[PATCH 3/4] ARM: dts: Add emac nodes to the rk3188 device tree
Romain Perier
romain.perier at gmail.com
Wed Sep 3 09:52:44 PDT 2014
This adds support for EMAC Rockchip driver on RK3188 SoCs.
Signed-off-by: Romain Perier <romain.perier at gmail.com>
---
arch/arm/boot/dts/rk3188.dtsi | 18 ++++++++++++++++++
arch/arm/boot/dts/rk3xxx.dtsi | 17 +++++++++++++++++
2 files changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index ee801a9..a182713 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -147,6 +147,24 @@
bias-disable;
};
+ emac {
+ emac_xfer: emac-xfer {
+ rockchip,pins = <RK_GPIO3 16 RK_FUNC_2 &pcfg_pull_none>, //tx_en
+ <RK_GPIO3 17 RK_FUNC_2 &pcfg_pull_none>, //txd1
+ <RK_GPIO3 18 RK_FUNC_2 &pcfg_pull_none>, //txd0
+ <RK_GPIO3 19 RK_FUNC_2 &pcfg_pull_none>, //rxd0
+ <RK_GPIO3 20 RK_FUNC_2 &pcfg_pull_none>, //rxd1
+ <RK_GPIO3 21 RK_FUNC_2 &pcfg_pull_none>, //mac_clk
+ <RK_GPIO3 22 RK_FUNC_2 &pcfg_pull_none>, //rx_err
+ <RK_GPIO3 23 RK_FUNC_2 &pcfg_pull_none>; //crs_dvalid
+ };
+
+ emac_mdio: emac-mdio {
+ rockchip,pins = <RK_GPIO3 24 RK_FUNC_2 &pcfg_pull_none>,
+ <RK_GPIO3 25 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins = <RK_GPIO1 24 RK_FUNC_1 &pcfg_pull_none>,
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 8caf85d..208b1df 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -91,6 +91,23 @@
status = "disabled";
};
+ emac: ethernet at 10204000 {
+ compatible = "snps,arc-emac";
+ reg = <0x10204000 0x3c>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rockchip,grf = <&grf>;
+
+ clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
+ clock-names = "hclk", "macref";
+ max-speed = <100>;
+ phy-mode = "rmii";
+
+ status = "disabled";
+ };
+
mmc0: dwmmc at 10214000 {
compatible = "rockchip,rk2928-dw-mshc";
reg = <0x10214000 0x1000>;
--
1.9.1
More information about the Linux-rockchip
mailing list