[PATCH] riscv: dts: spacemit: k1-musepi-pro: add cpu scaling

[Andre Heider]

Enable CPU DVFS by including the OPP table and wiring the CPU nodes to the
CPU regulator supply.

Signed-off-by: Andre Heider <a.heider at gmail.com>
---
 .../riscv/boot/dts/spacemit/k1-musepi-pro.dts | 35 ++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
index 0d809e4ad3b1..1b425011f123 100644
--- a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
@@ -9,6 +9,7 @@
 
 #include "k1.dtsi"
 #include "k1-pinctrl.dtsi"
+#include "k1-opp.dtsi"
 
 / {
 	model = "SpacemiT MusePi Pro";
@@ -99,6 +100,38 @@ &combo_phy {
 	status = "okay";
 };
 
+&cpu_0 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_1 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_2 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_3 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_4 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_5 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_6 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_7 {
+	cpu-supply = <&buck1_0v9>;
+};
+
 &eth0 {
 	phy-handle = <&rgmii0>;
 	phy-mode = "rgmii-id";
@@ -178,7 +211,7 @@ pmic at 41 {
 		dldoin2-supply = <&buck5>;
 
 		regulators {
-			buck1 {
+			buck1_0v9: buck1 {
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <3450000>;
 				regulator-ramp-delay = <5000>;
-- 
2.53.0