[PATCH] usb: dwc2: resume root hub when device detect with suspend state

Kever Yang kever.yang at rock-chips.com
Mon Nov 17 07:21:26 PST 2014


This patch is no complete, Sorry for that, I will upload a new version 
tomorrow.

- Kever

On 11/17/2014 09:14 PM, Kever Yang wrote:
> After we implement the bus_suspend/resume, auto suspend id enabled.
> The root hub will be auto suspend if there is no device connected,
> we need to resume the root hub when a device connect detect.
>
> This patch tested on rk3288.
>
> Signed-off-by: Roy Li <roy.li at rock-chips.com>
> Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
> ---
>
>   drivers/usb/dwc2/hcd_intr.c | 7 +++++++
>   1 file changed, 7 insertions(+)
>
> diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
> index 551ba87..c8299fd 100644
> --- a/drivers/usb/dwc2/hcd_intr.c
> +++ b/drivers/usb/dwc2/hcd_intr.c
> @@ -355,6 +355,13 @@ static void dwc2_port_intr(struct dwc2_hsotg *hsotg)
>   		hprt0_modify |= HPRT0_CONNDET;
>   
>   		/*
> +		 * Check if root hub is in suspend state
> +		 * if root hub in suspend, resume it.
> +		 */
> +		if ((bus->root_hub) && (hcd->state == HC_STATE_SUSPENDED))
> +			usb_hcd_resume_root_hub(hcd);
> +
> +		/*
>   		 * The Hub driver asserts a reset when it sees port connect
>   		 * status change flag
>   		 */




More information about the Linux-rockchip mailing list