[PATCH 2/2] riscv: dts: spacemit: Make dtschema recognize the etherent PHY correctly on K3 com260 board

[Inochi Amaoto]

Since the previous commit does not change the phy node name,
the dtschema can not recognize the type of the ethernet phy,
so the following error is produced:

/arch/riscv/boot/dts/spacemit/k3-com260-ifx.dtb: phy at 1 (ethernet-phy-id001c.c916): $nodename:0: 'phy at 1' does not match '^ethernet-phy(@[a-f0-9]+)?$'
        from schema $id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml
/arch/riscv/boot/dts/spacemit/k3-com260-ifx.dtb: phy at 1 (ethernet-phy-id001c.c916): Unevaluated properties are not allowed ('reg', 'reset-assert-us', '
reset-deassert-us', 'reset-gpios' were unexpected)
        from schema $id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml

Change the nodename to make the dtschema can recognize the right
PHY type.

Fixes: 9db839d52ccd ("riscv: dts: spacemit: Fix phy id check for the phy on com260 board")
Signed-off-by: Inochi Amaoto <inochiama at gmail.com>
---
 arch/riscv/boot/dts/spacemit/k3-com260.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/boot/dts/spacemit/k3-com260.dtsi b/arch/riscv/boot/dts/spacemit/k3-com260.dtsi
index 2a07cd8f2a56..c7a04a338d08 100644
--- a/arch/riscv/boot/dts/spacemit/k3-com260.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k3-com260.dtsi
@@ -173,7 +173,7 @@ &eth1 {
 	status = "okay";
 
 	mdio {
-		phy1: phy at 1 {
+		phy1: ethernet-phy at 1 {
 			compatible = "ethernet-phy-id001c.c916";
 			reg = <1>;
 			reset-gpios = <&gpio 1 5 GPIO_ACTIVE_LOW>;
-- 
2.55.0