[RFC PATCH v6 1/9] mmc: dw_mmc: Add external dma interface support

Jaehoon Chung jh80.chung at samsung.com
Thu Aug 20 23:35:34 PDT 2015


On 08/21/2015 03:30 PM, Shawn Lin wrote:
> On 2015/8/21 14:27, Jaehoon Chung wrote:
>> Hi, Shawn.
>>
>> Is this based on Ulf's repository?
> 
> 
> no, it's based on "https://github.com/jh80chung/dw-mmc.git tags/dw-mmc-for-ulf-v4.2" :)

Oh..I will rebase to Ulf's next branch on this weekend.
Then could you rebase this patch? And i added more comments at below.. :)

Best Regards,
Jaehoon Chung

> 
>>
>> On 08/20/2015 05:43 PM, Shawn Lin wrote:
>>> DesignWare MMC Controller can supports two types of DMA
>>> mode: external dma and internal dma. We get a RK312x platform
>>> integrated dw_mmc and ARM pl330 dma controller. This patch add
>>> edmac ops to support these platforms. I've tested it on RK31xx
>>> platform with edmac mode and RK3288 platform with idmac mode.
>>>
>>> Signed-off-by: Shawn Lin <shawn.lin at rock-chips.com>
>>>
>>> ---
>>>
>>> Changes in v6:
>>> - add trans_mode condition for IDMAC initialization
>>>    suggested by Heiko
>>> - re-test my patch on rk3188 platform and update commit msg
>>> - update performance of pio vs edmac in cover letter
>>>
>>> Changes in v5:
>>> - add the title of cover letter
>>> - fix typo of comment
>>> - add macro for reading HCON register
>>> - add "Acked-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>" for exynos_defconfig patch
>>> - add "Acked-by: Vineet Gupta <vgupta at synopsys.com>" for axs10x_defconfig patch
>>> - add "Acked-by: Govindraj Raja <govindraj.raja at imgtec.com>" and
>>>    "Acked-by: Ralf Baechle <ralf at linux-mips.org>" for pistachio_defconfig patch
>>> - add "Acked-by: Joachim Eastwood <manabian at gmail.com>" for lpc18xx_defconfig patch
>>> - add "Acked-by: Wei Xu <xuwei5 at hisilicon.com>" for hisi_defconfig patch
>>> - rebase on "https://github.com/jh80chung/dw-mmc.git tags/dw-mmc-for-ulf-v4.2" for merging easily
>>>
>>> Changes in v4:
>>> - remove "host->trans_mode" and use "host->use_dma" to indicate
>>>    transfer mode.
>>> - remove all bt-bindings' changes since we don't need new properities.
>>> - check transfer mode at runtime by reading HCON reg
>>> - spilt defconfig changes for each sub-architecture
>>> - fix the title of cover letter
>>> - reuse some code for reducing code size
>>>
>>> Changes in v3:
>>> - choose transfer mode at runtime
>>> - remove all CONFIG_MMC_DW_IDMAC config option
>>> - add supports-idmac property for some platforms
>>>
>>> Changes in v2:
>>> - Fix typo of dev_info msg
>>> - remove unused dmach from declaration of dw_mci_dma_slave
>>>
>>>   drivers/mmc/host/Kconfig        |  11 +-
>>>   drivers/mmc/host/dw_mmc-pltfm.c |   2 +
>>>   drivers/mmc/host/dw_mmc.c       | 264 ++++++++++++++++++++++++++++++++--------
>>>   drivers/mmc/host/dw_mmc.h       |   5 +
>>>   include/linux/mmc/dw_mmc.h      |  27 +++-
>>>   5 files changed, 242 insertions(+), 67 deletions(-)
>>>
>>> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
>>> index 6a0f9c7..a86c0eb 100644
>>> --- a/drivers/mmc/host/Kconfig
>>> +++ b/drivers/mmc/host/Kconfig
>>> @@ -607,15 +607,7 @@ config MMC_DW
>>>       help
>>>         This selects support for the Synopsys DesignWare Mobile Storage IP
>>>         block, this provides host support for SD and MMC interfaces, in both
>>> -      PIO and external DMA modes.
>>> -
>>> -config MMC_DW_IDMAC
>>> -    bool "Internal DMAC interface"
>>> -    depends on MMC_DW
>>> -    help
>>> -      This selects support for the internal DMAC block within the Synopsys
>>> -      Designware Mobile Storage IP block. This disables the external DMA
>>> -      interface.
