[PATCH 5/9] riscv: dts: ultrarisc: Add initial device tree for UltraRISC DP1000
Jia Wang
wangjia at ultrarisc.com
Wed May 27 00:04:14 PDT 2026
On 2026-05-21 23:05 +0200, Krzysztof Kozlowski wrote:
> On 15/05/2026 03:18, Jia Wang via B4 Relay wrote:
> > +
> > + cluster0_l3: l3-cache0 {
> > + /* L3 cache:
>
> Use Linux coding style. In other places as well. Even netdev does not
> use that style anymore!
>
Will fix comment style, thanks!
> > + * cache-unified, block-size 64B
> > + * 16-way set associative, size 4MB
> > + * per-cluster.
> > + */
> > + compatible = "cache";
> > + cache-block-size = <64>;
> > + cache-level = <3>;
> > + cache-size = <0x400000>;
> > + cache-sets = <0x1000>;
> > + cache-unified;
> > + next-level-cache = <&l4_cache>;
> > + };
> > +
> > + cluster1_l3: l3-cache1 {
> > + /* L3 cache:
> > + * cache-unified, block-size 64B
> > + * 16-way set associative, size 4MB
> > + * per-cluster.
> > + */
> > + compatible = "cache";
> > + cache-block-size = <64>;
> > + cache-level = <3>;
> > + cache-size = <0x400000>;
> > + cache-sets = <0x1000>;
> > + cache-unified;
> > + next-level-cache = <&l4_cache>;
> > + };
> > + };
> > +
> > + clocks {
> > + device_clk: device_clk {
>
> You need to follow DTS coding style.
>
> Anyway, something like "device clock" is completely uninformative or
> even incorrect. I really doubt such thing as "device clock" exists...
>
> Please use name for all fixed clocks which matches current format
> recommendation: 'clock-<freq>' (see also the pattern in the binding for
> any other options).
>
> https://web.git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/clock/fixed-clock.yaml
>
Will fix the clock naming.
As discussed with Conor, I will also introduce a separate read-only clock
driver and binding in a separate series to replace the current fixed-clock
usage. The DTS will be updated accordingly once this new clock is in place.
> > + compatible = "fixed-clock";
> > + clock-frequency = <62500000>;
> > + #clock-cells = <0>;
> > + };
> > +
> > + timer_clk: timer_clk {
> > + compatible = "fixed-clock";
> > + clock-frequency = <50000000>;
> > + #clock-cells = <0>;
> > + };
> > +
> > + csr_clk: csr_clk {
> > + compatible = "fixed-clock";
> > + clock-frequency = <250000000>;
> > + #clock-cells = <0>;
> > + };
> > + };
> > +
> > + l4_cache: l4-cache {
> > + /* L4 cache:
> > + * cache-unified, block-size 64B
> > + * 16-way set associative, size 16MB
> > + * shared by the SoC.
> > + */
> > + compatible = "cache";
> > + cache-block-size = <64>;
> > + cache-level = <4>;
> > + cache-size = <0x1000000>;
> > + cache-sets = <0x4000>;
> > + cache-unified;
> > + };
> > +
> > + memory at 80000000 {
> > + device_type = "memory";
> > + reg = <0x00 0x80000000 0x4 0x00000000>;
> > + };
> > +
> > + soc {
> > + compatible = "simple-bus";
> > + ranges;
> > + #address-cells = <0x02>;
> > + #size-cells = <0x02>;
>
> <2> This is not hex and definitely does not need padding with 0.
>
> > +
> > + clint: clint at 8000000 {
> > + compatible = "sifive,clint0", "riscv,clint0";
> > + reg = <0x00 0x8000000 0x00 0x100000>;
> > + interrupts-extended = <&cpu0_intc 0x03>, <&cpu0_intc 0x07>,
> > + <&cpu1_intc 0x03>, <&cpu1_intc 0x07>,
> > + <&cpu2_intc 0x03>, <&cpu2_intc 0x07>,
> > + <&cpu3_intc 0x03>, <&cpu3_intc 0x07>,
> > + <&cpu4_intc 0x03>, <&cpu4_intc 0x07>,
> > + <&cpu5_intc 0x03>, <&cpu5_intc 0x07>,
> > + <&cpu6_intc 0x03>, <&cpu6_intc 0x07>,
> > + <&cpu7_intc 0x03>, <&cpu7_intc 0x07>;
> > + };
> > +
> > + plic: plic at 9000000 {
> > + compatible = "ultrarisc,dp1000-plic", "ultrarisc,cp100-plic";
> > + reg = <0x00 0x9000000 0x00 0x4000000>;
> > + #interrupt-cells = <1>;
> > + #address-cells = <0>;
>
> So hex or not hex? Please fix your DTS so it is consistent.
