[PATCH v2 5/8] riscv: dts: eswin: add hsp bus node

[Pinkesh Vaghela]

Add an HSP bus node to manage the HSP CFG clock used by HSP
peripherals. This clock is required for accessing both the HSP CSR
registers and the register spaces of HSP peripheral devices.

Signed-off-by: Pinkesh Vaghela <pinkesh.vaghela at einfochips.com>
---
 arch/riscv/boot/dts/eswin/eic7700.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/riscv/boot/dts/eswin/eic7700.dtsi b/arch/riscv/boot/dts/eswin/eic7700.dtsi
index a0fb82f4adca..08067d0c634b 100644
--- a/arch/riscv/boot/dts/eswin/eic7700.dtsi
+++ b/arch/riscv/boot/dts/eswin/eic7700.dtsi
@@ -252,6 +252,19 @@ plic: interrupt-controller at c000000 {
 			#interrupt-cells = <1>;
 		};
 
+		hsp: bus at 50400000 {
+			compatible = "simple-pm-bus";
+			ranges = <0x0 0x50400000 0x0 0x50400000 0x0 0xa0000>;
+			clocks = <&clk EIC7700_CLK_GATE_HSP_CFG_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			hsp_sp_csr: hsp-sp-top-csr at 50440000 {
+				compatible = "eswin,eic7700-syscfg", "syscon";
+				reg = <0x0 0x50440000 0x0 0x2000>;
+			};
+		};
+
 		uart0: serial at 50900000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x50900000 0x0 0x10000>;
-- 
2.34.1