>>> +      PIO, internal DMA mode and external DMA modes.
>>>
>>>   config MMC_DW_PLTFM
>>>       tristate "Synopsys Designware MCI Support as platform device"
>>> @@ -644,7 +636,6 @@ config MMC_DW_K3
>>>       tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
>>>       depends on MMC_DW
>>>       select MMC_DW_PLTFM
>>> -    select MMC_DW_IDMAC
>>>       help
>>>         This selects support for Hisilicon K3 SoC specific extensions to the
>>>         Synopsys DesignWare Memory Card Interface driver. Select this option
>>> diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
>>> index ec6dbcd..7e1d13b 100644
>>> --- a/drivers/mmc/host/dw_mmc-pltfm.c
>>> +++ b/drivers/mmc/host/dw_mmc-pltfm.c
>>> @@ -59,6 +59,8 @@ int dw_mci_pltfm_register(struct platform_device *pdev,
>>>       host->pdata = pdev->dev.platform_data;
>>>
>>>       regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>> +    /* Get registers' physical base address */
>>> +    host->phy_regs = (void *)(regs->start);
>>>       host->regs = devm_ioremap_resource(&pdev->dev, regs);
>>>       if (IS_ERR(host->regs))
>>>           return PTR_ERR(host->regs);
>>
>> Is this board specific code? If so, separate the patch.
>>
>>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>>> index fcbf552..f943619 100644
>>> --- a/drivers/mmc/host/dw_mmc.c
>>> +++ b/drivers/mmc/host/dw_mmc.c
>>> @@ -56,7 +56,6 @@
>>>   #define DW_MCI_FREQ_MAX    200000000    /* unit: HZ */
>>>   #define DW_MCI_FREQ_MIN    400000        /* unit: HZ */
>>>
>>> -#ifdef CONFIG_MMC_DW_IDMAC
>>>   #define IDMAC_INT_CLR        (SDMMC_IDMAC_INT_AI | SDMMC_IDMAC_INT_NI | \
>>>                    SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \
>>>                    SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
>>> @@ -102,7 +101,6 @@ struct idmac_desc {
>>>
>>>   /* Each descriptor can transfer up to 4KB of data in chained mode */
>>>   #define DW_MCI_DESC_DATA_LENGTH    0x1000
>>> -#endif /* CONFIG_MMC_DW_IDMAC */
>>>
>>>   static bool dw_mci_reset(struct dw_mci *host);
>>>   static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
>>> @@ -407,7 +405,6 @@ static int dw_mci_get_dma_dir(struct mmc_data *data)
>>>           return DMA_FROM_DEVICE;
>>>   }
>>>
>>> -#ifdef CONFIG_MMC_DW_IDMAC
>>>   static void dw_mci_dma_cleanup(struct dw_mci *host)
>>>   {
>>>       struct mmc_data *data = host->data;
>>> @@ -445,12 +442,21 @@ static void dw_mci_idmac_stop_dma(struct dw_mci *host)
>>>       mci_writel(host, BMOD, temp);
>>>   }
>>>
>>> -static void dw_mci_idmac_complete_dma(struct dw_mci *host)
>>> +static void dw_mci_dmac_complete_dma(void *arg)
>>>   {
>>> +    struct dw_mci *host = arg;
>>>       struct mmc_data *data = host->data;
>>>
>>>       dev_vdbg(host->dev, "DMA complete\n");
>>>
>>> +    if (host->use_dma == TRANS_MODE_EDMAC)
>>> +        if (data && (data->flags & MMC_DATA_READ))
>>
>> Combine one condition.
