[PATCH v3] riscv: dts: spacemit: Use symbolic PDMA request numbers on K1

[Yixun Lan]

Hi Guodong,
 The patch itself looks good to me, only few minor comments

On 09:17 Thu 11 Jun     , Guodong Xu wrote:
> Add a local DTS header, k1-pdma.h, that gives symbolic names to the K1
> PDMA request numbers. These request numbers are hardware-fixed; their
> allocation can be found in K1 manual.
> 
..
> Replace the hard-coded numbers in the SPI3 "dmas" property with the
> K1_PDMA_SPI3_RX/TX macros.
> 
As it's too obvious that people can tell from the diff, then I feel it's
unnecessary to repeat in commit message..

> Signed-off-by: Guodong Xu <docular.xu at gmail.com>
> ---
> Add a local DTS header naming the K1 PDMA request lines and convert the
> current user (the K1 SPI3 node) to the new K1_PDMA_* macros.
..
> The request
> numbers come from the SpacemiT K1 User Manual [1], Chapter 9.4.3 DMA
> Connectivity & Assignments.
> 
I'd suggest to put above into commit message, as more detailed description.
Here is my attempt to slightly reconstruct the commit message:

The PDMA request numbers (DRQ) are fixed values specific to the SoC from a
hardware perspective. The detailed definition can be found in K1 User Manual,
Chapter 9.4.3 DMA Connectivity & Assignments. Add a DTS header file to define
the symbolic names for the DRQs of non-secure DMA peripherals.

> [1]: https://www.spacemit.com/community/document/info?lang=en&nodepath=hardware/key_stone/k1/k1_docs/k1_usermanual/9.Top_System.md
> 
> Changes in v3:
> - Move the request-number macros from include/dt-bindings/dma/ to a local
>   DTS header arch/riscv/boot/dts/spacemit/k1-pdma.h (Conor).
> - Squash the header and its user into a single patch.
> - Link to v2: https://patch.msgid.link/20260609-b4-k1-pdma-req-macros-v2-0-5d5d7b997b54@gmail.com
> 
> Changes in v2:
> - Drop the #dma-cells description change in spacemit,k1-pdma.yaml; the request
>   numbers are hardware-fixed and unused by the driver (Conor)
> - Link to v1: https://patch.msgid.link/20260607-b4-k1-pdma-req-macros-v1-0-5b2a3955007c@gmail.com
> 
> BR,
> Guodong Xu
> ---
>  arch/riscv/boot/dts/spacemit/k1-pdma.h | 56 ++++++++++++++++++++++++++++++++++
>  arch/riscv/boot/dts/spacemit/k1.dtsi   |  4 ++-
>  2 files changed, 59 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/riscv/boot/dts/spacemit/k1-pdma.h b/arch/riscv/boot/dts/spacemit/k1-pdma.h
> new file mode 100644
> index 0000000000000..65112d5847add
> --- /dev/null
> +++ b/arch/riscv/boot/dts/spacemit/k1-pdma.h
> @@ -0,0 +1,56 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> +/*
> + * This header provides DMA request number for non-secure peripherals of
> + * SpacemiT K1 PDMA.
slightly less redundant,
  DMA request number (DRQ) defintion for non-secure peripherals

> + *
> + * Copyright (c) 2026 Guodong Xu <docular.xu at gmail.com>
> + */
> +
> +#ifndef _DTS_SPACEMIT_K1_PDMA_H
> +#define _DTS_SPACEMIT_K1_PDMA_H
> +
> +#define K1_PDMA_UART0_TX	3
> +#define K1_PDMA_UART0_RX	4
> +#define K1_PDMA_UART2_TX	5
> +#define K1_PDMA_UART2_RX	6
> +#define K1_PDMA_UART3_TX	7
> +#define K1_PDMA_UART3_RX	8
> +#define K1_PDMA_UART4_TX	9
> +#define K1_PDMA_UART4_RX	10
> +#define K1_PDMA_I2C0_TX		11
> +#define K1_PDMA_I2C0_RX		12
> +#define K1_PDMA_I2C1_TX		13
> +#define K1_PDMA_I2C1_RX		14
> +#define K1_PDMA_I2C2_TX		15
> +#define K1_PDMA_I2C2_RX		16
> +#define K1_PDMA_I2C4_TX		17
> +#define K1_PDMA_I2C4_RX		18
> +#define K1_PDMA_SPI3_TX		19
> +#define K1_PDMA_SPI3_RX		20
> +#define K1_PDMA_I2S0_TX		21
> +#define K1_PDMA_I2S0_RX		22
> +#define K1_PDMA_I2S1_TX		23
> +#define K1_PDMA_I2S1_RX		24
> +#define K1_PDMA_UART5_TX	25
> +#define K1_PDMA_UART5_RX	26
> +#define K1_PDMA_UART6_TX	27
> +#define K1_PDMA_UART6_RX	28
> +#define K1_PDMA_UART7_TX	29
> +#define K1_PDMA_UART7_RX	30
> +#define K1_PDMA_UART8_TX	31
> +#define K1_PDMA_UART8_RX	32
> +#define K1_PDMA_UART9_TX	33
> +#define K1_PDMA_UART9_RX	34
> +#define K1_PDMA_I2C5_TX		35
> +#define K1_PDMA_I2C5_RX		36
> +#define K1_PDMA_I2C6_TX		37
> +#define K1_PDMA_I2C6_RX		38
> +#define K1_PDMA_I2C7_TX		39
> +#define K1_PDMA_I2C7_RX		40
> +#define K1_PDMA_I2C8_TX		41
> +#define K1_PDMA_I2C8_RX		42
> +#define K1_PDMA_CAN0_RX		43
> +#define K1_PDMA_QSPI_RX		44
> +#define K1_PDMA_QSPI_TX		45
> +
> +#endif /* _DTS_SPACEMIT_K1_PDMA_H */
> diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
> index 08a0f28d011fe..7d414e15d2cc2 100644
> --- a/arch/riscv/boot/dts/spacemit/k1.dtsi
> +++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
> @@ -6,6 +6,8 @@
>  #include <dt-bindings/clock/spacemit,k1-syscon.h>
>  #include <dt-bindings/phy/phy.h>
>  
> +#include "k1-pdma.h"
> +
>  /dts-v1/;
>  / {
>  	#address-cells = <2>;
> @@ -1094,7 +1096,7 @@ spi3: spi at d401c000 {
>  				clock-names = "core", "bus";
>  				resets = <&syscon_apbc RESET_SSP3>;
>  				interrupts = <55>;
> -				dmas = <&pdma 20>, <&pdma 19>;
> +				dmas = <&pdma K1_PDMA_SPI3_RX>, <&pdma K1_PDMA_SPI3_TX>;
>  				dma-names = "rx", "tx";
>  				status = "disabled";
>  			};
> 
> ---
> base-commit: 793cc54475b49b5b558902b5c13e4bfe66530a50
> change-id: 20260607-b4-k1-pdma-req-macros-8d276d0126df
> 
> Best regards,
> --  
> Guodong Xu <docular.xu at gmail.com>
> 

-- 
Yixun Lan (dlan)