[PATCH] clk: rockchip: disable unused clocks

[Doug Anderson]

Kever,

On Wed, Oct 29, 2014 at 3:06 AM, Kever Yang <kever.yang at rock-chips.com> wrote:
> The rockchip clock driver use CLK_IGNORE_UNUSED flag to make sure
> all the clocks are available like default power on state.
> We have implement the clock manage in most of rockchip drivers,
> it is time to remove it for power save.
> Instead we add CLK_IGNORE_UNUSED for some clock nodes which should
> be on during boot or no module driver in kernel will initialize it.
>
> Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
> ---
>
>  drivers/clk/rockchip/clk-rk3188.c |  32 ++++-----
>  drivers/clk/rockchip/clk-rk3288.c | 146 +++++++++++++++++++-------------------
>  drivers/clk/rockchip/clk.c        |   9 ---
>  3 files changed, 90 insertions(+), 97 deletions(-)

Your patch didn't seem to apply to the top of Heiko's
"v3.19-clk/next".  Where should it apply to?

> -       GATE(ACLK_CPU, "aclk_cpu", "aclk_cpu_pre", 0,
> +       GATE(0, "aclk_cpu", "aclk_cpu_pre", CLK_IGNORE_UNUSED,
>                         RK3288_CLKGATE_CON(0), 3, GFLAGS),

It seems strange to me that you're removing the ACLK_CPU ID here.  Was
that on purpose?

> -       COMPOSITE_NOMUX(PCLK_CPU, "pclk_cpu", "aclk_cpu_pre", 0,
> +       COMPOSITE_NOMUX(0, "pclk_cpu", "aclk_cpu_pre", CLK_IGNORE_UNUSED,
>                         RK3288_CLKSEL_CON(1), 12, 3, DFLAGS,
>                         RK3288_CLKGATE_CON(0), 5, GFLAGS),

Here too for PCLK_CPU.  There are a few others as well.


I'll also say that when I applied this atop my local tree that USB
stopped working.  I just see:

[ 1647.626747] hub 2-1:1.0: hub_port_status failed (err = -110)
[ 1657.626746] hub 2-1:1.0: hub_port_status failed (err = -110)

...over and over and over again.