>>
>>> +            /* Invalidate cache after read */
>>> +            dma_sync_sg_for_cpu(mmc_dev(host->cur_slot->mmc),
>>> +                        data->sg,
>>> +                        data->sg_len,
>>> +                        DMA_FROM_DEVICE);
>>> +
>>>       host->dma_ops->cleanup(host);
>>>
>>>       /*
>>> @@ -564,7 +570,7 @@ static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data,
>>>       wmb(); /* drain writebuffer */
>>>   }
>>>
>>> -static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
>>> +static int dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
>>>   {
>>>       u32 temp;
>>>
>>> @@ -589,6 +595,8 @@ static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
>>>
>>>       /* Start it running */
>>>       mci_writel(host, PLDMND, 1);
>>> +
>>> +    return 0;
>>>   }
>>>
>>>   static int dw_mci_idmac_init(struct dw_mci *host)
>>> @@ -669,10 +677,112 @@ static const struct dw_mci_dma_ops dw_mci_idmac_ops = {
>>>       .init = dw_mci_idmac_init,
>>>       .start = dw_mci_idmac_start_dma,
>>>       .stop = dw_mci_idmac_stop_dma,
>>> -    .complete = dw_mci_idmac_complete_dma,
>>> +    .complete = dw_mci_dmac_complete_dma,
>>> +    .cleanup = dw_mci_dma_cleanup,
>>> +};
>>> +
>>> +static void dw_mci_edmac_stop_dma(struct dw_mci *host)
>>> +{
>>> +    dmaengine_terminate_all(host->dms->ch);
>>> +}
>>> +
>>> +static int dw_mci_edmac_start_dma(struct dw_mci *host,
>>> +                        unsigned int sg_len)
>>> +{
>>> +    struct dma_slave_config cfg;
>>> +    struct dma_async_tx_descriptor *desc = NULL;
>>> +    struct scatterlist *sgl = host->data->sg;
>>> +    const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
>>> +    u32 sg_elems = host->data->sg_len;
>>> +    u32 fifoth_val;
>>> +    u32 fifo_offset = host->fifo_reg - host->regs;
>>> +    int ret = 0;
>>> +
>>> +    /* Set external dma config: burst size, burst width */
>>> +    cfg.dst_addr = (dma_addr_t)(host->phy_regs + fifo_offset);
>>
>> host->phy_regs is not assigned?
>>
>>> +    cfg.src_addr = cfg.dst_addr;
>>> +    cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
>>> +    cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
>>> +
>>> +    /* Match burst msize with external dma config */
>>> +    fifoth_val = mci_readl(host, FIFOTH);
>>> +    cfg.dst_maxburst = mszs[(fifoth_val >> 28) & 0x7];
>>> +    cfg.src_maxburst = cfg.dst_maxburst;
>>> +
>>> +    if (host->data->flags & MMC_DATA_WRITE)
>>> +        cfg.direction = DMA_MEM_TO_DEV;
>>> +    else /* MMC_DATA_READ */
>>> +        cfg.direction = DMA_DEV_TO_MEM;
>>> +
>>> +    ret = dmaengine_slave_config(host->dms->ch, &cfg);
>>> +    if (ret) {
>>> +        dev_err(host->dev, "Failed to config edmac.\n");
>>> +        return -EBUSY;
>>> +    }
>>> +
>>> +    desc = dmaengine_prep_slave_sg(host->dms->ch, sgl,
>>> +                       sg_len, cfg.direction,
>>> +                       DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
>>> +    if (!desc) {
>>> +        dev_err(host->dev, "Can't prepare slave sg.\n");
>>> +        return -EBUSY;
>>> +    }
>>> +
>>> +    /* Set dw_mci_dmac_complete_dma as callback */
>>> +    desc->callback = dw_mci_dmac_complete_dma;
>>> +    desc->callback_param = (void *)host;
>>> +    dmaengine_submit(desc);
>>> +
>>> +    /* Flush cache before write */
>>> +    if (host->data->flags & MMC_DATA_WRITE)
>>> +        dma_sync_sg_for_device(mmc_dev(host->cur_slot->mmc), sgl,
>>> +                       sg_elems, DMA_TO_DEVICE);
>>> +
>>> +    dma_async_issue_pending(host->dms->ch);
>>> +
>>> +    return 0;
>>> +}
>>> +
>>> +static int dw_mci_edmac_init(struct dw_mci *host)
>>> +{
>>> +    /* Request external dma channel */
>>> +    host->dms = kzalloc(sizeof(struct dw_mci_dma_slave), GFP_KERNEL);
