[PATCH v5 0/4] dmaengine: Add Peripheral DMA support for SpacemiT K3 SoC

[Troy Mitchell]

Hi all,

This patch series introduces Peripheral DMA (PDMA) support for the
SpacemiT K3 SoC, leveraging the existing mmp_pdma driver.

The K3 PDMA IP is largely based on the design found in the previous
SpacemiT K1 SoC, but introduces a few key architectural differences:
1. It features a variable extended DRCMR base address for DMA request
   numbers (>= 64) depending on the hardware implementation.
2. Unlike the K1 SoC, where some DMA masters had memory addressing
   limitations (requiring a dedicated dma-bus), the K3 DMA masters
   have full memory addressing capabilities.

The series is structured as follows:
- Patch 1: Introduce the necessary dt-bindings: K3 compatible string.
- Patch 2-3: Refactor the mmp_pdma driver to support variable extended
  DRCMR bases, and add the specific implementation/ops for the K3 SoC.
- Patch 4: Fixes a critical clock issue where the DDR bus clock
  (top_dclk) could be gated by CCF, which would cause DMA engines to
  hang and lead to system instability.
- Patch 5: Finally, instantiates the PDMA controller node in the
  SpacemiT K3 device tree.

---
Changes in v5:
- drop patch 4/5 (has been merged)
- add Conor's tag
- Link to v4: https://lore.kernel.org/all/20260424-k3-pdma-v3-0-efdf2e414a08@linux.spacemit.com/

Changes in v4:
- patch 4/5:
  - add Brian's RB tag
- patch 1/5:
  - update commit message
Link to v3: https://lore.kernel.org/all/20260331-k3-pdma-v3-0-a4e60dd8b4b3@linux.spacemit.com/

Changes in v3:
- Removed the dt-bindings patches related to the DMA number.
- patch 1/5:
  - update commit message
- patch 2-5: nothing
- Link to v2: https://lore.kernel.org/r/20260326-k3-pdma-v2-0-ca94ca7bb595@linux.spacemit.com

Changes in v2:
- patch 1-6 are added in this version
- patch 7/7
  - update commit message
  - using k3 compatible string
  - Link to v1: https://lore.kernel.org/all/20260317-k3-pdma-v1-1-f39d3e97b53a@linux.spacemit.com/

To: Vinod Koul <vkoul at kernel.org>
To: Frank Li <Frank.Li at kernel.org>
To: Rob Herring <robh at kernel.org>
To: Krzysztof Kozlowski <krzk+dt at kernel.org>
To: Conor Dooley <conor+dt at kernel.org>
To: Yixun Lan <dlan at kernel.org>
To: Guodong Xu <guodong at riscstar.com>
To: Paul Walmsley <pjw at kernel.org>
To: Palmer Dabbelt <palmer at dabbelt.com>
To: Albert Ou <aou at eecs.berkeley.edu>
To: Alexandre Ghiti <alex at ghiti.fr>
Cc: dmaengine at vger.kernel.org
Cc: devicetree at vger.kernel.org
Cc: linux-riscv at lists.infradead.org
Cc: spacemit at lists.linux.dev
Cc: linux-kernel at vger.kernel.org

---
Guodong Xu (3):
      dt-bindings: dmaengine: Add SpacemiT K3 DMA compatible string
      dmaengine: mmp_pdma: support variable extended DRCMR base
      dmaengine: mmp_pdma: add Spacemit K3 support

Troy Mitchell (1):
      riscv: dts: spacemit: Add PDMA controller node for K3 SoC

 .../devicetree/bindings/dma/spacemit,k1-pdma.yaml  |  4 ++-
 arch/riscv/boot/dts/spacemit/k3.dtsi               | 11 +++++++
 drivers/dma/mmp_pdma.c                             | 37 ++++++++++++++++++++--
 3 files changed, 48 insertions(+), 4 deletions(-)
---
base-commit: 02f90981a67f3b9ee7d6684e7503a4fed7aade0c
change-id: 20260317-k3-pdma-7c1734431436

Best regards,
--  
Troy Mitchell <troy.mitchell at linux.spacemit.com>