[PATCH v3 1/2] dt-bindings: gpu: img,powervr-rogue: add spacemit,k3-gpu

[Baihui Liang]

On Wed Jul 29, 2026 at 3:57 PM CST, Krzysztof Kozlowski wrote:
> On 29/07/2026 09:46, Baihui Liang wrote:
> > On Tue, Jul 28, 2026, Krzysztof Kozlowski wrote:
> > > > [...]
> > > > spacemit,k3-gpu is added to the existing ti,am62-gpu/ti,am62p-gpu/
> > > > ti,j721s2-gpu "if" block that restricts clocks to a single entry,
> > > > since K3 has the same single-clock requirement. It does not match any
> > > > "if" block that constrains power-domains, so that property falls back
> > >
> > > I don't get this explanation. Are you explaining what the patch is doing
> > > or explaining WHY you did this that way?
> > 
> > 
> > That paragraph was describing schema mechanics, which does not belong in
> > a commit message. v4 will drop it and state only the hardware facts: the
> > K3 integration of the BXM-4-64 has a single "core" clock, and it has no
> > software-controllable GPU power domain.
> > 
> > 
> > > > to this schema's general constraints, where it is optional. This
> > > > leaves room for a power-domains provider to be added later without a
> > > > further binding change, should one ever be modelled in Linux for this
> > > > SoC.
> > >
> > > No, you need to provide constraints now. Please read carefully
> > > writing-bindings.
> > 
> > 
> > Understood. spacemit,k3-gpu currently matches no power-domains "if"
> > block, so it falls back to the top-level 1-2 domains with
> > power-domain-names "a"/"b". That would let a K3 DT with two power
> > domains pass validation, which does not describe this hardware. v4 will
> > add an explicit "if" block:
> > 
> > 
> >     - if:
> >         properties:
> >           compatible:
> >             contains:
> >               const: spacemit,k3-gpu
> >       then:
> >         properties:
> >           power-domains: false
> >           power-domain-names: false
>
> I understand only half of this. Please fix your email client.
>
> And why this reply misses reply-to header which connects it to proper
> thread? How am I supposed to find the thread now, among 200 I received
> yesterday?

Sorry -- that went out through a webmail client which sent HTML, so the
quoting and the YAML indentation were destroyed, and it composed a new
message instead of replying in place, which is why it lost the thread.
I have switched to git send-email over our own SMTP; this reply should
be plain text and properly threaded.

> So your name is presented here as "Baihui Liang" then why do you use
> some fake company name?

liangbaihui at linux.spacemit.com is my real work address at SpacemiT. It is
now sent through the company's own mail server.

> Best regards,
> Krzysztof