>>> +    if (!host->dms)
>>> +        return -ENOMEM;
>>> +
>>> +    host->dms->ch = dma_request_slave_channel(host->dev, "rx-tx");
>>> +    if (!host->dms->ch) {
>>> +        dev_err(host->dev,
>>> +            "Failed to get external DMA channel %d\n",
>>> +            host->dms->ch->chan_id);
>>> +        kfree(host->dms);
>>> +        host->dms = NULL;
>>> +        return -ENXIO;
>>> +    }
>>> +
>>> +    return 0;
>>> +}
>>> +
>>> +static void dw_mci_edmac_exit(struct dw_mci *host)
>>> +{
>>> +    if (host->dms) {
>>> +        if (host->dms->ch) {
>>> +            dma_release_channel(host->dms->ch);
>>> +            host->dms->ch = NULL;
>>> +        }
>>> +        kfree(host->dms);
>>> +        host->dms = NULL;
>>> +    }
>>> +}
>>> +
>>> +static const struct dw_mci_dma_ops dw_mci_edmac_ops = {
>>> +    .init = dw_mci_edmac_init,
>>> +    .exit = dw_mci_edmac_exit,
>>> +    .start = dw_mci_edmac_start_dma,
>>> +    .stop = dw_mci_edmac_stop_dma,
>>> +    .complete = dw_mci_dmac_complete_dma,
>>>       .cleanup = dw_mci_dma_cleanup,
>>>   };
>>> -#endif /* CONFIG_MMC_DW_IDMAC */
>>>
>>>   static int dw_mci_pre_dma_transfer(struct dw_mci *host,
>>>                      struct mmc_data *data,
>>> @@ -752,7 +862,6 @@ static void dw_mci_post_req(struct mmc_host *mmc,
>>>
>>>   static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
>>>   {
>>> -#ifdef CONFIG_MMC_DW_IDMAC
>>>       unsigned int blksz = data->blksz;
>>>       const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
>>>       u32 fifo_width = 1 << host->data_shift;
>>> @@ -760,6 +869,10 @@ static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
>>>       u32 msize = 0, rx_wmark = 1, tx_wmark, tx_wmark_invers;
>>>       int idx = ARRAY_SIZE(mszs) - 1;
>>>
>>> +    /* pio should ship this scenario */
>>> +    if (!host->use_dma)
>>> +        return;
>>> +
>>>       tx_wmark = (host->fifo_depth) / 2;
>>>       tx_wmark_invers = host->fifo_depth - tx_wmark;
>>>
>>> @@ -788,7 +901,6 @@ static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
>>>   done:
>>>       fifoth_val = SDMMC_SET_FIFOTH(msize, rx_wmark, tx_wmark);
>>>       mci_writel(host, FIFOTH, fifoth_val);
>>> -#endif
>>>   }
>>>
>>>   static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data)
>>> @@ -850,10 +962,12 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
>>>
>>>       host->using_dma = 1;
>>>
>>> -    dev_vdbg(host->dev,
>>> -         "sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n",
>>> -         (unsigned long)host->sg_cpu, (unsigned long)host->sg_dma,
>>> -         sg_len);
>>> +    if (host->use_dma == TRANS_MODE_IDMAC)
>>> +        dev_vdbg(host->dev,
>>> +             "sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n",
>>> +             (unsigned long)host->sg_cpu,
>>> +             (unsigned long)host->sg_dma,
>>> +             sg_len);
>>>
>>>       /*
>>>        * Decide the MSIZE and RX/TX Watermark.
>>> @@ -875,7 +989,11 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
>>>       mci_writel(host, INTMASK, temp);
>>>       spin_unlock_irqrestore(&host->irq_lock, irqflags);
>>>
>>> -    host->dma_ops->start(host, sg_len);
>>> +    if (host->dma_ops->start(host, sg_len)) {
>>> +        /* We can't do DMA */
>>> +        dev_err(host->dev, "%s: failed to start DMA.\n", __func__);
>>> +        return -ENODEV;
>>> +    }
>>>
>>>       return 0;
>>>   }
>>> @@ -2343,15 +2461,17 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
>>>
>>>       }
>>>
>>> -#ifdef CONFIG_MMC_DW_IDMAC
>>> -    /* Handle DMA interrupts */
>>> +    if (host->use_dma != TRANS_MODE_IDMAC)
>>> +        return IRQ_HANDLED;
>>> +
>>> +    /* Handle IDMA interrupts */
>>>       if (host->dma_64bit_address == 1) {
