[PATCH v2 20/22] dt-bindings: pinctrl: Add starfive,jhb100-per3-pinctrl
Rob Herring (Arm)
robh at kernel.org
Thu May 14 06:17:38 PDT 2026
On Thu, 14 May 2026 04:12:16 -0700, Changhuang Liang wrote:
> Add pinctrl bindings for StarFive JHB100 SoC Peripheral-3(per3) pinctrl
> controller.
>
> Signed-off-by: Changhuang Liang <changhuang.liang at starfivetech.com>
> ---
> .../pinctrl/starfive,jhb100-per3-pinctrl.yaml | 173 ++++++++++++++++++
> .../pinctrl/starfive,jhb100-pinctrl.h | 14 ++
> 2 files changed, 187 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per3-pinctrl.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
./Documentation/devicetree/bindings/pinctrl/starfive,jhb100-sys2-pinctrl.yaml:135:14: [warning] wrong indentation: expected 12 but found 13 (indentation)
./Documentation/devicetree/bindings/pinctrl/starfive,jhb100-sys1-pinctrl.yaml:136:14: [warning] wrong indentation: expected 12 but found 13 (indentation)
./Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per2pok-pinctrl.yaml:134:14: [warning] wrong indentation: expected 12 but found 13 (indentation)
./Documentation/devicetree/bindings/pinctrl/starfive,jhb100-sys0h-pinctrl.yaml:136:14: [warning] wrong indentation: expected 12 but found 13 (indentation)
./Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per2-pinctrl.yaml:136:14: [warning] wrong indentation: expected 12 but found 13 (indentation)
./Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per0-pinctrl.yaml:136:14: [warning] wrong indentation: expected 12 but found 13 (indentation)
./Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per3-pinctrl.yaml:134:14: [warning] wrong indentation: expected 12 but found 13 (indentation)
./Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per1-pinctrl.yaml:135:14: [warning] wrong indentation: expected 12 but found 13 (indentation)
./Documentation/devicetree/bindings/pinctrl/starfive,jhb100-sys0-pinctrl.yaml:136:14: [warning] wrong indentation: expected 12 but found 13 (indentation)
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/toshiba,tc9563.example.dtb: pcie at 0,0 (pci1179,0623): i2c-parent: [[4294967295, 119]] is too short
from schema $id: http://devicetree.org/schemas/pci/toshiba,tc9563.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.example.dtb: i2c-mux3 (i2c-demux-pinctrl): i2c-parent:0: [2, 3, 4] is too long
from schema $id: http://devicetree.org/schemas/i2c/i2c-demux-pinctrl.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/renesas,ether.example.dtb: ethernet-phy at 1 (ethernet-phy-id0022.1537): compatible: ['ethernet-phy-id0022.1537', 'ethernet-phy-ieee802.3-c22'] is too long
from schema $id: http://devicetree.org/schemas/net/micrel.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/starfive,jhb100-sys0-pinctrl.example.dtb: pinctrl at 13080000 (starfive,jhb100-sys0-pinctrl): gpio-ranges:1: [4] is too short
from schema $id: http://devicetree.org/schemas/gpio/gpio.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.example.dtb: dwc3 at 2680000 (ti,keystone-dwc3): usb at 2690000:usb-phy:0: [4294967295, 4294967295] is too long
from schema $id: http://devicetree.org/schemas/usb/ti,keystone-dwc3.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.example.dtb: dwc3 at 2680000 (ti,keystone-dwc3): usb at 2690000: Unevaluated properties are not allowed ('usb-phy' was unexpected)
from schema $id: http://devicetree.org/schemas/usb/ti,keystone-dwc3.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.example.dtb: usb at 2690000 (snps,dwc3): usb-phy:0: [4294967295, 4294967295] is too long
from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.example.dtb: usb at 2690000 (snps,dwc3): Unevaluated properties are not allowed ('usb-phy' was unexpected)
from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/snps,dwc3.example.dtb: usb at 4a030000 (snps,dwc3): usb-phy:0: [4294967295, 4294967295] is too long
from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/snps,dwc3.example.dtb: usb at 4a030000 (snps,dwc3): Unevaluated properties are not allowed ('snps,incr-burst-type-adjustment', 'usb-phy' were unexpected)
from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/usb-drd.example.dtb: usb at 4a030000 (snps,dwc3): usb-phy:0: [4294967295, 4294967295] is too long
from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/usb-drd.example.dtb: usb at 4a030000 (snps,dwc3): Unevaluated properties are not allowed ('adp-disable', 'dr_mode', 'maximum-speed', 'otg-rev', 'phy_type', 'usb-phy' were unexpected)
from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/starfive,jhb100-sys2-pinctrl.example.dtb: pinctrl at 13082000 (starfive,jhb100-sys2-pinctrl): gpio-ranges:2: [32, 5] is too short
from schema $id: http://devicetree.org/schemas/gpio/gpio.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/starfive,jhb100-sys1-pinctrl.example.dtb: pinctrl at 13081000 (starfive,jhb100-sys1-pinctrl): gpio-ranges:1: [8] is too short
from schema $id: http://devicetree.org/schemas/gpio/gpio.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per2pok-pinctrl.example.dtb: pinctrl at 11bc2400 (starfive,jhb100-per2pok-pinctrl): gpio-ranges:1: [18] is too short
from schema $id: http://devicetree.org/schemas/gpio/gpio.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/starfive,jhb100-sys0h-pinctrl.example.dtb: pinctrl at 13080800 (starfive,jhb100-sys0h-pinctrl): gpio-ranges:1: [12] is too short
from schema $id: http://devicetree.org/schemas/gpio/gpio.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per2-pinctrl.example.dtb: pinctrl at 11bc2000 (starfive,jhb100-per2-pinctrl): gpio-ranges:1: [31] is too short
from schema $id: http://devicetree.org/schemas/gpio/gpio.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per3-pinctrl.example.dtb: pinctrl at 11c42000 (starfive,jhb100-per3-pinctrl): gpio-ranges:1: [11] is too short
from schema $id: http://devicetree.org/schemas/gpio/gpio.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per0-pinctrl.example.dtb: pinctrl at 11a0a000 (starfive,jhb100-per0-pinctrl): gpio-ranges:2: [32, 28] is too short
from schema $id: http://devicetree.org/schemas/gpio/gpio.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per1-pinctrl.example.dtb: pinctrl at 11b42000 (starfive,jhb100-per1-pinctrl): gpio-ranges:2: [32, 4] is too short
from schema $id: http://devicetree.org/schemas/gpio/gpio.yaml
doc reference errors (make refcheckdocs):
See https://patchwork.kernel.org/project/devicetree/patch/20260514111218.94519-21-changhuang.liang@starfivetech.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
More information about the linux-riscv
mailing list