @@ struct rockchip_clk_pll {
>  #define to_rockchip_clk_pll_nb(nb) \
>  			container_of(nb, struct rockchip_clk_pll, clk_nb)
> 
> +static int rockchip_rk3036_pll_wait_lock(struct rockchip_clk_pll *pll);
> +
>  static const struct rockchip_pll_rate_table *rockchip_get_pll_settings(
>  			    struct rockchip_clk_pll *pll, unsigned long rate)
>  {
> @@ -90,6 +95,11 @@ static int rockchip_pll_wait_lock(struct rockchip_clk_pll
> *pll) unsigned int val;
>  	int delay = 24000000, ret;
> 
> +	/* the plls of rk3036 wait lock */
> +	if (pll->type == pll_rk3036 || pll->lock_offset == -1) {
> +		return rockchip_rk3036_pll_wait_lock(pll);
> +	}
> +

according to the rk3036 trm I have the GRF_SOC_STATUS0 [6:4] also contains the 
pll lock status like on the other socs. So you could just use the default 
mechanism of asking the GRF lock status like the other socs do, without 
needing to override the wait_lock .


>  	while (delay > 0) {
>  		ret = regmap_read(grf, pll->lock_offset, &val);
>  		if (ret) {
> @@ -305,6 +315,235 @@ static void rockchip_rk3066_pll_init(struct clk_hw
> *hw) rockchip_rk3066_pll_set_rate(hw, drate, prate);
>  	}
>  }
> +/**
> + * PLL used in RK3036
> + */
> +
> +#define RK3036_PLL_RESET_DELAY(nr)	((nr * 500) / 24 + 1)
> +
> +#define RK3036_PLLCON(i)			(i * 0x4)
> +#define RK3036_PLLCON0_FBDIV_MASK		0xfff
> +#define RK3036_PLLCON0_FBDIV_SHIFT		0
> +#define RK3036_PLLCON0_POSTDIV1_MASK		0x7
> +#define RK3036_PLLCON0_POSTDIV1_SHIFT		12
> +#define RK3036_PLLCON1_REFDIV_MASK		0x3f
> +#define RK3036_PLLCON1_REFDIV_SHIFT		0
> +#define RK3036_PLLCON1_POSTDIV2_MASK		0x7
> +#define RK3036_PLLCON1_POSTDIV2_SHIFT		6
> +#define RK3036_PLLCON1_DSMPD_MASK		0x1
> +#define RK3036_PLLCON1_DSMPD_SHIFT		12
> +#define RK3036_PLLCON2_FRAC_MASK		0xffffff
> +#define RK3036_PLLCON2_FRAC_SHIFT		0
> +
> +#define RK3036_MODECON				0x40
> +#define RK3036_MODECON_AWM			(1 << 0)  /* apll work mode */
> +
> +#define RK3036_PLLCON0_BYPASS			(1 << 15)
> +#define RK3036_PLLCON1_LOCK_STATUS		(1 << 10)
> +#define RK3036_PLLCON1_RESET			(1 << 14)
> +
> +static int rockchip_rk3036_pll_wait_lock(struct rockchip_clk_pll *pll)
> +{
> +	u32 pllcon;
> +	int delay = 24000000;
> +
> +	/* poll check the lock status in rk3036 xPLLCON1 */
> +	while (delay > 0) {
> +		pllcon = readl_relaxed(pll->reg_base + RK3036_PLLCON(1));
> +		if (pllcon & RK3036_PLLCON1_LOCK_STATUS)
> +			return 0;
> +
> +		delay--;
> +	}
> +
> +	pr_err("%s: timeout waiting for pll to lock\n", __func__);
> +	return -ETIMEDOUT;
> +}
> +
> +static unsigned long rockchip_rk3036_pll_recalc_rate(struct clk_hw *hw,
> +						     unsigned long prate)
> +{
> +	struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
> +	unsigned int fbdiv, postdiv1, refdiv, postdiv2, dsmpd, frac;
> +	u64 rate64 = prate;
> +	u32 pllcon;
> +
> +	pllcon = readl_relaxed(pll->reg_base + RK3036_PLLCON(0));
> +	fbdiv = ((pllcon >> RK3036_PLLCON0_FBDIV_SHIFT) &
> RK3036_PLLCON0_FBDIV_MASK); +	postdiv1 = ((pllcon >>
> RK3036_PLLCON0_POSTDIV1_SHIFT) & RK3036_PLLCON0_POSTDIV1_MASK); +
> +	pllcon = readl_relaxed(pll->reg_base + RK3036_PLLCON(1));
> +	refdiv = ((pllcon >> RK3036_PLLCON1_REFDIV_SHIFT) &
> RK3036_PLLCON1_REFDIV_MASK); +	postdiv2 = ((pllcon >>
> RK3036_PLLCON1_POSTDIV2_SHIFT) & RK3036_PLLCON1_POSTDIV2_MASK); +	dsmpd =
> ((pllcon >> RK3036_PLLCON1_DSMPD_SHIFT) & RK3036_PLLCON1_DSMPD_MASK); +
> +	pllcon = readl_relaxed(pll->reg_base + RK3036_PLLCON(2));
> +	frac = ((pllcon >> RK3036_PLLCON2_FRAC_SHIFT) & RK3036_PLLCON2_FRAC_MASK);
> +
> +	rate64 *= fbdiv;
> +	do_div(rate64, refdiv);
> +
> +	if (dsmpd == 0) {
> +		/* fractional mode */
> +		u64 frac_rate64 = prate * frac;
> +
> +		do_div(frac_rate64, refdiv);
> +		rate64 += frac_rate64 >> 24;
> +	}
> +
> +	do_div(rate64, postdiv1);
> +	do_div(rate64, postdiv2);
> +
> +	return (unsigned long)rate64;
> +}
> +
> +static int rockchip_rk3036_pll_set_rate(struct clk_hw *hw, unsigned long
> drate, +					unsigned long prate)
> +{
> +	struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
> +	const struct rockchip_pll_rate_table *rate;
> +	unsigned long old_rate = rockchip_rk3036_pll_recalc_rate(hw, prate);
> +	struct regmap *grf = rockchip_clk_get_grf();
> +	struct clk_mux *pll_mux = &pll->pll_mux;
> +	const struct clk_ops *pll_mux_ops = pll->pll_mux_ops;
> +	int rate_change_remuxed = 0;
> +	int cur_parent;
> +	int ret;
> +
> +	if (IS_ERR(grf)) {
> +		pr_debug("%s: grf regmap not available, aborting rate change\n",
> +			 __func__);
> +		return PTR_ERR(grf);
> +	}
> +
> +	pr_debug("%s: changing %s from %lu to %lu with a parent rate of %lu\n",
> +		 __func__, __clk_get_name(hw->clk), old_rate, drate, prate);
> +
> +	/* Get required rate settings from table */
> +	rate = rockchip_get_pll_settings(pll, drate);
> +	if (!rate) {
> +		pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
> +			drate, __clk_get_name(hw->clk));
> +		return -EINVAL;
> +	}
> +
> +	pr_debug("%s: rate settings for %lu fbdiv: %d, postdiv1: %d, refdiv: %d,
> postdiv2: %d, dsmpd: %d, frac: %d\n", +		__func__, rate->rate,
> +		rate->fbdiv, rate->postdiv1, rate->refdiv, rate->postdiv2, rate-
>dsmpd,
> rate->frac); +
> +	cur_parent = pll_mux_ops->get_parent(&pll_mux->hw);
> +	if (cur_parent == PLL_MODE_NORM) {
> +		pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_SLOW);
> +		rate_change_remuxed = 1;
> +	}
> +
> +	/* enter reset mode */
> +	writel(HIWORD_UPDATE(1, RK3036_PLLCON1_RESET, 0), pll->reg_base +
> RK3036_PLLCON(1)); +
> +	/* update pll values */
> +	writel_relaxed(HIWORD_UPDATE(rate->fbdiv, RK3036_PLLCON0_FBDIV_MASK,
> +					  RK3036_PLLCON0_FBDIV_SHIFT) |
> +		       HIWORD_UPDATE(rate->postdiv1, RK3036_PLLCON0_POSTDIV1_MASK,
> +					     RK3036_PLLCON0_POSTDIV1_SHIFT),
> +		       pll->reg_base + RK3036_PLLCON(0));
> +
> +	writel_relaxed(HIWORD_UPDATE(rate->refdiv, RK3036_PLLCON1_REFDIV_MASK,
> +						   RK3036_PLLCON1_REFDIV_SHIFT) |
> +		       HIWORD_UPDATE(rate->postdiv2, RK3036_PLLCON1_POSTDIV2_MASK,
> +						     RK3036_PLLCON1_POSTDIV2_SHIFT) |
> +		       HIWORD_UPDATE(rate->dsmpd, RK3036_PLLCON1_DSMPD_MASK,
> +						  RK3036_PLLCON1_DSMPD_SHIFT),
> +		       pll->reg_base + RK3036_PLLCON(1));
> +
> +	writel_relaxed(HIWORD_UPDATE(rate->frac, RK3036_PLLCON2_FRAC_MASK,
> +						 RK3036_PLLCON2_FRAC_SHIFT),
> +		       pll->reg_base + RK3036_PLLCON(2));
> +
> +	/* recover normal mode and wait the reset_delay */
> +	writel(HIWORD_UPDATE(0, RK3036_PLLCON1_RESET, 0), pll->reg_base +
> RK3036_PLLCON(1)); +	udelay(RK3036_PLL_RESET_DELAY(rate->refdiv));
> +
> +	/* wait for the pll to lock */
> +	ret = rockchip_pll_wait_lock(pll);
> +	if (ret) {
> +		pr_warn("%s: pll did not lock, trying to restore old rate %lu\n",
> +			__func__, old_rate);
> +		rockchip_rk3036_pll_set_rate(hw, old_rate, prate);
> +	}
> +
> +#if 0 /* FIXME: soc will crash if gpll run here */
> +	if (rate_change_remuxed)
> +		pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_NORM);
> +#endif

