[PATCH v3 18/21] pinctrl: starfive: Add StarFive JHB100 per2pok controller driver

[Bartosz Golaszewski]

On Wed, 3 Jun 2026 07:53:44 +0200, Changhuang Liang
<changhuang.liang at starfivetech.com> said:
> Add pinctrl driver for StarFive JHB100 SoC Peripheral-2 Power OK
> (per2pok) pinctrl controller.
>
> Co-developed-by: Lianfeng Ouyang <lianfeng.ouyang at starfivetech.com>
> Signed-off-by: Lianfeng Ouyang <lianfeng.ouyang at starfivetech.com>
> Signed-off-by: Changhuang Liang <changhuang.liang at starfivetech.com>
> ---
>  drivers/pinctrl/starfive/Kconfig              | 12 +++
>  drivers/pinctrl/starfive/Makefile             |  1 +
>  .../pinctrl-starfive-jhb100-per2pok.c         | 97 +++++++++++++++++++
>  3 files changed, 110 insertions(+)
>  create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jhb100-per2pok.c
>
> diff --git a/drivers/pinctrl/starfive/Kconfig b/drivers/pinctrl/starfive/Kconfig
> index edc3b6d9c8d7..bf5915e0a5f2 100644
> --- a/drivers/pinctrl/starfive/Kconfig
> +++ b/drivers/pinctrl/starfive/Kconfig
> @@ -91,6 +91,18 @@ config PINCTRL_STARFIVE_JHB100_PER2
>  	  peripherals supporting inputs, outputs, configuring pull-up/pull-down
>  	  and interrupts on input changes.
>
> +config PINCTRL_STARFIVE_JHB100_PER2POK
> +	tristate "StarFive JHB100 SoC Peripheral-2 Power OK pinctrl and GPIO driver"
> +	depends on ARCH_STARFIVE || COMPILE_TEST
> +	depends on OF

I don't see any real dependency on CONFIG_OF here, am I missing something? The
OF ID matching is available even with !CONFIG_OF.

Same elsewhere.

Bart