[PATCH] ACPI: RIMT: Enable PCI ACS for root complexes mapped to an IOMMU

Sunil V L sunilvl at oss.qualcomm.com
Wed Sep 2 21:45:18 PDT 2026


On Wed, Sep 2, 2026 at 7:31 PM <fangyu.yu at linux.alibaba.com> wrote:
>
> From: Fangyu Yu <fangyu.yu at linux.alibaba.com>
>
> Mirror the ACPI IORT solution used on arm64 (see iort_enable_acs())
> by scanning the RIMT table for PCIe root complex nodes during
> riscv_acpi_rimt_init(), which runs before ACPI PCI enumeration. If a
> root complex node's ID mapping points at an IOMMU node, call
> pci_request_acs() immediately, so pci_acs_enable is already set by
> the time any PCI device is scanned and pci_enable_acs() runs.
>
> Only one call to pci_request_acs() is needed regardless of how many
> root complexes are found, so track that with a static acs_enabled
> flag, same as iort_enable_acs() does.
>
> Signed-off-by: Fangyu Yu <fangyu.yu at linux.alibaba.com>
> ---
>  drivers/acpi/riscv/rimt.c | 56 +++++++++++++++++++++++++++++++++++++++
>  1 file changed, 56 insertions(+)
>
> diff --git a/drivers/acpi/riscv/rimt.c b/drivers/acpi/riscv/rimt.c
> index e4538fa6c2c8..f22e28c8211e 100644
> --- a/drivers/acpi/riscv/rimt.c
> +++ b/drivers/acpi/riscv/rimt.c
> @@ -179,6 +179,42 @@ static struct acpi_rimt_node *rimt_scan_node(enum acpi_rimt_node_type type,
>         return NULL;
>  }
>
> +#ifdef CONFIG_PCI
> +static void __init rimt_enable_acs(struct acpi_rimt_node *rimt_node)
> +{
> +       static bool acs_enabled __initdata;
> +       struct acpi_rimt_pcie_rc *pci_rc;
> +       struct acpi_rimt_id_mapping *map;
> +       struct acpi_rimt_node *parent;
> +       int i;
> +
> +       if (acs_enabled || rimt_node->type != ACPI_RIMT_NODE_TYPE_PCIE_ROOT_COMPLEX)
> +               return;
> +
> +       pci_rc = (struct acpi_rimt_pcie_rc *)rimt_node->node_data;
> +       if (!pci_rc->id_mapping_offset || !pci_rc->num_id_mappings)
> +               return;
> +
> +       map = ACPI_ADD_PTR(struct acpi_rimt_id_mapping, rimt_node,
> +                          pci_rc->id_mapping_offset);
> +
> +       for (i = 0; i < pci_rc->num_id_mappings; i++, map++) {
> +               if (!map->dest_offset)
> +                       continue;
> +
> +               parent = ACPI_ADD_PTR(struct acpi_rimt_node, rimt_table,
> +                                     map->dest_offset);
> +               if (parent->type == ACPI_RIMT_NODE_TYPE_IOMMU) {
> +                       pci_request_acs();
> +                       acs_enabled = true;
> +                       return;
> +               }
> +       }
> +}
> +#else
> +static inline void rimt_enable_acs(struct acpi_rimt_node *rimt_node) { }
> +#endif
> +
>  /*
>   * RISC-V supports IOMMU as a PCI device or a platform device.
>   * When it is a platform device, there should be a namespace device as
> @@ -509,7 +545,10 @@ int rimt_iommu_configure_id(struct device *dev, const u32 *id_in)
>
>  void __init riscv_acpi_rimt_init(void)
>  {
> +       struct acpi_rimt_node *rimt_node, *rimt_end;
> +       struct acpi_table_rimt *rimt;
>         acpi_status status;
> +       int i;
>
>         /* rimt_table will be used at runtime after the rimt init,
>          * so we don't need to call acpi_put_table() to release
> @@ -525,4 +564,21 @@ void __init riscv_acpi_rimt_init(void)
>
>                 return;
>         }
> +
> +       rimt = (struct acpi_table_rimt *)rimt_table;
> +       rimt_node = ACPI_ADD_PTR(struct acpi_rimt_node, rimt,
> +                                rimt->node_offset);
> +       rimt_end = ACPI_ADD_PTR(struct acpi_rimt_node, rimt_table,
> +                               rimt_table->length);
> +
> +       for (i = 0; i < rimt->num_nodes; i++) {
> +               if (rimt_node >= rimt_end) {
> +                       pr_err("RIMT node pointer overflows, bad table\n");
> +                       return;
> +               }
> +
> +               rimt_enable_acs(rimt_node);
>
NIT: Can we check here itself if it is a PCI RC node and then only
call enable_acs()?

> +               rimt_node = ACPI_ADD_PTR(struct acpi_rimt_node, rimt_node,
> +                                        rimt_node->length);
> +       }
>  }
> --
> 2.50.1
>
Otherwise, LGTM.

Reviewed-by: Sunil V L <sunilvl at oss.qualcomm.com>



More information about the linux-riscv mailing list