please don't leave commented code ("if 0") around and we should of course find 
out what is failing beforehand, so this can be enabled again.

Because as the code stands now, you're running on the gpll all the time.


> +
> +	return ret;
> +}
> +static void rockchip_rk3036_pll_init(struct clk_hw *hw)
> +{
> +	struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
> +	const struct rockchip_pll_rate_table *rate;
> +	unsigned int fbdiv, postdiv1, refdiv, postdiv2, dsmpd, frac;
> +	unsigned long drate;
> +	u32 pllcon;
> +
> +	if (!(pll->flags & ROCKCHIP_PLL_SYNC_RATE))
> +		return;
> +
> +	drate = __clk_get_rate(hw->clk);
> +	rate = rockchip_get_pll_settings(pll, drate);
> +
> +	/* when no rate setting for the current rate, rely on clk_set_rate */
> +	if (!rate)
> +		return;
> +
> +	pllcon = readl_relaxed(pll->reg_base + RK3036_PLLCON(0));
> +	fbdiv = ((pllcon >> RK3036_PLLCON0_FBDIV_SHIFT) &
> RK3036_PLLCON0_FBDIV_MASK); +	postdiv1 = ((pllcon >>
> RK3036_PLLCON0_POSTDIV1_SHIFT) & RK3036_PLLCON0_POSTDIV1_MASK); +
> +	pllcon = readl_relaxed(pll->reg_base + RK3036_PLLCON(1));
> +	refdiv = ((pllcon >> RK3036_PLLCON1_REFDIV_SHIFT) &
> RK3036_PLLCON1_REFDIV_MASK); +	postdiv2 = ((pllcon >>
> RK3036_PLLCON1_POSTDIV2_SHIFT) & RK3036_PLLCON1_POSTDIV2_MASK); +	dsmpd =
> ((pllcon >> RK3036_PLLCON1_DSMPD_SHIFT) & RK3036_PLLCON1_DSMPD_MASK); +
> +	pllcon = readl_relaxed(pll->reg_base + RK3036_PLLCON(2));
> +	frac = ((pllcon >> RK3036_PLLCON2_FRAC_SHIFT) & RK3036_PLLCON2_FRAC_MASK);
> +
> +	pr_info("%s: pll %s@%lu: Hz\n", __func__, __clk_get_name(hw->clk), drate);
> +	pr_info("old - fbdiv: %d, postdiv1: %d, refdiv: %d, postdiv2: %d, dsmpd:
> %d, frac: %d\n", +		fbdiv, postdiv1, refdiv, postdiv2, dsmpd, frac);
> +	pr_info("new - fbdiv: %d, postdiv1: %d, refdiv: %d, postdiv2: %d, dsmpd:
> %d, frac: %d\n", +		rate->fbdiv, rate->postdiv1, rate->refdiv,
> rate->postdiv2, rate->dsmpd, rate->frac);

please don't leave pr_info calls for debug messages in the code, like in the 
rk3066 pll-type these should be pr_debug.


> +
> +	if (rate->fbdiv != fbdiv || rate->postdiv1 != postdiv1 || rate->refdiv !=
> refdiv || +		rate->postdiv2 != postdiv2 || rate->dsmpd != dsmpd ||
> rate->frac != frac) { +		struct clk *parent = __clk_get_parent(hw->clk);
> +		unsigned long prate;
> +
> +		if (!parent) {
> +			pr_warn("%s: parent of %s not available\n",
> +				__func__, __clk_get_name(hw->clk));
> +			return;
> +		}
> +
> +		pr_info("%s: pll %s: rate params do not match rate table, 
adjusting\n",
> +			 __func__, __clk_get_name(hw->clk));
> +		prate = __clk_get_rate(parent);
> +		rockchip_rk3036_pll_set_rate(hw, drate, prate);
> +	}
> +}
> +static const struct clk_ops rockchip_rk3036_pll_clk_norate_ops = {
> +	.recalc_rate = rockchip_rk3036_pll_recalc_rate,
> +	.round_rate = rockchip_pll_round_rate,
> +	.set_rate = rockchip_rk3036_pll_set_rate,
> +	.init = rockchip_rk3036_pll_init,
> +};

the ops for plls without rate table should not contain round_rate and set_rate 
callbacks, as without rate-table you of course cannot set any rate


> +
> +static const struct clk_ops rockchip_rk3036_pll_clk_ops = {
> +	.recalc_rate = rockchip_rk3036_pll_recalc_rate,
> +	.round_rate = rockchip_pll_round_rate,
> +	.set_rate = rockchip_rk3036_pll_set_rate,
> +	.init = rockchip_rk3036_pll_init,
> +};

The rk3036 pll-type also has a powerdown function it seems (xPLL_CON1[13]), so 
you can also add appropriate enable, disable and is_enabled callbacks for both 
ops structs.


