[PATCH v2 0/4] Initial device tree support for StarFive JHB100 SoC

[Changhuang Liang]

StarFive JHB100 SoC consists of 4 RISC-V low power Cores (Dubhe-70). It
also features various interfaces such as I2C, SPI, CAN, USB, MMC, Uart,
etc.

This patch series introduces initial SoC DTSI support for the StarFive
JHB100 SoC. The relevant dt-binding documentation has been updated
accordingly. Below is the list of IP blocks added in the initial SoC DTSI.

- StarFive Dubhe-70 CPU
- PMU
- PLIC
- CLINT
- UART
- INTC

changes since v1:
patch 2
- Remove from the current series, as it has already been applied.

patch 3:
- Add Conor's Acked-by tag.

patch 5:
- Change jhb100-evb1.dtsi to jhb100-evb1.dts.
- Change "Maintained" to "Supported".
- Add intc node to handle the interrupt of UART.
- Update fixed-clock node name.
- Move reg after compatible.

v1: https://lore.kernel.org/all/20260402084019.440708-1-changhuang.liang@starfivetech.com/

Ji Sheng Teoh (1):
  dt-bindings: riscv: Add StarFive Dubhe-70 compatibles

Ley Foon Tan (3):
  dt-bindings: interrupt-controller: Add StarFive JHB100 plic
  dt-bindings: riscv: Add StarFive JHB100 SoC
  riscv: dts: starfive: jhb100: Add JHB100 base DT

 .../sifive,plic-1.0.0.yaml                    |   1 +
 .../devicetree/bindings/riscv/cpus.yaml       |   1 +
 .../devicetree/bindings/riscv/starfive.yaml   |   5 +
 MAINTAINERS                                   |   6 +
 arch/riscv/boot/dts/starfive/Makefile         |   2 +
 arch/riscv/boot/dts/starfive/jhb100-evb1.dts  |  32 ++
 arch/riscv/boot/dts/starfive/jhb100.dtsi      | 337 ++++++++++++++++++
 7 files changed, 384 insertions(+)
 create mode 100644 arch/riscv/boot/dts/starfive/jhb100-evb1.dts
 create mode 100644 arch/riscv/boot/dts/starfive/jhb100.dtsi


base-commit: 4cd074ae20bbcc293bbbce9163abe99d68ae6ae0
--
2.25.1