>>>           pending = mci_readl(host, IDSTS64);
>>>           if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
>>>               mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI |
>>>                               SDMMC_IDMAC_INT_RI);
>>>               mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
>>> -            host->dma_ops->complete(host);
>>> +            host->dma_ops->complete((void *)host);
>>>           }
>>>       } else {
>>>           pending = mci_readl(host, IDSTS);
>>> @@ -2359,10 +2479,9 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
>>>               mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI |
>>>                               SDMMC_IDMAC_INT_RI);
>>>               mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
>>> -            host->dma_ops->complete(host);
>>> +            host->dma_ops->complete((void *)host);
>>>           }
>>>       }
>>> -#endif
>>>
>>>       return IRQ_HANDLED;
>>>   }
>>> @@ -2471,13 +2590,21 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
>>>           goto err_host_allocated;
>>>
>>>       /* Useful defaults if platform data is unset. */
>>> -    if (host->use_dma) {
>>> +    if (host->use_dma == TRANS_MODE_IDMAC) {
>>>           mmc->max_segs = host->ring_size;
>>>           mmc->max_blk_size = 65536;
>>>           mmc->max_seg_size = 0x1000;
>>>           mmc->max_req_size = mmc->max_seg_size * host->ring_size;
>>>           mmc->max_blk_count = mmc->max_req_size / 512;
>>> +    } else if (host->use_dma == TRANS_MODE_EDMAC) {
>>> +            mmc->max_segs = 64;
>>> +            mmc->max_blk_size = 65536;
>>> +            mmc->max_blk_count = 65535;
>>> +            mmc->max_req_size =
>>> +                    mmc->max_blk_size * mmc->max_blk_count;
>>> +            mmc->max_seg_size = mmc->max_req_size;
>>
>> Fix the indention
>>
>>>       } else {
>>> +        /* TRANS_MODE_PIO */
>>>           mmc->max_segs = 64;
>>>           mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
>>>           mmc->max_blk_count = 512;
>>> @@ -2517,35 +2644,66 @@ static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
>>>   static void dw_mci_init_dma(struct dw_mci *host)
>>>   {
>>>       int addr_config;
>>> -    /* Check ADDR_CONFIG bit in HCON to find IDMAC address bus width */
>>> -    addr_config = (mci_readl(host, HCON) >> 27) & 0x01;
>>> -
>>> -    if (addr_config == 1) {
>>> -        /* host supports IDMAC in 64-bit address mode */
>>> -        host->dma_64bit_address = 1;
>>> -        dev_info(host->dev, "IDMAC supports 64-bit address mode.\n");
>>> -        if (!dma_set_mask(host->dev, DMA_BIT_MASK(64)))
>>> -            dma_set_coherent_mask(host->dev, DMA_BIT_MASK(64));
>>> -    } else {
>>> -        /* host supports IDMAC in 32-bit address mode */
>>> -        host->dma_64bit_address = 0;
>>> -        dev_info(host->dev, "IDMAC supports 32-bit address mode.\n");
>>> -    }
>>> +    int trans_mode;
>>> +    struct device *dev = host->dev;
>>> +    struct device_node *np = dev->of_node;
>>>
>>> -    /* Alloc memory for sg translation */
>>> -    host->sg_cpu = dmam_alloc_coherent(host->dev, PAGE_SIZE,
>>> -                      &host->sg_dma, GFP_KERNEL);
>>> -    if (!host->sg_cpu) {
>>> -        dev_err(host->dev, "%s: could not alloc DMA memory\n",
>>> -            __func__);
>>> +    /* Check tansfer mode */
>>> +    trans_mode = SDMMC_GET_TRANS_MODE(mci_readl(host, HCON));
>>> +    if (trans_mode == 0) {
>>> +        trans_mode = TRANS_MODE_IDMAC;
>>> +    } else if (trans_mode == 1 || trans_mode == 2) {
>>> +        trans_mode = TRANS_MODE_EDMAC;
>>> +    } else {
>>> +        trans_mode = TRANS_MODE_PIO;
>>
>> what are trans_mode "0, 1, 2"?
>> (00 - none) is NO-DMA interface, isn't? is it IDMAC mode?