>  static const struct clk_ops rockchip_rk3066_pll_clk_norate_ops = {
>  	.recalc_rate = rockchip_rk3066_pll_recalc_rate,
> @@ -385,6 +624,12 @@ struct clk *rockchip_clk_register_pll(enum
> rockchip_pll_type pll_type, else
>  			init.ops = &rockchip_rk3066_pll_clk_ops;
>  		break;
> +	case pll_rk3036:
> +		if (!pll->rate_table)
> +			init.ops = &rockchip_rk3036_pll_clk_norate_ops;
> +		else
> +			init.ops = &rockchip_rk3036_pll_clk_ops;
> +		break;
>  	default:
>  		pr_warn("%s: Unknown pll type for pll clk %s\n",
>  			__func__, name);
> @@ -408,7 +653,7 @@ struct clk *rockchip_clk_register_pll(enum
> rockchip_pll_type pll_type, pll_mux->lock = lock;
>  	pll_mux->hw.init = &init;
> 
> -	if (pll_type == pll_rk3066)
> +	if (pll_type == pll_rk3066 || pll_type == pll_rk3036)
>  		pll_mux->flags |= CLK_MUX_HIWORD_MASK;
> 
>  	pll_clk = clk_register(NULL, &pll->hw);
> diff --git a/drivers/clk/rockchip/clk-rk3036.c
> b/drivers/clk/rockchip/clk-rk3036.c new file mode 100644
> index 0000000..19cdf0e
> --- /dev/null
> +++ b/drivers/clk/rockchip/clk-rk3036.c
> @@ -0,0 +1,539 @@
> +/*
> + * Copyright (c) 2014 MundoReader S.L.
> + * Author: Heiko Stuebner <heiko at sntech.de>
> + *
> + * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
> + * Author: Xing Zheng <zhengxing at rock-chips.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/syscore_ops.h>
> +#include <dt-bindings/clock/rk3036-cru.h>
> +#include "clk.h"
> +
> +enum rk3036_plls {
> +	apll, dpll, gpll,
> +};
> +
> +static struct rockchip_pll_rate_table rk3036_pll_rates[] = {
> +	/* _mhz, _refdiv, _fbdiv, _postdiv1, _postdiv2, _dsmpd, _frac */
> +	RK3036_PLL_RATE(1608000000, 1, 67, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1584000000, 1, 66, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1560000000, 1, 65, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1536000000, 1, 64, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1512000000, 1, 63, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1488000000, 1, 62, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1464000000, 1, 61, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1440000000, 1, 60, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1416000000, 1, 59, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1392000000, 1, 58, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1368000000, 1, 57, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1344000000, 1, 56, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1320000000, 1, 55, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1296000000, 1, 54, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1272000000, 1, 53, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1248000000, 1, 52, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1200000000, 1, 50, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1188000000, 2, 99, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1104000000, 1, 46, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1100000000, 12, 550, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1008000000, 1, 84, 2, 1, 1, 0),
> +	RK3036_PLL_RATE(1000000000, 6, 500, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 984000000, 1, 82, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 960000000, 1, 80, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 936000000, 1, 78, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 912000000, 1, 76, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 900000000, 4, 300, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 888000000, 1, 74, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 864000000, 1, 72, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 840000000, 1, 70, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 816000000, 1, 68, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 800000000, 6, 400, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 700000000, 6, 350, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 696000000, 1, 58, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 600000000, 1, 75, 3, 1, 1, 0),
> +	RK3036_PLL_RATE( 594000000, 2, 99, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 504000000, 1, 63, 3, 1, 1, 0),
> +	RK3036_PLL_RATE( 500000000, 6, 250, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 408000000, 1, 68, 2, 2, 1, 0),
> +	RK3036_PLL_RATE( 312000000, 1, 52, 2, 2, 1, 0),
> +	RK3036_PLL_RATE( 216000000, 1, 72, 4, 2, 1, 0),
> +	RK3036_PLL_RATE(  96000000, 1, 64, 4, 4, 1, 0),
> +	RK3036_PLL_RATE(0, 1, 0, 1, 1, 1, 0),
> +	{ /* sentinel */ },
> +};
> +
> +#define RK3036_DIV_CPU_MASK		0x1f
> +#define RK3036_DIV_CPU_SHIFT		8
> +
> +#define RK3036_DIV_PERI_MASK		0xf
> +#define RK3036_DIV_PERI_SHIFT		0

> +#define RK3036_DIV_ACLK_MASK		0x7
> +#define RK3036_DIV_ACLK_SHIFT		4
> +#define RK3036_DIV_HCLK_MASK		0x3
> +#define RK3036_DIV_HCLK_SHIFT		8
> +#define RK3036_DIV_PCLK_MASK		0x7
> +#define RK3036_DIV_PCLK_SHIFT		12
> +
> +#define RK3036_CLKSEL1(_core_periph_div)					\
> +	{									\
> +		.reg = RK2928_CLKSEL_CON(1),					\
> +		.val = HIWORD_UPDATE(_core_periph_div, RK3036_DIV_PERI_MASK,	\
> +				RK3036_DIV_PERI_SHIFT)				\
> +	}
> +
> +#define RK3036_CPUCLK_RATE(_prate, _core_periph_div)			\
> +	{								\
> +		.prate = _prate,					\
> +		.divs = {						\
> +			RK3036_CLKSEL1(_core_periph_div),		\
> +		},							\
> +	}
> +
> +static struct rockchip_cpuclk_rate_table rk3036_cpuclk_rates[] __initdata =
> { +	RK3036_CPUCLK_RATE(816000000, 4),
> +	RK3036_CPUCLK_RATE(600000000, 4),
> +	RK3036_CPUCLK_RATE(312000000, 4),
> +};

this seems to be missing divider settings for aclk_core? I only see the core-
periph ones (for pclk_dbg) but not for aclk_core that is also sourced from the 
cpuclk?


> +
> +static const struct rockchip_cpuclk_reg_data rk3036_cpuclk_data = {
> +	.core_reg = RK2928_CLKSEL_CON(0),
> +	.div_core_shift = 0,
> +	.div_core_mask = 0x1f,
> +	.mux_core_shift = 7,
> +};
> +
> +PNAME(mux_pll_p)		= { "xin24m", "xin24m" };
> +
> +PNAME(mux_armclk_p)		= { "apll", "gpll_armclk" };
> +PNAME(mux_busclk_p)		= { "apll", "dpll_cpu", "gpll_cpu" };
> +PNAME(mux_ddrphy_p)		= { "dpll_ddr", "gpll_ddr" };
> +PNAME(mux_pll_src_3plls_p)	= { "apll", "dpll", "gpll" };
> +PNAME(mux_timer_p)		= { "xin24m", "pclk_peri_src" };
> +
> +PNAME(mux_pll_src_apll_gpll_dpll_usb480m_p)	= { "apll", "gpll", "dpll"
> "usb480m" }; +
> +PNAME(mux_mmc_src_p)	= { "apll", "gpll", "dpll", "xin24m" };
> +PNAME(mux_i2s_pre_p)	= { "i2s_src", "i2s_frac", "ext_i2s", "xin12m" };
> +PNAME(mux_i2s_clkout_p)	= { "i2s_pre", "xin12m" };
> +PNAME(mux_spdif_p)	= { "spdif_src", "spdif_frac", "xin12m" };
> +PNAME(mux_uart0_p)	= { "uart0_src", "uart0_frac", "xin24m" };
> +PNAME(mux_uart1_p)	= { "uart1_src", "uart1_frac", "xin24m" };
> +PNAME(mux_uart2_p)	= { "uart2_src", "uart2_frac", "xin24m" };
> +PNAME(mux_mac_p)	= { "mac_pll_src", "ext_gmac" };
> +PNAME(mux_dclk_p)	= { "dclk_lcdc", "dclk_hdmi_src" };
> +
> +static struct rockchip_pll_clock rk3036_pll_clks[] __initdata = {
> +	[apll] = PLL(pll_rk3036, PLL_APLL, "apll", mux_pll_p, 0,
> RK2928_PLL_CON(0), +		     RK2928_MODE_CON, 0, 10, 0, rk3036_pll_rates),
> +	[dpll] = PLL(pll_rk3036, PLL_DPLL, "dpll", mux_pll_p, 0,
> RK2928_PLL_CON(4), +		     RK2928_MODE_CON, 4, 10, 0, NULL),
> +	[gpll] = PLL(pll_rk3036, PLL_GPLL, "gpll", mux_pll_p, 0,
> RK2928_PLL_CON(12), +		     RK2928_MODE_CON, 12, 10,
> ROCKCHIP_PLL_SYNC_RATE, rk3036_pll_rates), +};
> +
> +#define MFLAGS CLK_MUX_HIWORD_MASK
> +#define DFLAGS CLK_DIVIDER_HIWORD_MASK
> +#define GFLAGS (CLK_GATE_HIWORD_MASK | CLK_GATE_SET_TO_DISABLE)
> +
> +static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
> +	/*
> +	 * Clock-Architecture Diagram 1
> +	 */
> +
> +	/* PD_CORE */
> +	GATE(0, "gpll_armclk", "gpll", CLK_IGNORE_UNUSED,
> +			RK2928_CLKGATE_CON(0), 6, GFLAGS),
> +
> +	/* PD_DDR */
> +	GATE(0, "dpll_ddr", "dpll", CLK_IGNORE_UNUSED,
> +			RK2928_CLKGATE_CON(0), 2, GFLAGS),
> +	GATE(0, "gpll_ddr", "gpll", 0,
> +			RK2928_CLKGATE_CON(0), 8, GFLAGS),
> +	COMPOSITE_NOGATE(0, "ddrphy2x", mux_ddrphy_p, CLK_IGNORE_UNUSED,
> +			RK2928_CLKSEL_CON(26), 8, 1, MFLAGS, 0, 2,
> +					DFLAGS | CLK_DIVIDER_POWER_OF_TWO),

please keep the formatting. With the big number of clock definitions, reading 
is easier if everything stays in one place without additional line-breaks.
So please move the "DFLAGS | ..." part up into the previous line. (same if 
this occures somewhere lese)