>
I will clean up the inconsistent hex/decimal formatting across the DTS and
remove the unnecessary padding in the next version.
> > + interrupt-controller;
> > + interrupts-extended = <&cpu0_intc 0xb>, <&cpu0_intc 0x9>, <&cpu0_intc 0xa>,
> > + <&cpu1_intc 0xb>, <&cpu1_intc 0x9>, <&cpu1_intc 0xa>,
> > + <&cpu2_intc 0xb>, <&cpu2_intc 0x9>, <&cpu2_intc 0xa>,
> > + <&cpu3_intc 0xb>, <&cpu3_intc 0x9>, <&cpu3_intc 0xa>,
> > + <&cpu4_intc 0xb>, <&cpu4_intc 0x9>, <&cpu4_intc 0xa>,
> > + <&cpu5_intc 0xb>, <&cpu5_intc 0x9>, <&cpu5_intc 0xa>,
> > + <&cpu6_intc 0xb>, <&cpu6_intc 0x9>, <&cpu6_intc 0xa>,
> > + <&cpu7_intc 0xb>, <&cpu7_intc 0x9>, <&cpu7_intc 0xa>;
> > + riscv,ndev = <160>;
> > + };
> > +
> > + pmx0: pinmux at 11081000 {
> > + compatible = "ultrarisc,dp1000-pinctrl";
> > + reg = <0x0 0x11081000 0x0 0x1000>;
> > + #pinctrl-cells = <2>;
> > + };
> > +
> > + gpio: gpio at 20200000 {
> > + compatible = "snps,dw-apb-gpio";
> > + reg = <0x0 0x20200000 0x0 0x1000>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + clock-names = "bus", "db";
> > + clocks = <&csr_clk>, <&device_clk>;
> > +
> > + gpio_a: gpio-port at 0 {
> > + compatible = "snps,dw-apb-gpio-port";
> > + reg = <0>;
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + snps,nr-gpios = <16>;
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <34>;
> > + gpio-ranges = <&pmx0 0 0 16>;
> > + };
> > +
> > + gpio_b: gpio-port at 1 {
> > + compatible = "snps,dw-apb-gpio-port";
> > + reg = <1>;
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + snps,nr-gpios = <8>;
> > + gpio-ranges = <&pmx0 16 0 8>;
> > + };
> > +
> > + gpio_c: gpio-port at 2 {
> > + compatible = "snps,dw-apb-gpio-port";
> > + reg = <2>;
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + snps,nr-gpios = <8>;
> > + gpio-ranges = <&pmx0 24 0 8>;
> > + };
> > +
> > + gpio_d: gpio-port at 3 {
> > + compatible = "snps,dw-apb-gpio-port";
> > + reg = <3>;
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + snps,nr-gpios = <8>;
> > + gpio-ranges = <&pmx0 32 0 8>;
> > + };
> > + };
> > +
> > + uart0: serial at 20300000 {
> > + compatible = "ultrarisc,dp1000-uart", "snps,dw-apb-uart";
> > + reg = <0x00 0x20300000 0x00 0x10000>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <17>;
> > + clock-frequency = <62500000>;
> > + reg-io-width = <0x04>;
> > + reg-shift = <0x02>;
> > + };
> > +
> > + uart1: serial at 20310000 {
> > + compatible = "ultrarisc,dp1000-uart", "snps,dw-apb-uart";
> > + reg = <0x00 0x20310000 0x00 0x10000>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <18>;
> > + clock-frequency = <62500000>;
> > + reg-io-width = <0x04>;
> > + reg-shift = <0x02>;
> > + };
> > +
> > + uart2: serial at 20400000 {
> > + compatible = "ultrarisc,dp1000-uart", "snps,dw-apb-uart";
> > + reg = <0x00 0x20400000 0x00 0x10000>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <25>;
> > + clock-frequency = <62500000>;
> > + reg-io-width = <0x04>;
> > + reg-shift = <0x02>;
> > + };
> > +
> > + uart3: serial at 20410000 {
> > + compatible = "ultrarisc,dp1000-uart", "snps,dw-apb-uart";
> > + reg = <0x00 0x20410000 0x00 0x10000>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <26>;
