[PATCH v5 3/3] riscv: dts: spacemit: Add thermal sensor for K1 SoC

[Yixun Lan]

Hi Shuwei,

On 15:15 Mon 27 Apr     , Shuwei Wu wrote:
> Include the Thermal Sensor node in the SpacemiT K1 dtsi
> with definitions for registers, clocks, and interrupts.
> Additionally, configure thermal zones for the soc, package, gpu, and
> clusters to enable temperature monitoring via the thermal framework.
> 
> Tested-by: Vincent Legoll <legoll at online.fr> # OrangePi-RV2
> Tested-by: Gong Shuai <gsh517025 at gmail.com>
> Signed-off-by: Shuwei Wu <shuwei.wu at mailbox.org>
> 
> ---
> Changes in v2:
> - Update compatible to "spacemit,k1-tsensor"
> ---
>  arch/riscv/boot/dts/spacemit/k1.dtsi | 101 +++++++++++++++++++++++++++++++++++
>  1 file changed, 101 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
> index 529ec68e9c23..e9952204224e 100644
> --- a/arch/riscv/boot/dts/spacemit/k1.dtsi
> +++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
> @@ -339,6 +339,96 @@ osc_32k: clock-32k {
>  		};
>  	};
>  
> +	thermal-zones {
> +		soc-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&thermal 0>;
> +
> +			trips {
> +				soc-crit {
> +					temperature = <115000>;
> +					hysteresis = <0>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		package-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&thermal 1>;
> +
> +			trips {
> +				package-crit {
> +					temperature = <115000>;
> +					hysteresis = <0>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		gpu-thermal {
> +			polling-delay-passive = <100>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&thermal 2>;
> +
> +			trips {
> +				gpu-alert {
> +					temperature = <85000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				gpu-crit {
> +					temperature = <115000>;
> +					hysteresis = <0>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cluster0-thermal {
> +			polling-delay-passive = <100>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&thermal 3>;
> +
> +			trips {
> +				cluster0-alert {
> +					temperature = <85000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cluster0-crit {
> +					temperature = <115000>;
> +					hysteresis = <0>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cluster1-thermal {
> +			polling-delay-passive = <100>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&thermal 4>;
> +
> +			trips {
> +				cluster1-alert {
> +					temperature = <85000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cluster1-crit {
> +					temperature = <115000>;
> +					hysteresis = <0>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +	};
> +
>  	soc {
>  		compatible = "simple-bus";
>  		interrupt-parent = <&plic>;
> @@ -494,6 +584,17 @@ syscon_apbc: system-controller at d4015000 {
>  			#reset-cells = <1>;
>  		};
>  
> +		thermal: thermal at d4018000 {
> +			compatible = "spacemit,k1-tsensor";
> +			reg = <0x0 0xd4018000 0x0 0x100>;
> +			clocks = <&syscon_apbc CLK_TSEN>,
> +				 <&syscon_apbc CLK_TSEN_BUS>;
> +			clock-names = "core", "bus";
> +			interrupts = <61>;
> +			resets = <&syscon_apbc RESET_TSEN>;
> +			#thermal-sensor-cells = <1>;
> +		};
Ok, so if I understand correctly the thermal is a SoC feature, so with
above it will be enabled by default for all boards, but for the convention
we usually disable it in dtsi file, and enable it at board dts level

Please convince me doing above is better? as I'm not sure if there is
cases that user want it disabled (but could possible)..

-- 
Yixun Lan (dlan)