>>
>>>           goto no_dma;
>>>       }
>>>
>>>       /* Determine which DMA interface to use */
>>> -#ifdef CONFIG_MMC_DW_IDMAC
>>> -    host->dma_ops = &dw_mci_idmac_ops;
>>> -    dev_info(host->dev, "Using internal DMA controller.\n");
>>> -#endif
>>> +    if (trans_mode == TRANS_MODE_IDMAC) {
>>> +        /*
>>> +        * Check ADDR_CONFIG bit in HCON to find
>>> +        * IDMAC address bus width
>>> +        */
>>> +        addr_config = SDMMC_GET_ADDR_CONFIG(mci_readl(host, HCON));
>>> +
>>> +        if (addr_config == 1) {
>>> +            /* host supports IDMAC in 64-bit address mode */
>>> +            host->dma_64bit_address = 1;
>>> +            dev_info(host->dev,
>>> +                 "IDMAC supports 64-bit address mode.\n");
>>> +            if (!dma_set_mask(host->dev, DMA_BIT_MASK(64)))
>>> +                dma_set_coherent_mask(host->dev,
>>> +                              DMA_BIT_MASK(64));
>>> +        } else {
>>> +            /* host supports IDMAC in 32-bit address mode */
>>> +            host->dma_64bit_address = 0;
>>> +            dev_info(host->dev,
>>> +                 "IDMAC supports 32-bit address mode.\n");
>>> +        }
>>> +
>>> +        /* Alloc memory for sg translation */
>>> +        host->sg_cpu = dmam_alloc_coherent(host->dev, PAGE_SIZE,
>>> +                           &host->sg_dma, GFP_KERNEL);
>>> +        if (!host->sg_cpu) {
>>> +            dev_err(host->dev,
>>> +                "%s: could not alloc DMA memory\n",
>>> +                __func__);
>>> +            goto no_dma;
>>> +        }
>>> +
>>> +        host->dma_ops = &dw_mci_idmac_ops;
>>> +        dev_info(host->dev, "Using internal DMA controller.\n");
>>> +    } else {
>>> +        /* TRANS_MODE_EDMAC: check dma bindings again */
>>> +        if ((of_property_count_strings(np, "dma-names") < 0) ||
>>> +            (!of_find_property(np, "dmas", NULL))) {
>>> +            trans_mode = TRANS_MODE_PIO;
>>> +            goto no_dma;
>>> +        }
>>> +        host->dma_ops = &dw_mci_edmac_ops;
>>> +        dev_info(host->dev, "Using external DMA controller.\n");
>>> +    }
>>>
>>>       if (!host->dma_ops)
>>>           goto no_dma;
>>> @@ -2562,12 +2720,12 @@ static void dw_mci_init_dma(struct dw_mci *host)
>>>           goto no_dma;
>>>       }
>>>
>>> -    host->use_dma = 1;
>>> +    host->use_dma = trans_mode;
>>
>> Also confuse, if trans_mode is assigned host->use_dma, can mode value be directly assigned to host->use_dma?
>>
>> trans_mode = TRAMS_MODE_PIO;
>> host->use_dma = trans_mode;
>>
>> -> host->use_dma = TRAMS_MODE_PIO;
>>
>> Then trans_mode can be removed.
>>
>>>       return;
>>>
>>>   no_dma:
>>>       dev_info(host->dev, "Using PIO mode.\n");
>>> -    host->use_dma = 0;
>>> +    host->use_dma = trans_mode;
>>>   }
>>>
>>>   static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset)
>>> @@ -2650,10 +2808,9 @@ static bool dw_mci_reset(struct dw_mci *host)
>>>           }
>>>       }
>>>
>>> -#if IS_ENABLED(CONFIG_MMC_DW_IDMAC)
>>> -    /* It is also recommended that we reset and reprogram idmac */
>>> -    dw_mci_idmac_reset(host);
>>> -#endif
>>> +    if (host->use_dma == TRANS_MODE_IDMAC)
>>> +        /* It is also recommended that we reset and reprogram idmac */
>>> +        dw_mci_idmac_reset(host);
>>>
>>>       ret = true;
>>>
>>> @@ -2890,7 +3047,7 @@ int dw_mci_probe(struct dw_mci *host)
>>>        * Get the host data width - this assumes that HCON has been set with
>>>        * the correct values.
>>>        */
>>> -    i = (mci_readl(host, HCON) >> 7) & 0x7;
>>> +    i = SDMMC_GET_HDATA_WIDTH(mci_readl(host, HCON));
>>
>> This is not related with supporting external dma interface.
>> Separate this.
>>
>>>       if (!i) {
>>>           host->push_data = dw_mci_push_data16;
>>>           host->pull_data = dw_mci_pull_data16;
>>> @@ -2972,7 +3129,7 @@ int dw_mci_probe(struct dw_mci *host)
>>>       if (host->pdata->num_slots)
>>>           host->num_slots = host->pdata->num_slots;
>>>       else
>>> -        host->num_slots = ((mci_readl(host, HCON) >> 1) & 0x1F) + 1;
>>> +        host->num_slots = SDMMC_GET_SLOT_NUM(mci_readl(host, HCON));
>>
>> Ditto. (with above.)
