[PATCH v3] iio: adc: rockchip_saradc: add support for rk3066-tsadc variant

Jonathan Cameron jic23 at kernel.org
Sun Sep 21 05:40:50 PDT 2014


On 16/09/14 23:08, Hartmut Knaack wrote:
> Heiko Stübner schrieb, Am 15.09.2014 23:47:
>> Older Rockchip SoCs, at least the rk3066, used a slightly modified saradc
>> for temperature measurements. This so called tsadc does not contain any
>> active parts like temperature interrupts and only supports polling the
>> current temperature. The returned voltage can then be converted by a
>> suitable thermal driver to and actual temperature and used for thermal
>> handling.
>>
>> Signed-off-by: Heiko Stuebner <heiko at sntech.de>
> Acked-by: Hartmut Knaack <knaack.h at gmx.de>
Applied to the togreg branch of iio.git -initially pushed out as testing
for the autobuilders to play.

Thanks,

Jonathan
>> ---
>> changes since v2:
>> - adapt message about the clk rate
>> changes since v1:
>> - use GENMASK instead of creating the mask manually
>>   as suggested by Hartmut Knaack
>>
>>  .../bindings/iio/adc/rockchip-saradc.txt           |  2 +-
>>  drivers/iio/adc/rockchip_saradc.c                  | 64 +++++++++++++++++-----
>>  2 files changed, 51 insertions(+), 15 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
>> index 5d3ec1d..a9a5fe1 100644
>> --- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
>> +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
>> @@ -1,7 +1,7 @@
>>  Rockchip Successive Approximation Register (SAR) A/D Converter bindings
>>  
>>  Required properties:
>> -- compatible: Should be "rockchip,saradc"
>> +- compatible: Should be "rockchip,saradc" or "rockchip,rk3066-tsadc"
>>  - reg: physical base address of the controller and length of memory mapped
>>         region.
>>  - interrupts: The interrupt number to the cpu. The interrupt specifier format
>> diff --git a/drivers/iio/adc/rockchip_saradc.c b/drivers/iio/adc/rockchip_saradc.c
>> index e074a0b..b546bc1 100644
>> --- a/drivers/iio/adc/rockchip_saradc.c
>> +++ b/drivers/iio/adc/rockchip_saradc.c
>> @@ -18,13 +18,13 @@
>>  #include <linux/interrupt.h>
>>  #include <linux/io.h>
>>  #include <linux/of.h>
>> +#include <linux/of_device.h>
>>  #include <linux/clk.h>
>>  #include <linux/completion.h>
>>  #include <linux/regulator/consumer.h>
>>  #include <linux/iio/iio.h>
>>  
>>  #define SARADC_DATA			0x00
>> -#define SARADC_DATA_MASK		0x3ff
>>  
>>  #define SARADC_STAS			0x04
>>  #define SARADC_STAS_BUSY		BIT(0)
>> @@ -38,15 +38,22 @@
>>  #define SARADC_DLY_PU_SOC		0x0c
>>  #define SARADC_DLY_PU_SOC_MASK		0x3f
>>  
>> -#define SARADC_BITS			10
>>  #define SARADC_TIMEOUT			msecs_to_jiffies(100)
>>  
>> +struct rockchip_saradc_data {
>> +	int				num_bits;
>> +	const struct iio_chan_spec	*channels;
>> +	int				num_channels;
>> +	unsigned long			clk_rate;
>> +};
>> +
>>  struct rockchip_saradc {
>>  	void __iomem		*regs;
>>  	struct clk		*pclk;
>>  	struct clk		*clk;
>>  	struct completion	completion;
>>  	struct regulator	*vref;
>> +	const struct rockchip_saradc_data *data;
>>  	u16			last_val;
>>  };
>>  
>> @@ -90,7 +97,7 @@ static int rockchip_saradc_read_raw(struct iio_dev *indio_dev,
>>  		}
>>  
>>  		*val = ret / 1000;
>> -		*val2 = SARADC_BITS;
>> +		*val2 = info->data->num_bits;
>>  		return IIO_VAL_FRACTIONAL_LOG2;
>>  	default:
>>  		return -EINVAL;
>> @@ -103,7 +110,7 @@ static irqreturn_t rockchip_saradc_isr(int irq, void *dev_id)
>>  
>>  	/* Read value */
>>  	info->last_val = readl_relaxed(info->regs + SARADC_DATA);
