[PATCH v2 1/1] riscv: dts: spacemit: enable USB3 on OrangePi R2S

[Yixun Lan]

Hi Chukun,

On 18:00 Mon 18 May     , Chukun Pan wrote:
> Enable the DWC3 USB3.0 controller and its associated PHY on the
> OrangePi R2S. The USB regulator provides VBUS for USB2 and USB3
> ports, but the USB2 ports are handled by a separate controller.
> 
> Signed-off-by: Chukun Pan <amadeus at jmu.edu.cn>

Reviewed-by: Yixun Lan <dlan at kernel.org>

> ---
> v2: Remove vin-supply for the vcc5v0_usb regulator.
> ---
>  .../boot/dts/spacemit/k1-orangepi-r2s.dts     | 23 +++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts b/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts
> index de75f6aac740..1ecc40749e5a 100644
> --- a/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts
> +++ b/arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts
> @@ -21,6 +21,19 @@ aliases {
>  	chosen {
>  		stdout-path = "serial0";
>  	};
> +
> +	vcc5v0_usb: regulator-vcc5v0-usb {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpios = <&gpio K1_GPIO(126) GPIO_ACTIVE_HIGH>;
> +		regulator-name = "vcc5v0_usb";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +	};
> +};
> +
> +&combo_phy {
> +	status = "okay";
>  };
>  
>  &emmc {
> @@ -90,3 +103,13 @@ &uart0 {
>  	pinctrl-0 = <&uart0_2_cfg>;
>  	status = "okay";
>  };
> +
> +&usbphy2 {
> +	status = "okay";
> +};
> +
> +&usb_dwc3 {
> +	dr_mode = "host";
> +	vbus-supply = <&vcc5v0_usb>;
> +	status = "okay";
> +};
> -- 
> 2.34.1
> 

-- 
Yixun Lan (dlan)