> > + clock-frequency = <62500000>;
> > + reg-io-width = <0x04>;
> > + reg-shift = <0x02>;
> > + };
> > +
> > + spi0: spi at 20320000 {
> > + compatible = "snps,dw-apb-ssi";
> > + reg = <0x0 0x20320000 0x0 0x1000>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + clocks = <&device_clk>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <19>;
> > + num-cs = <3>;
> > + };
> > +
> > + spi1: spi at 20420000 {
> > + compatible = "snps,dw-apb-ssi";
> > + reg = <0x0 0x20420000 0x0 0x1000>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + clocks = <&device_clk>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <27>;
> > + num-cs = <3>;
> > + };
> > +
> > + i2c0: i2c at 20330000 {
> > + compatible = "snps,designware-i2c";
> > + reg = <0x0 0x20330000 0x0 0x100>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + clock-frequency = <400000>;
> > + clocks = <&device_clk>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <20>;
> > + };
> > +
> > + i2c1: i2c at 20340000 {
> > + compatible = "snps,designware-i2c";
> > + reg = <0x0 0x20340000 0x0 0x100>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + clock-frequency = <400000>;
> > + clocks = <&device_clk>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <21>;
> > + };
> > +
> > + i2c2: i2c at 20430000 {
> > + compatible = "snps,designware-i2c";
> > + reg = <0x0 0x20430000 0x0 0x100>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + clock-frequency = <400000>;
> > + clocks = <&device_clk>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <28>;
> > + };
> > +
> > + i2c3: i2c at 20440000 {
> > + compatible = "snps,designware-i2c";
> > + reg = <0x0 0x20440000 0x0 0x100>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + clock-frequency = <400000>;
> > + clocks = <&device_clk>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <29>;
> > + };
> > +
> > + pcie_x16: pcie at 21000000 {
> > + compatible = "ultrarisc,dp1000-pcie";
> > + reg = <0x0 0x21000000 0x0 0x01000000>,
> > + <0x0 0x4fff0000 0x0 0x00010000>;
> > + reg-names = "dbi", "config";
> > + ranges = <0x81000000 0x0 0x4fbf0000 0x0 0x4fbf0000 0x0 0x00400000>,
> > + <0x82000000 0x0 0x40000000 0x0 0x40000000 0x0 0x0fbf0000>,
> > + <0xc3000000 0x40 0x00000000 0x40 0x00000000 0xd 0x00000000>;
> > + #address-cells = <3>;
> > + #size-cells = <2>;
> > + #interrupt-cells = <1>;
> > + device_type = "pci";
> > + dma-coherent;
> > + bus-range = <0x0 0xff>;
> > + num-lanes = <16>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <43>, <44>, <45>, <46>, <47>;
> > + interrupt-names = "msi", "inta", "intb", "intc", "intd";
> > + interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> > + interrupt-map = <0x0 0x0 0x0 0x1 &plic 44>,
> > + <0x0 0x0 0x0 0x2 &plic 45>,
> > + <0x0 0x0 0x0 0x3 &plic 46>,
> > + <0x0 0x0 0x0 0x4 &plic 47>;
>
> Why PCIe without any devices is enabled? That's a bus.
>
> Please look how other DTS are written because you created something
> pretty different than entire kernel style.
>
I will review the PCIe node and update it to align with existing DTS
conventions in the next version.
