[PATCH v4 1/5] phy: add a driver for the Rockchip SoC internal USB2.0 PHY

Romain Perier romain.perier at gmail.com
Tue Dec 9 02:41:36 PST 2014


Hi,

2014-12-09 3:43 GMT+01:00 Yunzhi Li <lyz at rock-chips.com>:
> Changes in v3:
> - Use BIT macro instead of bit shift ops.
> - Rename the config entry to PHY_ROCKCHIP_USB.

Contradiction between this , [1] and [2]
>
>  drivers/phy/Kconfig            |   7 ++
>  drivers/phy/Makefile           |   1 +
>  drivers/phy/phy-rockchip-usb.c | 211 +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 219 insertions(+)
>  create mode 100644 drivers/phy/phy-rockchip-usb.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index ccad880..8a39d2a 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -239,6 +239,13 @@ config PHY_QCOM_IPQ806X_SATA
>         depends on OF
>         select GENERIC_PHY
>
> +config PHY_ROCKCHIP_USB2
> +       tristate "Rockchip USB2 PHY Driver"
> +       depends on ARCH_ROCKCHIP && OF
> +       select GENERIC_PHY
> +       help
> +         Enable this to support the Rockchip USB 2.0 PHY.
> +

1. The config entry ends by "USB2". Explain that your driver is for
usb 2.0 in the description is enough, imho.

>  config PHY_ST_SPEAR1310_MIPHY
>         tristate "ST SPEAR1310-MIPHY driver"
>         select GENERIC_PHY
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index aa74f96..8a13f72 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -28,6 +28,7 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
>  phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)     += phy-s5pv210-usb2.o
>  obj-$(CONFIG_PHY_EXYNOS5_USBDRD)       += phy-exynos5-usbdrd.o
>  obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)    += phy-qcom-apq8064-sata.o
> +obj-$(CONFIG_PHY_ROCKCHIP_USB2) += phy-rockchip-usb.o

2. and... this :)

Romain



More information about the Linux-rockchip mailing list