[PATCH v2 7/9] riscv: dts: spacemit: enable USB2.0 controllers on BananaPi F3

[Junzhong Pan]

On BananaPi F3, usb2_0 is connected to a Type-C connector at device
mode by default. This port have no VBUS supply capability, thus host
mode only works with self-powered device or hub. User could switch the
role in sysfs.

And the usb2_1 is connected to the USB2.0 pins of the Mini PCIe slot to
support cellular modules.

Tested-by: Ze Huang <huang.ze at linux.dev>
Signed-off-by: Junzhong Pan <panjunzhong at linux.spacemit.com>
---
 arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
index 58035d886bf6..ce36250e2deb 100644
--- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
@@ -383,10 +383,26 @@ &uart0 {
 	status = "okay";
 };
 
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
 &usbphy2 {
 	status = "okay";
 };
 
+&usb2_0 {
+	status = "okay";
+};
+
+&usb2_1 {
+	status = "okay";
+};
+
 &usb_dwc3 {
 	dr_mode = "host";
 	#address-cells = <1>;

-- 
2.34.1