> +
> +	/* PD_CORE */
> +	COMPOSITE_NOMUX(0, "pclk_dbg", "armclk", CLK_IGNORE_UNUSED,
> +			RK2928_CLKSEL_CON(1), 0, 4, DFLAGS | CLK_DIVIDER_READ_ONLY,
> +			RK2928_CLKGATE_CON(0), 7, GFLAGS),
> +	COMPOSITE_NOMUX(0, "aclk_core_pre", "armclk", 0,
> +			RK2928_CLKSEL_CON(1), 4, 3, DFLAGS | CLK_DIVIDER_READ_ONLY,
> +			RK2928_CLKGATE_CON(0), 7, GFLAGS),
> +
> +	/* PD_CPU (BUS) */
> +	GATE(0, "dpll_cpu", "dpll", 0, RK2928_CLKGATE_CON(10), 8, GFLAGS),
> +	GATE(0, "gpll_cpu", "gpll", 0, RK2928_CLKGATE_CON(0), 1, GFLAGS),
> +	COMPOSITE_NOGATE(0, "aclk_cpu_src", mux_busclk_p, 0,
> +			RK2928_CLKSEL_CON(0), 14, 2, MFLAGS, 8, 5, DFLAGS),
> +	GATE(ACLK_CPU, "aclk_cpu", "aclk_cpu_src", 0, RK2928_CLKGATE_CON(0), 3,
> GFLAGS), +	COMPOSITE_NOMUX(PCLK_CPU, "pclk_cpu", "aclk_cpu_src", 0,
> +			RK2928_CLKSEL_CON(1), 12, 3, DFLAGS | CLK_DIVIDER_READ_ONLY,
> +			RK2928_CLKGATE_CON(0), 5, GFLAGS),
> +	COMPOSITE_NOMUX(HCLK_CPU, "hclk_cpu", "aclk_cpu_src", 0,
> +			RK2928_CLKSEL_CON(1), 8, 2, DFLAGS | CLK_DIVIDER_READ_ONLY,
> +			RK2928_CLKGATE_CON(0), 4, GFLAGS),
> +
> +	/* PD_PERI */
> +	COMPOSITE(0, "aclk_peri_src", mux_pll_src_3plls_p, 0,
> +			RK2928_CLKSEL_CON(10), 14, 2, MFLAGS, 0, 5, DFLAGS,
> +			RK2928_CLKGATE_CON(2), 0, GFLAGS),
> +
> +	GATE(ACLK_PERI, "aclk_peri", "aclk_peri_src", 0,
> +			RK2928_CLKGATE_CON(2), 1, GFLAGS),
> +	/* pclk_peri_src is soure for timers */
> +	DIV(0, "pclk_peri_src", "aclk_peri_src", CLK_IGNORE_UNUSED,
> +			RK2928_CLKSEL_CON(10), 12, 2, DFLAGS | 
CLK_DIVIDER_POWER_OF_TWO),
> +	GATE(PCLK_PERI, "pclk_peri", "pclk_peri_src", 0,
> +			RK2928_CLKGATE_CON(2), 3, GFLAGS),
> +	/* hclk_peri_src is soure for sclk_macref_out */
> +	DIV(0, "hclk_peri_src", "aclk_peri_src", CLK_IGNORE_UNUSED,
> +			RK2928_CLKSEL_CON(10), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO),
> +	GATE(HCLK_PERI, "hclk_peri", "hclk_peri_src", 0,
> +			RK2928_CLKGATE_CON(2), 2, GFLAGS),
> +
> +	/* PD_TIMER */
> +	COMPOSITE_NODIV(SCLK_TIMER0, "sclk_timer0", mux_timer_p, 0,
> +			RK2928_CLKSEL_CON(2), 4, 1, DFLAGS,
> +			RK2928_CLKGATE_CON(1), 0, GFLAGS),
> +	COMPOSITE_NODIV(SCLK_TIMER1, "sclk_timer1", mux_timer_p, 0,
> +			RK2928_CLKSEL_CON(2), 5, 1, DFLAGS,
> +			RK2928_CLKGATE_CON(1), 1, GFLAGS),
> +	COMPOSITE_NODIV(SCLK_TIMER2, "sclk_timer2", mux_timer_p, 0,
> +			RK2928_CLKSEL_CON(2), 6, 1, DFLAGS,
> +			RK2928_CLKGATE_CON(2), 4, GFLAGS),
> +	COMPOSITE_NODIV(SCLK_TIMER3, "sclk_timer3", mux_timer_p, 0,
> +			RK2928_CLKSEL_CON(2), 7, 1, DFLAGS,
> +			RK2928_CLKGATE_CON(2), 5, GFLAGS),
> +
> +	/* PD_UART */
> +	MUX(0, "uart_pll_clk", mux_pll_src_apll_gpll_dpll_usb480m_p, 0,
> +			RK2928_CLKSEL_CON(13), 10, 2, MFLAGS),
> +	COMPOSITE_NOMUX(0, "uart0_src", "uart_pll_clk", 0,
> +			RK2928_CLKSEL_CON(13), 0, 7, DFLAGS,
> +			RK2928_CLKGATE_CON(1), 8, GFLAGS),
> +	COMPOSITE_NOMUX(0, "uart1_src", "uart_pll_clk", 0,
> +			RK2928_CLKSEL_CON(13), 0, 7, DFLAGS,
> +			RK2928_CLKGATE_CON(1), 8, GFLAGS),
> +	COMPOSITE_NOMUX(0, "uart2_src", "uart_pll_clk", 0,
> +			RK2928_CLKSEL_CON(13), 0, 7, DFLAGS,
> +			RK2928_CLKGATE_CON(1), 8, GFLAGS),
> +	COMPOSITE_FRAC(0, "uart0_frac", "uart0_src", CLK_SET_RATE_PARENT,
> +			RK2928_CLKSEL_CON(17), 0,
> +			RK2928_CLKGATE_CON(1), 9, GFLAGS),
> +	COMPOSITE_FRAC(0, "uart1_frac", "uart1_src", CLK_SET_RATE_PARENT,
> +			RK2928_CLKSEL_CON(18), 0,
> +			RK2928_CLKGATE_CON(1), 11, GFLAGS),
> +	COMPOSITE_FRAC(0, "uart2_frac", "uart2_src", CLK_SET_RATE_PARENT,
> +			RK2928_CLKSEL_CON(19), 0,
> +			RK2928_CLKGATE_CON(1), 13, GFLAGS),
> +	MUX(SCLK_UART0, "sclk_uart0", mux_uart0_p, CLK_SET_RATE_PARENT,
> +			RK2928_CLKSEL_CON(13), 8, 2, MFLAGS),
> +	MUX(SCLK_UART1, "sclk_uart1", mux_uart1_p, CLK_SET_RATE_PARENT,
> +			RK2928_CLKSEL_CON(14), 8, 2, MFLAGS),
> +	MUX(SCLK_UART2, "sclk_uart2", mux_uart2_p, CLK_SET_RATE_PARENT,
> +			RK2928_CLKSEL_CON(15), 8, 2, MFLAGS),
> +
> +	/* PD_VIDEO */
> +	COMPOSITE(0, "aclk_vcodec", mux_pll_src_3plls_p, 0,
> +			RK2928_CLKSEL_CON(32), 14, 2, MFLAGS, 8, 5, DFLAGS,
> +			RK2928_CLKGATE_CON(3), 11, GFLAGS),
> +
> +	COMPOSITE(0, "aclk_hvec", mux_pll_src_3plls_p, 0,
> +			RK2928_CLKSEL_CON(20), 0, 2, MFLAGS, 2, 5, DFLAGS,
> +			RK2928_CLKGATE_CON(10), 6, GFLAGS),
> +
> +	/* PD_VIO */
> +	COMPOSITE(0, "aclk_disp1_pre", mux_pll_src_3plls_p, 0,
> +			RK2928_CLKSEL_CON(31), 14, 2, MFLAGS, 8, 5, DFLAGS,
> +			RK2928_CLKGATE_CON(1), 4, GFLAGS),
> +	COMPOSITE(0, "hclk_disp_pre", mux_pll_src_3plls_p, 0,
> +			RK2928_CLKSEL_CON(30), 14, 2, MFLAGS, 8, 5, DFLAGS,
> +			RK2928_CLKGATE_CON(0), 11, GFLAGS),
> +	COMPOSITE(DCLK_LCDC, "dclk_lcdc", mux_pll_src_3plls_p, 0,
> +			RK2928_CLKSEL_CON(28), 0, 2, MFLAGS, 8, 8, DFLAGS,
> +			RK2928_CLKGATE_CON(3), 2, GFLAGS),
> +
> +	/* MMC */
> +	COMPOSITE_NODIV(0, "sclk_sdmmc_src", mux_mmc_src_p, 0,
> +			RK2928_CLKSEL_CON(12), 8, 2, DFLAGS,
> +			RK2928_CLKGATE_CON(2), 11, GFLAGS),
> +	DIV(SCLK_SDMMC, "sclk_sdmmc", "sclk_sdmmc_src", 0,
> +			RK2928_CLKSEL_CON(11), 0, 7, DFLAGS),
> +
> +	COMPOSITE_NODIV(0, "sclk_sdio_src", mux_mmc_src_p, 0,
> +			RK2928_CLKSEL_CON(12), 10, 2, DFLAGS,
> +			RK2928_CLKGATE_CON(2), 13, GFLAGS),
> +	DIV(SCLK_SDIO, "sclk_sdio", "sclk_sdio_src", 0,
> +			RK2928_CLKSEL_CON(11), 8, 7, DFLAGS),
> +
> +	COMPOSITE(SCLK_EMMC, "sclk_emmc", mux_mmc_src_p, 0,
> +			RK2928_CLKSEL_CON(12), 12, 2, MFLAGS, 0, 7, DFLAGS,
> +			RK2928_CLKGATE_CON(2), 14, GFLAGS),
> +
> +	MMC(SCLK_SDMMC_DRV,    "sdmmc_drv",    "sclk_sdmmc", RK3036_SDMMC_CON0,
> 1), +	MMC(SCLK_SDMMC_SAMPLE, "sdmmc_sample", "sclk_sdmmc",
> RK3036_SDMMC_CON1, 0), +
> +	MMC(SCLK_SDIO_DRV,    "sdio_drv",    "sclk_sdio", RK3036_SDIO_CON0, 1),
> +	MMC(SCLK_SDIO_SAMPLE, "sdio_sample", "sclk_sdio", RK3036_SDIO_CON1, 0),
> +
> +	MMC(SCLK_EMMC_DRV,     "emmc_drv",     "sclk_emmc",  RK3036_EMMC_CON0, 
> 1), +	MMC(SCLK_EMMC_SAMPLE,  "emmc_sample",  "sclk_emmc", 
> RK3036_EMMC_CON1,  0), +
> +	/* I2S */
> +	COMPOSITE(0, "i2s_src", mux_pll_src_3plls_p, 0,
> +			RK2928_CLKSEL_CON(3), 14, 1, MFLAGS, 0, 7, DFLAGS,
> +			RK2928_CLKGATE_CON(0), 9, GFLAGS),
> +	COMPOSITE_FRAC(0, "i2s_frac", "i2s_src", CLK_SET_RATE_PARENT,
> +			RK2928_CLKSEL_CON(7), 0,
> +			RK2928_CLKGATE_CON(0), 10, GFLAGS),
> +	MUX(0, "i2s_pre", mux_i2s_pre_p, CLK_SET_RATE_PARENT,
> +			RK2928_CLKSEL_CON(3), 8, 2, MFLAGS),
> +	COMPOSITE_NODIV(SCLK_I2S_OUT, "i2s_clkout", mux_i2s_clkout_p, 0,
> +			RK2928_CLKSEL_CON(4), 12, 1, MFLAGS,
> +			RK2928_CLKGATE_CON(0), 13, GFLAGS),
> +	GATE(SCLK_I2S, "sclk_i2s", "i2s_pre", CLK_SET_RATE_PARENT,
> +			RK2928_CLKGATE_CON(0), 14, GFLAGS),
> +
> +	COMPOSITE(0, "spdif_src", mux_pll_src_3plls_p, 0,
> +			RK2928_CLKSEL_CON(5), 10, 2, MFLAGS, 0, 7, DFLAGS,
> +			RK2928_CLKGATE_CON(2), 10, GFLAGS),
> +	COMPOSITE_FRAC(0, "spdif_frac", "spdif_src", 0,
> +			RK2928_CLKSEL_CON(9), 0,
> +			RK2928_CLKGATE_CON(2), 12, GFLAGS),
> +	MUX(SCLK_SPDIF, "sclk_spdif", mux_spdif_p, 0,
> +			RK2928_CLKSEL_CON(5), 8, 2, MFLAGS),
> +	/* USB */
> +	GATE(0, "hsicphy12m_xin12m", "xin12m", 0,
> +			RK2928_CLKGATE_CON(1), 5, GFLAGS),
> +
> +	/* GPU */

