[alsa-devel] [PATCH] ASoC: rockchip-i2s: add rockchip-max98090 driver support

[Lars-Peter Clausen]

On 10/21/2014 01:31 PM, Jianqun wrote:
> This patch is to add support for rockchip board with max98090 codec.
> It also needs sound node in dt file.
>
> Tested on rockchip board based on rk3288.
>
> Signed-off-by: Jianqun <jay.xu at rock-chips.com>
> ---
>   sound/soc/rockchip/Kconfig | 13 +++++++++++++
>   1 file changed, 13 insertions(+)
>
> diff --git a/sound/soc/rockchip/Kconfig b/sound/soc/rockchip/Kconfig
> index 78fc159..482cbba 100644
> --- a/sound/soc/rockchip/Kconfig
> +++ b/sound/soc/rockchip/Kconfig
> @@ -9,3 +9,16 @@ config SND_SOC_ROCKCHIP
>
>   config SND_SOC_ROCKCHIP_I2S
>   	tristate
> +	depends on CLKDEV_LOOKUP && SND_SOC_ROCKCHIP
> +	help
> +	  Say Y or M if you want to add support for I2S driver for Rockchip
> +	  I2S device.
> +
> +config SND_SOC_ROCKCHIP_MAX98090
> +	tristate "ASoC support Rockchip board with max98090"
> +	depends on I2C && GPIOLIB
> +	select SND_SOC_ROCKCHIP_I2S
> +	select SND_SOC_MAX98090
> +	help
> +	  Say Y or M here if you want to add support for Rockchio board using
> +	  a max98090 codec.
>

Just make the max98090 driver directly selectable. That's what we typically 
do for DT based designs.

- Lars