[PATCH v2 5/6] riscv: dts: spacemit: k1-musepi-pro: enable PCIe ports

[Yixun Lan]

Hi Andre,

On 13:11 Mon 11 May     , Andre Heider wrote:
> Enable the two PCIe controller along with and their associated PHYs. They
> are routed to the M.2 M-key connector and to the PCIe slot.
> 
> Signed-off-by: Andre Heider <a.heider at gmail.com>
> ---
>  .../riscv/boot/dts/spacemit/k1-musepi-pro.dts | 50 +++++++++++++++++++
>  1 file changed, 50 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
> index 9c90c2817ecb7..2d3e30f0bd806 100644
> --- a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
> +++ b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
> @@ -36,6 +36,24 @@ led1 {
>  		};
>  	};
>  
> +	pcie_vcc_3v3: regulator-pcie-vcc3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "PCIE_VCC3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-always-on;
> +		vin-supply = <&reg_usb_vbus>;
> +	};
> +
> +	mpcie_vcc_3v3: regulator-mpcie-vcc3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "MPCIE_VCC3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-always-on;
> +		vin-supply = <&reg_usb_vbus>;
> +	};
> +
>  	reg_usb_vbus: regulator-usb-vbus {
>  		compatible = "regulator-fixed";
>  		regulator-name = "USBVBUS";
> @@ -275,6 +293,38 @@ dldo7 {
>  	};
>  };
>  
> +&pcie1_phy {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie1_3_cfg>;
> +	status = "okay";
> +};
> +
> +&pcie1_port {
> +	phys = <&pcie1_phy>;
> +	vpcie3v3-supply = <&pcie_vcc_3v3>;
> +};
> +
> +&pcie1 {
..
> +	vpcie3v3-supply = <&pcie_vcc_3v3>;
drop vpcie3v3-supply which not needed

> +	status = "okay";
> +};
> +
> +&pcie2_phy {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie2_4_cfg>;
> +	status = "okay";
> +};
> +
> +&pcie2_port {
> +	phys = <&pcie2_phy>;
> +	vpcie3v3-supply = <&mpcie_vcc_3v3>;
> +};
> +
> +&pcie2 {
> +	vpcie3v3-supply = <&mpcie_vcc_3v3>;
same here
> +	status = "okay";
> +};
> +
>  &qspi {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&qspi_cfg>;
> -- 
> 2.53.0
> 

-- 
Yixun Lan (dlan)