some of these comments are redundant ... if the clock is already named 
sclk_gpu a comment GPU above does not help any :-)

Same for SPI, NANDC and everything else you might find.


> +	COMPOSITE(SCLK_GPU, "sclk_gpu", mux_pll_src_3plls_p, 0,
> +			RK2928_CLKSEL_CON(34), 8, 2, MFLAGS, 0, 5, DFLAGS,
> +			RK2928_CLKGATE_CON(3), 13, GFLAGS),
> +
> +	/* SPI */
> +	COMPOSITE(SCLK_SPI, "sclk_spi", mux_pll_src_3plls_p, 0,
> +			RK2928_CLKSEL_CON(25), 8, 2, MFLAGS, 0, 7, DFLAGS,
> +			RK2928_CLKGATE_CON(2), 9, GFLAGS),
> +
> +	/* NANDC */
> +	COMPOSITE(SCLK_NANDC, "sclk_nandc", mux_pll_src_3plls_p, 0,
> +			RK2928_CLKSEL_CON(16), 8, 2, MFLAGS, 10, 5, DFLAGS,
> +			RK2928_CLKGATE_CON(10), 4, GFLAGS),
> +
> +	/* SFC */
> +	COMPOSITE(SCLK_SFC, "sclk_sfc", mux_pll_src_apll_gpll_dpll_usb480m_p, 0,
> +			RK2928_CLKSEL_CON(16), 0, 2, MFLAGS, 2, 5, DFLAGS,
> +			RK2928_CLKGATE_CON(10), 5, GFLAGS),
> +
> +	/* MAC */
> +	COMPOSITE_NOGATE(0, "mac_pll_src", mux_pll_src_3plls_p, 0,
> +			RK2928_CLKSEL_CON(21), 0, 2, MFLAGS, 4, 5, DFLAGS),
> +	/* for clk_mac_ref & clk_mac_refout */
> +	MUX(SCLK_MACREF, "mac_clk_ref", mux_mac_p, CLK_SET_RATE_PARENT,
> +			RK2928_CLKSEL_CON(21), 3, 1, MFLAGS),
> +
> +	COMPOSITE_NOMUX(SCLK_MAC, "mac_clk", "mac_clk_ref", 0,
> +			RK2928_CLKSEL_CON(21), 9, 5, DFLAGS,
> +			RK2928_CLKGATE_CON(2), 6, GFLAGS),
> +

The hdmi diagram is actually labeled "Clock Architecture Diagram 2"

