[PATCH v2 18/22] dt-bindings: pinctrl: Add starfive,jhb100-per2pok-pinctrl

[Rob Herring (Arm)]

On Thu, 14 May 2026 04:12:14 -0700, Changhuang Liang wrote:
> Add pinctrl bindings for StarFive JHB100 SoC Peripheral-2 Power OK
> (per2pok) pinctrl controller.
> 
> Signed-off-by: Changhuang Liang <changhuang.liang at starfivetech.com>
> ---
>  .../starfive,jhb100-per2pok-pinctrl.yaml      | 173 ++++++++++++++++++
>  .../pinctrl/starfive,jhb100-pinctrl.h         |  20 ++
>  2 files changed, 193 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per2pok-pinctrl.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per2pok-pinctrl.yaml:134:14: [warning] wrong indentation: expected 12 but found 13 (indentation)
./Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per2-pinctrl.yaml:136:14: [warning] wrong indentation: expected 12 but found 13 (indentation)

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per2-pinctrl.example.dtb: pinctrl at 11bc2000 (starfive,jhb100-per2-pinctrl): gpio-ranges:1: [31] is too short
	from schema $id: http://devicetree.org/schemas/gpio/gpio.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/starfive,jhb100-per2pok-pinctrl.example.dtb: pinctrl at 11bc2400 (starfive,jhb100-per2pok-pinctrl): gpio-ranges:1: [18] is too short
	from schema $id: http://devicetree.org/schemas/gpio/gpio.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.kernel.org/project/devicetree/patch/20260514111218.94519-19-changhuang.liang@starfivetech.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.