[PATCH 1/1] riscv: dts: spacemit: enable PMIC on OrangePi R2S

[Chukun Pan]

Enable the i2c8 interface and add the connected SpacemiT P1 PMIC and
its associated regulators to support voltage regulation on the board.

Signed-off-by: Chukun Pan <amadeus at jmu.edu.cn>
---
 .../boot/dts/spacemit/k1-orangepi-r2s.dts     | 134 ++++++++++++++++++
 1 file changed, 134 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts b/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts
index 1ecc40749e5a..b13a8d6a2670 100644
--- a/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts
@@ -13,6 +13,7 @@ / {
 	compatible = "xunlong,orangepi-r2s", "spacemit,k1";
 
 	aliases {
+		i2c8 = &i2c8;
 		serial0 = &uart0;
 		ethernet0 = &eth0;
 		ethernet1 = &eth1;
@@ -22,6 +23,15 @@ chosen {
 		stdout-path = "serial0";
 	};
 
+	vcc4v0: regulator-vcc4v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc4v0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <4000000>;
+		regulator-max-microvolt = <4000000>;
+	};
+
 	vcc5v0_usb: regulator-vcc5v0-usb {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -94,6 +104,130 @@ rgmii1: phy at 1 {
 	};
 };
 
+&i2c8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c8_cfg>;
+	status = "okay";
+
+	pmic at 41 {
+		compatible = "spacemit,p1";
+		reg = <0x41>;
+		interrupts = <64>;
+		vin1-supply = <&vcc4v0>;
+		vin2-supply = <&vcc4v0>;
+		vin3-supply = <&vcc4v0>;
+		vin4-supply = <&vcc4v0>;
+		vin5-supply = <&vcc4v0>;
+		vin6-supply = <&vcc4v0>;
+		aldoin-supply = <&vcc4v0>;
+		dldoin1-supply = <&buck5>;
+		dldoin2-supply = <&buck5>;
+
+		regulators {
+			buck1 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3450000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck2 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3450000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck3_1v8: buck3 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck4_3v3: buck4 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck5: buck5 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3450000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck6 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3450000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			aldo1_3v3: aldo1 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+			};
+
+			aldo2 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			aldo3 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			aldo4 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			dldo1 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+			};
+
+			dldo2 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			dldo3 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			dldo4 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-always-on;
+			};
+
+			dldo5 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			dldo6 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-always-on;
+			};
+
+			dldo7 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+		};
+	};
+};
+
 &pdma {
 	status = "okay";
 };
-- 
2.34.1