> +	/* HDMI */
> +	/* total clks: pin_sys_clk / pin_sck / pin_mclk / pin_vclk /
> pin_vclk_pllref */ +	/* the same with dclk_lcdc */
> +	COMPOSITE(0, "dclk_hdmi_src", mux_pll_src_3plls_p, 0,
> +			RK2928_CLKSEL_CON(28), 0, 2, MFLAGS, 8, 8, DFLAGS,
> +			RK2928_CLKGATE_CON(3), 2, GFLAGS),
> +	/* hdmi dclk from dclk_lcdc directly */
> +	MUX(SCLK_HDMI, "dclk_hdmi", mux_dclk_p, 0,
> +			RK2928_CLKSEL_CON(31), 0, 1, MFLAGS),
> +
> +	/*
> +	 * Clock-Architecture Diagram 2

The gates are in Diagram 3 in the RK3036 TRM I have


> +	 */
> +
> +	/* aclk_cpu gates */
> +	GATE(0, "sclk_intmem", "aclk_cpu", CLK_IGNORE_UNUSED,
> RK2928_CLKGATE_CON(4), 12, GFLAGS), +	GATE(0, "aclk_strc_sys", "aclk_cpu",
> CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 10, GFLAGS), +
> +	/* hclk_cpu gates */
> +	GATE(HCLK_ROM, "hclk_rom", "hclk_cpu", CLK_IGNORE_UNUSED,
> RK2928_CLKGATE_CON(5), 6, GFLAGS), +
> +	/* pclk_cpu gates */
> +	GATE(PCLK_GRF, "pclk_grf", "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 4,
> GFLAGS), +	GATE(PCLK_DDRUPCTL, "pclk_ddrupctl", "pclk_cpu", 0,
> RK2928_CLKGATE_CON(5), 7, GFLAGS), +	GATE(ACLK_VCODEC, "pclk_acodec",
> "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 14, GFLAGS), +	GATE(PCLK_HDMI,
> "pclk_hdmi", "pclk_cpu", 0, RK2928_CLKGATE_CON(3), 8, GFLAGS), +
> +	/* aclk_vio gates */
> +	GATE(ACLK_VIO, "aclk_vio", "aclk_disp1_pre", 0,
> +			RK2928_CLKGATE_CON(6), 13, GFLAGS),
> +	GATE(ACLK_LCDC, "aclk_lcdc", "aclk_disp1_pre", 0,
> +			RK2928_CLKGATE_CON(9), 6, GFLAGS),
> +
> +	GATE(HCLK_VIO_BUS, "hclk_vio_bus", "hclk_disp_pre", 0,
> +			RK2928_CLKGATE_CON(6), 12, GFLAGS),
> +	GATE(HCLK_LCDC, "hclk_lcdc", "hclk_disp_pre", 0,
> +			RK2928_CLKGATE_CON(9), 5, GFLAGS),
> +
> +	/* aclk_video gates */
> +	GATE(HCLK_LCDC, "hclk_vcodec", "hclk_disp_pre", 0,
> +			RK2928_CLKGATE_CON(3), 12, GFLAGS),
> +
> +	/* xin24m gates */
> +	GATE(SCLK_PVTM_CORE, "sclk_pvtm_core", "xin24m", 0,
> RK2928_CLKGATE_CON(10), 0, GFLAGS), +	GATE(SCLK_PVTM_GPU, "sclk_pvtm_gpu",
> "xin24m", 0, RK2928_CLKGATE_CON(10), 1, GFLAGS), +
> +	/* aclk_peri gates */
> +	GATE(0, "aclk_peri_axi_matrix", "aclk_peri", CLK_IGNORE_UNUSED,
> RK2928_CLKGATE_CON(4), 3, GFLAGS), +	GATE(0, "aclk_cpu_peri", "aclk_peri",
> CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 2, GFLAGS), +	GATE(ACLK_DMAC2,
> "aclk_dmac2", "aclk_peri", 0, RK2928_CLKGATE_CON(5), 1, GFLAGS), +	GATE(0,
> "aclk_peri_niu", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 15,
> GFLAGS), +
> +	/* hclk_peri gates */
> +	GATE(0, "hclk_peri_matrix", "hclk_peri", CLK_IGNORE_UNUSED,
> RK2928_CLKGATE_CON(4), 0, GFLAGS), +	GATE(0, "hclk_usb_peri", "hclk_peri",
> CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 13, GFLAGS), +	GATE(0,
> "hclk_peri_arbi", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9),
> 14, GFLAGS), +	GATE(HCLK_NANDC, "hclk_nandc", "hclk_peri", 0,
> RK2928_CLKGATE_CON(5), 9, GFLAGS), +	GATE(HCLK_SDMMC, "hclk_sdmmc",
> "hclk_peri", 0, RK2928_CLKGATE_CON(5), 10, GFLAGS), +	GATE(HCLK_SDIO,
> "hclk_sdio", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 11, GFLAGS),
> +	GATE(HCLK_EMMC, "hclk_emmc", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 0,
> GFLAGS), +	GATE(HCLK_OTG0, "hclk_otg0", "hclk_peri", CLK_IGNORE_UNUSED,
> RK2928_CLKGATE_CON(5), 13, GFLAGS), +	GATE(HCLK_OTG1, "hclk_otg1",
> "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(7), 13, GFLAGS),
> +	GATE(HCLK_I2S, "hclk_i2s", "hclk_peri", CLK_IGNORE_UNUSED,
> RK2928_CLKGATE_CON(7), 2, GFLAGS), +	GATE(0, "hclk_sfc", "hclk_peri",
> CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 14, GFLAGS), +	GATE(0,
> "hclk_mac", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 15,
> GFLAGS), +
> +	/* pclk_peri gates */
> +	GATE(0, "pclk_peri_matrix", "pclk_peri", CLK_IGNORE_UNUSED,
> RK2928_CLKGATE_CON(4), 1, GFLAGS), +	GATE(0, "pclk_efuse", "pclk_peri",
> CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 2, GFLAGS), +	GATE(PCLK_TIMER,
> "pclk_timer0", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 7, GFLAGS),
> +	GATE(PCLK_PWM, "pclk_pwm", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 10,
> GFLAGS), +	GATE(PCLK_SPI, "pclk_spi", "pclk_peri", 0,
> RK2928_CLKGATE_CON(7), 12, GFLAGS), +	GATE(PCLK_WDT, "pclk_wdt",
> "pclk_peri", 0, RK2928_CLKGATE_CON(7), 15, GFLAGS), +	GATE(PCLK_UART0,
> "pclk_uart0", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 0, GFLAGS),
> +	GATE(PCLK_UART1, "pclk_uart1", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 1,
> GFLAGS), +	GATE(PCLK_UART2, "pclk_uart2", "pclk_peri", 0,
> RK2928_CLKGATE_CON(8), 2, GFLAGS), +	GATE(PCLK_I2C0, "pclk_i2c0",
> "pclk_peri", 0, RK2928_CLKGATE_CON(8), 4, GFLAGS), +	GATE(PCLK_I2C1,
> "pclk_i2c1", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 5, GFLAGS),
> +	GATE(PCLK_I2C2, "pclk_i2c2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 6,
> GFLAGS), +	GATE(PCLK_GPIO0, "pclk_gpio0", "pclk_peri", 0,
> RK2928_CLKGATE_CON(8), 9, GFLAGS), +	GATE(PCLK_GPIO1, "pclk_gpio1",
> "pclk_peri", 0, RK2928_CLKGATE_CON(8), 10, GFLAGS), +	GATE(PCLK_GPIO2,
> "pclk_gpio2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 11, GFLAGS), +};
> +
> +static const char *const rk3036_critical_clocks[] __initconst = {
> +	"aclk_cpu",
> +	"aclk_peri",
> +	"hclk_peri",
> +};
> +
> +#ifdef CONFIG_PM_SLEEP
> +static void __iomem *rk3036_cru_base;
> +
> +/* Some CRU registers will be reset in maskrom when the system
> + * wakes up from fastboot.
> + * So save them before suspend, restore them after resume.
> + */
> +
> +static int rk3036_clk_suspend(void)
> +{
> +	/* TODO */
> +
> +	return 0;
> +}
> +
> +static void rk3036_clk_resume(void)
> +{
> +	/* TODO */
> +}
> +
> +static struct syscore_ops rk3036_clk_syscore_ops = {
> +	.suspend = rk3036_clk_suspend,
> +	.resume = rk3036_clk_resume,
> +};
> +
> +static void rk3036_clk_sleep_init(void __iomem *reg_base)
> +{
> +	rk3036_cru_base = reg_base;
> +	register_syscore_ops(&rk3036_clk_syscore_ops);
> +}
> +
> +#else /* CONFIG_PM_SLEEP */
> +static void rk3036_clk_sleep_init(void __iomem *reg_base) {}
> +#endif

please don't add empty "TODO" functions. If you want to work on suspend later, 
just leave this stuff out completely and add it when time comes.


