[PATCH v2 0/4] regulator: add support for syr82x to fan53555

[Heiko Stuebner]

Silergy SYR827 and SYR828 regulators use the completely same i2c interface
as the fan53555 regulators - only with different voltage ranges.
They are used in a some Rockchip rk3288 board designs around an act8846.

Therefore first add devicetree support for the fan53555 in general and
then support for the Silgery variants.

Tested on a rk3288 based Netxeon R89 board as cpu voltage regulator.

changes since v1:
- drop already applied vin-supply patch
- drop wrong regulator-naming patch
- add patch to generalize ramp_delay handling

Heiko Stuebner (4):
  regulator: fan53555: use set_ramp_delay to set the ramp up slew rate
  dt-bindings: add devicetree bindings for Fairchild FAN53555 regulators
  regulator: fan53555: add devicetree support
  regulator: fan53555: add support for Silergy SYR82x regulators

 .../devicetree/bindings/regulator/fan53555.txt     |  23 +++
 .../devicetree/bindings/vendor-prefixes.txt        |   2 +
 drivers/regulator/fan53555.c                       | 191 ++++++++++++++++++---
 3 files changed, 193 insertions(+), 23 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/regulator/fan53555.txt

-- 
2.0.1