[PATCH net-next v3 1/3] dt-bindings: net: Add support for Spacemit K3 dwmac

[Rob Herring (Arm)]

On Wed, 28 Jan 2026 15:29:27 +0800, Inochi Amaoto wrote:
> The GMAC IP on Spacemit K3 is almost a standard Synopsys DesignWare
> MAC (version 5.40a) with some extra clock.
> 
> Add necessary compatible string for this device.
> 
> Signed-off-by: Inochi Amaoto <inochiama at gmail.com>
> ---
>  .../devicetree/bindings/net/snps,dwmac.yaml   |   2 +
>  .../bindings/net/spacemit,k3-dwmac.yaml       | 103 ++++++++++++++++++
>  2 files changed, 105 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/spacemit,k3-dwmac.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/spacemit,k3-dwmac.example.dtb: ethernet at cac80000 (spacemit,k3-dwmac): compatible: ['spacemit,k3-dwmac', 'snps,dwmac-5.40a'] does not contain items matching the given schema
	from schema $id: http://devicetree.org/schemas/net/snps,dwmac.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/spacemit,k3-dwmac.example.dtb: ethernet at cac80000 (spacemit,k3-dwmac): compatible: ['spacemit,k3-dwmac', 'snps,dwmac-5.40a'] does not contain items matching the given schema
	from schema $id: http://devicetree.org/schemas/net/spacemit,k3-dwmac.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/spacemit,k3-dwmac.example.dtb: ethernet at cac80000 (spacemit,k3-dwmac): Unevaluated properties are not allowed ('phy-handle', 'phy-mode' were unexpected)
	from schema $id: http://devicetree.org/schemas/net/spacemit,k3-dwmac.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.kernel.org/project/devicetree/patch/20260128072931.875041-2-inochiama@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.