[PATCH v1 4/4] ARM: dts: rockchip: Enable emac node in rk3066a-marsboard

[Heiko Stübner]

Am Dienstag, 28. Oktober 2014, 12:24:22 schrieb Romain Perier:
> This enables EMAC Rockchip and adds initial ethernet support
> for the MarsBoard RK3066.
> 
> Signed-off-by: Romain Perier <romain.perier at gmail.com>

please reorder your series a bit:

Patch1: ARM: dts: rockchip: Add EMAC Rockchip for RK3066 SoCs
Patch2: old patches 1,2,4 combined into one single patch


> ---
>  arch/arm/boot/dts/rk3066a-marsboard.dts | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts
> b/arch/arm/boot/dts/rk3066a-marsboard.dts index 146bd61..560070c 100644
> --- a/arch/arm/boot/dts/rk3066a-marsboard.dts
> +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts
> @@ -122,6 +122,30 @@
>  /* must be included after &tps gets defined */
>  #include "tps65910.dtsi"
> 
> +&emac {
> +	status = "okay";
> +
> +	phy = <&phy0>;
> +	phy-supply = <&vaux33_reg>;

&vcc_rmii as explained in the other mail

> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
> +
> +	phy0: ethernet-phy at 0 {
> +		reg = <0>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> +	};
> +};
> +
> +&pinctrl {
> +	lan8720a {
> +		phy_int: phy-int {
> +			rockchip,pins = <RK_GPIO1 26 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +};
> +
>  &uart0 {
>  	status = "okay";
>  };