> +
> +static void __init rk3036_clk_init(struct device_node *np)
> +{
> +	void __iomem *reg_base;
> +	struct clk *clk;
> +
> +	reg_base = of_iomap(np, 0);
> +	if (!reg_base) {
> +		pr_err("%s: could not map cru region\n", __func__);
> +		return;
> +	}
> +
> +	rockchip_clk_init(np, reg_base, CLK_NR_CLKS);
> +
> +	/* xin12m is created by an cru-internal divider */
> +	clk = clk_register_fixed_factor(NULL, "xin12m", "xin24m", 0, 1, 2);
> +	if (IS_ERR(clk))
> +		pr_warn("%s: could not register clock xin12m: %ld\n",
> +			__func__, PTR_ERR(clk));
> +
> +	clk = clk_register_fixed_factor(NULL, "usb480m", "xin24m", 0, 20, 1);
> +	if (IS_ERR(clk))
> +		pr_warn("%s: could not register clock usb480m: %ld\n",
> +			__func__, PTR_ERR(clk));
> +
> +	clk = clk_register_fixed_factor(NULL, "ddrphy", "ddrphy2x", 0, 1, 2);
> +	if (IS_ERR(clk))
> +		pr_warn("%s: could not register clock ddrphy: %ld\n",
> +			__func__, PTR_ERR(clk));
> +
> +	clk = clk_register_fixed_factor(NULL, "hclk_vcodec_pre",
> +					"aclk_vcodec", 0, 1, 4);
> +	if (IS_ERR(clk))
> +		pr_warn("%s: could not register clock hclk_vcodec_pre: %ld\n",
> +			__func__, PTR_ERR(clk));
> +
> +	clk = clk_register_fixed_factor(NULL, "sclk_macref_out",
> +					"hclk_peri_src", 0, 1, 2);
> +	if (IS_ERR(clk))
> +		pr_warn("%s: could not register clock sclk_macref_out: %ld\n",
> +			__func__, PTR_ERR(clk));
> +
> +	rockchip_clk_register_plls(rk3036_pll_clks,
> +				   ARRAY_SIZE(rk3036_pll_clks),
> +				   -1);
> +	rockchip_clk_register_branches(rk3036_clk_branches,
> +				  ARRAY_SIZE(rk3036_clk_branches));
> +	rockchip_clk_protect_critical(rk3036_critical_clocks,
> +				      ARRAY_SIZE(rk3036_critical_clocks));
> +
> +	rockchip_clk_register_armclk(ARMCLK, "armclk",
> +			mux_armclk_p, ARRAY_SIZE(mux_armclk_p),
> +			&rk3036_cpuclk_data, rk3036_cpuclk_rates,
> +			ARRAY_SIZE(rk3036_cpuclk_rates));
> +
> +	rockchip_register_softrst(np, 9, reg_base + RK2928_SOFTRST_CON(0),
> +				  ROCKCHIP_SOFTRST_HIWORD_MASK);
> +
> +	rockchip_register_restart_notifier(RK2928_GLB_SRST_FST);
> +	rk3036_clk_sleep_init(reg_base);
> +}
> +CLK_OF_DECLARE(rk3036_cru, "rockchip,rk3036-cru", rk3036_clk_init);
> diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h
> index dc8ecb2..6603c07 100644
> --- a/drivers/clk/rockchip/clk.h
> +++ b/drivers/clk/rockchip/clk.h
> @@ -2,6 +2,9 @@
>   * Copyright (c) 2014 MundoReader S.L.
>   * Author: Heiko Stuebner <heiko at sntech.de>
>   *
> + * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
> + * Author: Xing Zheng <zhengxing at rock-chips.com>
> + *
>   * based on
>   *
>   * samsung/clk.h
> @@ -40,6 +43,13 @@ struct clk;
>  #define RK2928_SOFTRST_CON(x)	((x) * 0x4 + 0x110)
>  #define RK2928_MISC_CON		0x134
> 
> +#define RK3036_SDMMC_CON0		0x144
> +#define RK3036_SDMMC_CON1		0x148
> +#define RK3036_SDIO_CON0		0x14c
> +#define RK3036_SDIO_CON1		0x150
> +#define RK3036_EMMC_CON0		0x154
> +#define RK3036_EMMC_CON1		0x158
> +
>  #define RK3288_PLL_CON(x)		RK2928_PLL_CON(x)
>  #define RK3288_MODE_CON			0x50
>  #define RK3288_CLKSEL_CON(x)		((x) * 0x4 + 0x60)
> @@ -75,6 +85,7 @@ struct clk;
> 
>  enum rockchip_pll_type {
>  	pll_rk3066,
> +	pll_rk3036,
>  };
> 
>  #define RK3066_PLL_RATE(_rate, _nr, _nf, _no)	\
> @@ -95,12 +106,31 @@ enum rockchip_pll_type {
>  	.nb = _nb,						\
>  }
> 
> +#define RK3036_PLL_RATE(_rate, _refdiv, _fbdiv, _postdiv1,	\
> +			_postdiv2, _dsmpd, _frac)		\
> +{								\
> +	.rate	= _rate##U,					\
> +	.fbdiv = _fbdiv,					\
> +	.postdiv1 = _postdiv1,					\
> +	.refdiv = _refdiv,					\
> +	.postdiv2 = _postdiv2,					\
> +	.dsmpd = _dsmpd,					\
> +	.frac = _frac,						\
> +}
> +
>  struct rockchip_pll_rate_table {
>  	unsigned long rate;
>  	unsigned int nr;
>  	unsigned int nf;
>  	unsigned int no;
>  	unsigned int nb;
> +	/* for RK3036 */
> +	unsigned int fbdiv;
> +	unsigned int postdiv1;
> +	unsigned int refdiv;
> +	unsigned int postdiv2;
> +	unsigned int dsmpd;
> +	unsigned int frac;
>  };
> 
>  /**
> diff --git a/include/dt-bindings/clock/rk3036-cru.h
> b/include/dt-bindings/clock/rk3036-cru.h new file mode 100644
> index 0000000..085e4c3
> --- /dev/null
> +++ b/include/dt-bindings/clock/rk3036-cru.h
> @@ -0,0 +1,247 @@
> +/*
> + * Copyright (c) 2014 MundoReader S.L.
> + * Author: Heiko Stuebner <heiko at sntech.de>
> + *
> + * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
> + * Author: Xing Zheng <zhengxing at rock-chips.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +/* core clocks */
> +#define PLL_APLL		1
> +#define PLL_DPLL		2
> +#define PLL_GPLL		3
> +#define ARMCLK			4
> +
> +/* sclk gates (special clocks) */
> +#define SCLK_GPU		64
> +#define SCLK_SPI		65
> +#define SCLK_SDMMC		68
> +#define SCLK_SDIO		69
> +#define SCLK_EMMC		71
> +#define SCLK_NANDC		76
> +#define SCLK_UART0		77
> +#define SCLK_UART1		78
> +#define SCLK_UART2		79
> +#define SCLK_I2S		82
> +#define SCLK_SPDIF		83
> +#define SCLK_TIMER0		85
> +#define SCLK_TIMER1		86
> +#define SCLK_TIMER2		87
> +#define SCLK_TIMER3		88
> +#define SCLK_OTGPHY0		93
> +#define SCLK_OTGPHY1		94
> +#define SCLK_LCDC		100
> +#define SCLK_HDMI		109
> +#define SCLK_HEVC		111
> +#define SCLK_I2S_OUT		113
> +#define SCLK_SDMMC_DRV		114
> +#define SCLK_SDIO_DRV		115
> +#define SCLK_EMMC_DRV		117
> +#define SCLK_SDMMC_SAMPLE	118