> > + };
> > +
> > + pcie_x4a: pcie at 23000000 {
> > + compatible = "ultrarisc,dp1000-pcie";
> > + reg = <0x0 0x23000000 0x0 0x01000000>,
> > + <0x0 0x6fff0000 0x0 0x00010000>;
> > + reg-names = "dbi", "config";
> > + ranges = <0x81000000 0x0 0x6fbf0000 0x0 0x6fbf0000 0x0 0x00400000>,
> > + <0x82000000 0x0 0x60000000 0x0 0x60000000 0x0 0x0fbf0000>,
> > + <0xc3000000 0x80 0x00000000 0x80 0x00000000 0xd 0x00000000>;
> > + #address-cells = <3>;
> > + #size-cells = <2>;
> > + #interrupt-cells = <1>;
> > + device_type = "pci";
> > + dma-coherent;
> > + bus-range = <0x0 0xff>;
> > + num-lanes = <4>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <63>, <64>, <65>, <66>, <67>;
> > + interrupt-names = "msi", "inta", "intb", "intc", "intd";
> > + interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> > + interrupt-map = <0x0 0x0 0x0 0x1 &plic 64>,
> > + <0x0 0x0 0x0 0x2 &plic 65>,
> > + <0x0 0x0 0x0 0x3 &plic 66>,
> > + <0x0 0x0 0x0 0x4 &plic 67>;
> > + };
> > +
> > + pcie_x4b: pcie at 24000000 {
> > + compatible = "ultrarisc,dp1000-pcie";
> > + reg = <0x0 0x24000000 0x0 0x01000000>,
> > + <0x0 0x7fff0000 0x0 0x00010000>;
> > + reg-names = "dbi", "config";
> > + ranges = <0x81000000 0x0 0x7fbf0000 0x0 0x7fbf0000 0x0 0x00400000>,
> > + <0x82000000 0x0 0x70000000 0x0 0x70000000 0x0 0x0fbf0000>,
> > + <0xc3000000 0xc0 0x00000000 0xc0 0x00000000 0xd 0x00000000>;
> > + #address-cells = <3>;
> > + #size-cells = <2>;
> > + #interrupt-cells = <1>;
> > + device_type = "pci";
> > + dma-coherent;
> > + bus-range = <0x0 0xff>;
> > + num-lanes = <4>;
> > + interrupt-parent = <&plic>;
> > + interrupts = <73>, <74>, <75>, <76>, <77>;
> > + interrupt-names = "msi", "inta", "intb", "intc", "intd";
> > + interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> > + interrupt-map = <0x0 0x0 0x0 0x1 &plic 74>,
> > + <0x0 0x0 0x0 0x2 &plic 75>,
> > + <0x0 0x0 0x0 0x3 &plic 76>,
> > + <0x0 0x0 0x0 0x4 &plic 77>;
> > + };
> > +
> > + ethernet: ethernet at 38000000 {
> > + compatible = "snps,dwmac", "snps,dwmac-5.10a";
> > + reg = <0x00 0x38000000 0x00 0x1000000>;
> > + clocks = <&csr_clk>;
> > + clock-names = "stmmaceth";
> > + interrupt-parent = <&plic>;
> > + interrupts = <84>;
> > + interrupt-names = "macirq";
> > + local-mac-address = [ff ff ff ff ff ff];
>
> Drop. Not a property of the SoC.
>
Will drop it in the next version.
> > + max-speed = <1000>;
> > + phy-mode = "rgmii-id";
> > + snps,txpbl = <8>;
> > + snps,rxpbl = <8>;
>
> I doubt that Ethernet is complete on the SoC - without MAC and all other
> resources. IOW, it is very weird that this is enabled here. Please explain.
>
I will move the PHY configuration to the board DTS and keep only the MAC
controller description in the SoC dtsi in the next version.
> > + };
> > +
> > + dmac: dma-controller at 39000000 {
> > + compatible = "snps,axi-dma-1.01a";
> > + reg = <0x0 0x39000000 0x0 0x400>;
>
> <0x0 here but why in other places is <0x00?
>
> Write consistent code.
>
Will fix to use consistent hex formatting across the DTS. Thanks!
>
>
> Best regards,
> Krzysztof
>
Best regards,
Jia Wang
More information about the linux-riscv
mailing list