[PATCH v2 17/22] dt-bindings: clock: Add StarFive JHB100 Peripheral-2 clock and reset generator

[Rob Herring (Arm)]

On Thu, 07 May 2026 22:36:27 -0700, Changhuang Liang wrote:
> Add bindings for the Peripheral-2 clock and reset generator (PER2CRG)
> on the JHB100 RISC-V SoC by StarFive Ltd.
> 
> Signed-off-by: Changhuang Liang <changhuang.liang at starfivetech.com>
> ---
>  .../clock/starfive,jhb100-per2crg.yaml        | 76 +++++++++++++++++++
>  .../dt-bindings/clock/starfive,jhb100-crg.h   | 57 ++++++++++++++
>  .../dt-bindings/reset/starfive,jhb100-crg.h   | 17 +++++
>  3 files changed, 150 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/starfive,jhb100-per2crg.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/renesas,ether.example.dtb: ethernet-phy at 1 (ethernet-phy-id0022.1537): compatible: ['ethernet-phy-id0022.1537', 'ethernet-phy-ieee802.3-c22'] is too long
	from schema $id: http://devicetree.org/schemas/net/micrel.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.kernel.org/project/devicetree/patch/20260508053632.818548-18-changhuang.liang@starfivetech.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.