>> -	info->last_val &= SARADC_DATA_MASK;
>> +	info->last_val &= GENMASK(info->data->num_bits - 1, 0);
>>  
>>  	/* Clear irq & power down adc */
>>  	writel_relaxed(0, info->regs + SARADC_CTRL);
>> @@ -133,12 +140,44 @@ static const struct iio_chan_spec rockchip_saradc_iio_channels[] = {
>>  	ADC_CHANNEL(2, "adc2"),
>>  };
>>  
>> +static const struct rockchip_saradc_data saradc_data = {
>> +	.num_bits = 10,
>> +	.channels = rockchip_saradc_iio_channels,
>> +	.num_channels = ARRAY_SIZE(rockchip_saradc_iio_channels),
>> +	.clk_rate = 1000000,
>> +};
>> +
>> +static const struct iio_chan_spec rockchip_rk3066_tsadc_iio_channels[] = {
>> +	ADC_CHANNEL(0, "adc0"),
>> +	ADC_CHANNEL(1, "adc1"),
>> +};
>> +
>> +static const struct rockchip_saradc_data rk3066_tsadc_data = {
>> +	.num_bits = 12,
>> +	.channels = rockchip_rk3066_tsadc_iio_channels,
>> +	.num_channels = ARRAY_SIZE(rockchip_rk3066_tsadc_iio_channels),
>> +	.clk_rate = 50000,
>> +};
>> +
>> +static const struct of_device_id rockchip_saradc_match[] = {
>> +	{
>> +		.compatible = "rockchip,saradc",
>> +		.data = &saradc_data,
>> +	}, {
>> +		.compatible = "rockchip,rk3066-tsadc",
>> +		.data = &rk3066_tsadc_data,
>> +	},
>> +	{},
>> +};
>> +MODULE_DEVICE_TABLE(of, rockchip_saradc_match);
>> +
>>  static int rockchip_saradc_probe(struct platform_device *pdev)
>>  {
>>  	struct rockchip_saradc *info = NULL;
>>  	struct device_node *np = pdev->dev.of_node;
>>  	struct iio_dev *indio_dev = NULL;
>>  	struct resource	*mem;
>> +	const struct of_device_id *match;
>>  	int ret;
>>  	int irq;
>>  
>> @@ -152,6 +191,9 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
>>  	}
>>  	info = iio_priv(indio_dev);
>>  
>> +	match = of_match_device(rockchip_saradc_match, &pdev->dev);
>> +	info->data = match->data;
>> +
>>  	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>  	info->regs = devm_ioremap_resource(&pdev->dev, mem);
>>  	if (IS_ERR(info->regs))
>> @@ -192,10 +234,10 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
>>  	}
>>  
>>  	/*
>> -	 * Use a default of 1MHz for the converter clock.
>> +	 * Use a default value for the converter clock.
>>  	 * This may become user-configurable in the future.
>>  	 */
>> -	ret = clk_set_rate(info->clk, 1000000);
>> +	ret = clk_set_rate(info->clk, info->data->clk_rate);
>>  	if (ret < 0) {
>>  		dev_err(&pdev->dev, "failed to set adc clk rate, %d\n", ret);
>>  		return ret;
>> @@ -227,8 +269,8 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
>>  	indio_dev->info = &rockchip_saradc_iio_info;
>>  	indio_dev->modes = INDIO_DIRECT_MODE;
>>  
>> -	indio_dev->channels = rockchip_saradc_iio_channels;
>> -	indio_dev->num_channels = ARRAY_SIZE(rockchip_saradc_iio_channels);
>> +	indio_dev->channels = info->data->channels;
>> +	indio_dev->num_channels = info->data->num_channels;
>>  
>>  	ret = iio_device_register(indio_dev);
>>  	if (ret)
>> @@ -296,12 +338,6 @@ static int rockchip_saradc_resume(struct device *dev)
>>  static SIMPLE_DEV_PM_OPS(rockchip_saradc_pm_ops,
>>  			 rockchip_saradc_suspend, rockchip_saradc_resume);
>>  
>> -static const struct of_device_id rockchip_saradc_match[] = {
>> -	{ .compatible = "rockchip,saradc" },
>> -	{},
>> -};
>> -MODULE_DEVICE_TABLE(of, rockchip_saradc_match);
>> -
>>  static struct platform_driver rockchip_saradc_driver = {
>>  	.probe		= rockchip_saradc_probe,
>>  	.remove		= rockchip_saradc_remove,
>>
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 



More information about the Linux-rockchip mailing list