[PATCH v2 1/2] PCI: Move Spacemit vendor and device IDs to linux/pci_ids.h

[Anirudh Srinivasan]

Move the vendor and device ID for the existing Spacemit K1 PCIe Root
Complex to include/linux/pci_ids.h. Also add K3's Root Complex device ID
to this header. This is done so that these values can be referenced in
the rtw89 driver to enable 36-bit DMA ability in it for WiFi to function
on the K3 Pico ITX board.

Acked-by: Bjorn Helgaas <bhelgaas at google.com>
Signed-off-by: Anirudh Srinivasan <asrinivasan at oss.tenstorrent.com>
---
 drivers/pci/controller/dwc/pcie-spacemit-k1.c | 3 ---
 include/linux/pci_ids.h                       | 4 ++++
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-spacemit-k1.c b/drivers/pci/controller/dwc/pcie-spacemit-k1.c
index be20a520255b6..f89c6d46c7684 100644
--- a/drivers/pci/controller/dwc/pcie-spacemit-k1.c
+++ b/drivers/pci/controller/dwc/pcie-spacemit-k1.c
@@ -21,9 +21,6 @@
 
 #include "pcie-designware.h"
 
-#define PCI_VENDOR_ID_SPACEMIT		0x201f
-#define PCI_DEVICE_ID_SPACEMIT_K1	0x0001
-
 /* Offsets and field definitions for link management registers */
 #define K1_PHY_AHB_IRQ_EN			0x0000
 #define PCIE_INTERRUPT_EN		BIT(0)
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 1c9d40e09107d..d6f26cacc8e35 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2640,6 +2640,10 @@
 #define PCI_VENDOR_ID_SUNIX		0x1fd4
 #define PCI_DEVICE_ID_SUNIX_1999	0x1999
 
+#define PCI_VENDOR_ID_SPACEMIT		0x201f
+#define PCI_DEVICE_ID_SPACEMIT_K1	0x0001
+#define PCI_DEVICE_ID_SPACEMIT_K3	0x0002
+
 #define PCI_VENDOR_ID_HINT             0x3388
 #define PCI_DEVICE_ID_HINT_VXPROII_IDE 0x8013
 

-- 
2.43.0