> +#define SCLK_SDIO_SAMPLE	119
> +#define SCLK_EMMC_SAMPLE	121
> +#define SCLK_PVTM_CORE          123
> +#define SCLK_PVTM_GPU           124
> +#define SCLK_PVTM_VIDEO         125
> +#define SCLK_MAC		151
> +#define SCLK_MACREF		152
> +#define SCLK_SFC		160
> +
> +#define DCLK_LCDC		190
> +
> +/* aclk gates */
> +#define ACLK_DMAC2		194
> +#define ACLK_LCDC		197
> +#define ACLK_VIO		203
> +#define ACLK_VCODEC		208
> +#define ACLK_CPU		209
> +#define ACLK_PERI		210
> +
> +/* pclk gates */
> +#define PCLK_GPIO0		320
> +#define PCLK_GPIO1		321
> +#define PCLK_GPIO2		322
> +#define PCLK_GRF		329
> +#define PCLK_I2C0		332
> +#define PCLK_I2C1		333
> +#define PCLK_I2C2		334
> +#define PCLK_SPI		338
> +#define PCLK_UART0		341
> +#define PCLK_UART1		342
> +#define PCLK_UART2		343
> +#define PCLK_PWM		350
> +#define PCLK_TIMER		353
> +#define PCLK_HDMI		360
> +#define PCLK_CPU		362
> +#define PCLK_PERI		363
> +#define PCLK_DDRUPCTL		364
> +#define PCLK_WDT		368
> +
> +/* hclk gates */
> +#define HCLK_OTG0		449
> +#define HCLK_OTG1		450
> +#define HCLK_NANDC		453
> +#define HCLK_SDMMC		456
> +#define HCLK_SDIO		457
> +#define HCLK_EMMC		459
> +#define HCLK_I2S		462
> +#define HCLK_LCDC		465
> +#define HCLK_ROM		467
> +#define HCLK_VIO_BUS		472
> +#define HCLK_VCODEC		476
> +#define HCLK_CPU		477
> +#define HCLK_PERI		478
> +
> +#define CLK_NR_CLKS		(HCLK_PERI + 1)
> +
> +/* soft-reset indices */
> +#define SRST_CORE0		0
> +#define SRST_CORE1		1
> +#define SRST_0RES2		2
> +#define SRST_0RES3		3
> +#define SRST_CORE0_DBG		4
> +#define SRST_CORE1_DBG		5
> +#define SRST_0RES6		6
> +#define SRST_0RES7		7
> +#define SRST_CORE0_POR		8
> +#define SRST_CORE1_POR		9
> +#define SRST_0RES10		10
> +#define SRST_0RES11		11
> +#define SRST_L2C		12
> +#define SRST_TOPDBG		13
> +#define SRST_STRC_SYS_A		14
> +#define SRST_PD_CORE_NIU	15
> +
> +#define SRST_TIMER2		16
> +#define SRST_CPUSYS_H		17
> +#define SRST_1RES2		18
> +#define SRST_AHB2APB_H		19
> +#define SRST_TIMER3		20
> +#define SRST_INTMEM		21
> +#define SRST_ROM		22
> +#define SRST_PERI_NIU		23
> +#define SRST_I2S		24
> +#define SRST_DDR_PLL		25
> +#define SRST_GPU_DLL		26
> +#define SRST_TIMER0		27
> +#define SRST_TIMER1		28
> +#define SRST_CORE_DLL		29
> +#define SRST_EFUSE_P		30
> +#define SRST_ACODEC_P		31
> +
> +#define SRST_GPIO0		32
> +#define SRST_GPIO1		33
> +#define SRST_GPIO2		34
> +#define SRST_2RES3		35
> +#define SRST_2RES4		36
> +#define SRST_2RES5		37
> +#define SRST_2RES6		38
> +#define SRST_UART0		39
> +#define SRST_UART1		40
> +#define SRST_UART2		41
> +#define SRST_2RES10		42
> +#define SRST_I2C0		43
> +#define SRST_I2C1		44
> +#define SRST_I2C2		45
> +#define SRST_2RES14		46
> +#define SRST_SFC		47
> +
> +#define SRST_PWM0		48
> +#define SRST_3RES1		49
> +#define SRST_3RES2		50
> +#define SRST_DAP		51
> +#define SRST_DAP_SYS		52
> +#define SRST_3RES5		53
> +#define SRST_3RES6		54
> +#define SRST_GRF		55
> +#define SRST_3RES8		56
> +#define SRST_PERIPHSYS_A	57
> +#define SRST_PERIPHSYS_H	58
> +#define SRST_PERIPHSYS_P	59
> +#define SRST_3RES12		60
> +#define SRST_CPU_PERI		61
> +#define SRST_EMEM_PERI		62
> +#define SRST_USB_PERI		63
> +
> +#define SRST_DMA2		64
> +#define SRST_4RES1		65
> +#define SRST_MAC		66
> +#define SRST_4RES3		67
> +#define SRST_NANDC		68
> +#define SRST_USBOTG0		69
> +#define SRST_4RES6		70
> +#define SRST_OTGC0		71
> +#define SRST_USBOTG1		72
> +#define SRST_4RES9		73
> +#define SRST_OTGC1		74
> +#define SRST_4RES11		75
> +#define SRST_4RES12		76
> +#define SRST_4RES13		77
> +#define SRST_4RES14		78
> +#define SRST_DDRMSCH		79
> +
> +#define SRST_5RES0		80
> +#define SRST_MMC0		81
> +#define SRST_SDIO		82
> +#define SRST_EMMC		83
> +#define SRST_SPI0		84
> +#define SRST_5RES5		85
> +#define SRST_WDT		86
> +#define SRST_5RES7		87
> +#define SRST_DDRPHY		88
> +#define SRST_DDRPHY_P		89
> +#define SRST_DDRCTRL		90
> +#define SRST_DDRCTRL_P		91
> +#define SRST_5RES12		92
> +#define SRST_5RES13		93
> +#define SRST_5RES14		94
> +#define SRST_5RES15		95
> +
> +#define SRST_HDMI_P		96
> +#define SRST_6RES1		97
> +#define SRST_6RES2		98
> +#define SRST_VIO_BUS_H		99
> +#define SRST_6RES4		100
> +#define SRST_6RES5		101
> +#define SRST_6RES6		102
> +#define SRST_UTMI0		103
> +#define SRST_UTMI1		104
> +#define SRST_USBPOR		105
> +#define SRST_6RES10		106
> +#define SRST_6RES11		107
> +#define SRST_6RES12		108
> +#define SRST_6RES13		109
> +#define SRST_6RES14		110
> +#define SRST_6RES15		111
> +
> +#define SRST_VCODEC_A		112
> +#define SRST_VCODEC_H		113
> +#define SRST_VIO1_A		114
> +#define SRST_HEVC		115
> +#define SRST_VCODEC_NIU_A	116
> +#define SRST_LCDC1_A		117
> +#define SRST_LCDC1_H		118
> +#define SRST_LCDC1_D		119
> +#define SRST_GPU		120
> +#define SRST_7RES9		121
> +#define SRST_GPU_NIU_A		122
> +#define SRST_7RES11		123
> +#define SRST_7RES12		124
> +#define SRST_7RES13		125
> +#define SRST_7RES14		126
> +#define SRST_7RES15		127

please don't add reserved (aka unused) reset slots. Of course the numbering 
stays the same, so just drop the xRESy lines from the definition.
Same for all xRESy entries in this file.


> +
> +#define SRST_8RES0		128
> +#define SRST_8RES1		129
> +#define SRST_8RES2		130
> +#define SRST_DBG_P		131




More information about the Linux-rockchip mailing list