>>
>>>
>>>       /*
>>>        * Enable interrupts for command done, data over, data empty,
>>> @@ -3067,6 +3224,9 @@ EXPORT_SYMBOL(dw_mci_remove);
>>>    */
>>>   int dw_mci_suspend(struct dw_mci *host)
>>>   {
>>> +    if (host->use_dma && host->dma_ops->exit)
>>> +        host->dma_ops->exit(host);
>>> +
>>>       return 0;
>>>   }
>>>   EXPORT_SYMBOL(dw_mci_suspend);
>>> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
>>> index 8ce4674..c453e94 100644
>>> --- a/drivers/mmc/host/dw_mmc.h
>>> +++ b/drivers/mmc/host/dw_mmc.h
>>> @@ -148,6 +148,11 @@
>>>   #define SDMMC_SET_FIFOTH(m, r, t)    (((m) & 0x7) << 28 | \
>>>                        ((r) & 0xFFF) << 16 | \
>>>                        ((t) & 0xFFF))
>>> +/* HCON register defines */
>>> +#define SDMMC_GET_SLOT_NUM(x)        ((((x)>>1) & 0x1F) + 1)
>>> +#define SDMMC_GET_HDATA_WIDTH(x)    (((x)>>7) & 0x7)
>>> +#define SDMMC_GET_TRANS_MODE(x)        (((x)>>16) & 0x3)
>>> +#define SDMMC_GET_ADDR_CONFIG(x)    (((x)>>27) & 0x1)
>>>   /* Internal DMAC interrupt defines */
>>>   #define SDMMC_IDMAC_INT_AI        BIT(9)
>>>   #define SDMMC_IDMAC_INT_NI        BIT(8)
>>> diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
>>> index c846f42..6a2b83c 100644
>>> --- a/include/linux/mmc/dw_mmc.h
>>> +++ b/include/linux/mmc/dw_mmc.h
>>> @@ -16,6 +16,7 @@
>>>
>>>   #include <linux/scatterlist.h>
>>>   #include <linux/mmc/core.h>
>>> +#include <linux/dmaengine.h>
>>>
>>>   #define MAX_MCI_SLOTS    2
>>>
>>> @@ -40,6 +41,17 @@ enum {
>>>
>>>   struct mmc_data;
>>>
>>> +enum {
>>> +    TRANS_MODE_PIO = 0,
>>> +    TRANS_MODE_IDMAC,
>>> +    TRANS_MODE_EDMAC
>>> +};
>>> +
>>> +struct dw_mci_dma_slave {
>>> +    struct dma_chan *ch;
>>> +    enum dma_transfer_direction direction;
>>> +};
>>> +
>>>   /**
>>>    * struct dw_mci - MMC controller state shared between all slots
>>>    * @lock: Spinlock protecting the queue and associated data.
>>> @@ -154,11 +166,16 @@ struct dw_mci {
>>>       dma_addr_t        sg_dma;
>>>       void            *sg_cpu;
>>>       const struct dw_mci_dma_ops    *dma_ops;
>>> -#ifdef CONFIG_MMC_DW_IDMAC
>>> +    /* For idmac */
>>>       unsigned int        ring_size;
>>> -#else
>>> +
>>> +    /* For edmac */
>>> +    struct dw_mci_dma_slave *dms;
>>> +    /* Registers's physical base address */
>>> +    void                    *phy_regs;
>>> +
>>>       struct dw_mci_dma_data    *dma_data;
>>> -#endif
>>> +
>>
>> On ulf's repository, this point should be conflicted.
>>
>> Best Regards,
>> Jaehoon Chung
>>
>>>       u32            cmd_status;
>>>       u32            data_status;
>>>       u32            stop_cmdr;
>>> @@ -212,8 +229,8 @@ struct dw_mci {
>>>   struct dw_mci_dma_ops {
>>>       /* DMA Ops */
>>>       int (*init)(struct dw_mci *host);
>>> -    void (*start)(struct dw_mci *host, unsigned int sg_len);
>>> -    void (*complete)(struct dw_mci *host);
>>> +    int (*start)(struct dw_mci *host, unsigned int sg_len);
>>> +    void (*complete)(void *host);
>>>       void (*stop)(struct dw_mci *host);
>>>       void (*cleanup)(struct dw_mci *host);
>>>       void (*exit)(struct dw_mci *host);
>>>
>>
>>
>>
>>
> 
> 




More information about the Linux-rockchip mailing list