[PATCH net] net: stmmac: dwmac-spacemit: Fix wrong ctrl register definition

[Maxime Chevallier]

Hi Inochi,

On 6/18/26 08:41, Inochi Amaoto wrote:
> There register layout of the phy ctrl register has something wrong,
> fix it to match the right layout
> 
> Fixes: 30f0ba420ed3 ("net: stmmac: Add glue layer for Spacemit K3 SoC")
> Signed-off-by: Inochi Amaoto <inochiama at gmail.com>
> ---
>  .../net/ethernet/stmicro/stmmac/dwmac-spacemit.c    | 13 ++++++++-----
>  1 file changed, 8 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c
> index 223754cc5c79..6feffaa3ef3a 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c
> @@ -18,10 +18,12 @@
>  #include "stmmac_platform.h"
>  
>  /* ctrl register bits */
> -#define CTRL_PHY_INTF_RGMII		BIT(3)
> -#define CTRL_PHY_INTF_MII		BIT(4)
> -#define CTRL_WAKE_IRQ_EN		BIT(9)
> -#define CTRL_PHY_IRQ_EN			BIT(12)
> +#define CTRL_PHY_INTF_MODE		GENMASK(4, 3)
> +#define CTRL_PHY_INTF_RMII		FIELD_PREP(CTRL_PHY_INTF_MODE, 0)
> +#define CTRL_PHY_INTF_RGMII		FIELD_PREP(CTRL_PHY_INTF_MODE, 1)
> +#define CTRL_PHY_INTF_MII		FIELD_PREP(CTRL_PHY_INTF_MODE, 3)
> +#define CTRL_PHY_IRQ_EN			BIT(9)
> +#define CTRL_WAKE_IRQ_EN		BIT(12)

Looks like you're fixing 2 things there :

 -> Wake on Lan probably didn't work before, as the wake irq was apparently wrong
 -> The MII mode selection apparently also changes, but maybe you don't have a
    MII board around to test this ?

Is it possible you address these issues independently (i.e. split this in 2 patches) ?
That way, if we ever revert one, we won't re-break the other thing that was broken.


Maxime