[PATCH v3 13/19] clk: starfive: jh7110-vout: Allow pixel clock rate propagation

[Jerome Brunet]

On ven. 04 sept. 2026 at 15:27, Michal Wilczynski <m.wilczynski at samsung.com> wrote:

> The dc8200_pix0 and dc8200_pix1 MUXes feed the display controller, and
> the rate they carry is ultimately produced by the HDMI PHY, which
> registers hdmitx0_pixelclk as a clock provider.
>
> Add CLK_SET_RATE_PARENT to both MUXes so a rate requested on them
> reaches that parent, instead of being clamped to whatever rate the
> parent already happens to run at.
>
> Co-developed-by: Dominique Belhachemi <db at domibel.de>
> Signed-off-by: Dominique Belhachemi <db at domibel.de>
> Signed-off-by: Michal Wilczynski <m.wilczynski at samsung.com>
> ---
>  drivers/clk/starfive/clk-starfive-jh7110-vout.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/starfive/clk-starfive-jh7110-vout.c b/drivers/clk/starfive/clk-starfive-jh7110-vout.c
> index bad20d5d794a72f071b4d547b7304786a8ba9afa..aeba42cd3c44ba205ced52b1826d2d2de82ad78f 100644
> --- a/drivers/clk/starfive/clk-starfive-jh7110-vout.c
> +++ b/drivers/clk/starfive/clk-starfive-jh7110-vout.c
> @@ -40,10 +40,12 @@ static const struct jh71x0_clk_data jh7110_voutclk_data[] = {
>  	JH71X0_GATE(JH7110_VOUTCLK_DC8200_AXI, "dc8200_axi", 0, JH7110_VOUTCLK_VOUT_TOP_AXI),
>  	JH71X0_GATE(JH7110_VOUTCLK_DC8200_CORE, "dc8200_core", 0, JH7110_VOUTCLK_VOUT_TOP_AXI),
>  	JH71X0_GATE(JH7110_VOUTCLK_DC8200_AHB, "dc8200_ahb", 0, JH7110_VOUTCLK_VOUT_TOP_AHB),
> -	JH71X0_GMUX(JH7110_VOUTCLK_DC8200_PIX0, "dc8200_pix0", 0, 2,
> +	JH71X0_GMUX(JH7110_VOUTCLK_DC8200_PIX0, "dc8200_pix0",
> +		    CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT, 2,

I see that you've added CLK_SET_RATE_NO_REPARENT following a previous
sashiko advice.

Note that saying it will 'hijack' the parent without it is kind of
strong. It is fine to let a mux reparent while setting a rate, as long
as you understand the possible consequences for the rest of the tree.

Regardless

Reviewed-by: Jerome Brunet <jbrunet at baylibre.com>

>  		    JH7110_VOUTCLK_DC8200_PIX,
>  		    JH7110_VOUTCLK_HDMITX0_PIXELCLK),
> -	JH71X0_GMUX(JH7110_VOUTCLK_DC8200_PIX1, "dc8200_pix1", 0, 2,
> +	JH71X0_GMUX(JH7110_VOUTCLK_DC8200_PIX1, "dc8200_pix1",
> +		    CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT, 2,
>  		    JH7110_VOUTCLK_DC8200_PIX,
>  		    JH7110_VOUTCLK_HDMITX0_PIXELCLK),
>  	/* LCD */
>
> -- 
> 2.34.1
>

-- 
Jerome