[PATCH 0/4] regulator: spacemit-p1: Fix voltage ranges and support board power tree

[Guodong Xu]

On Thu, Jan 22, 2026 at 8:12 PM Yixun Lan <dlan at gentoo.org> wrote:
>
> Hi Mark,
>
> On 11:27 Thu 22 Jan     , Mark Brown wrote:
> > On Thu, Jan 22, 2026 at 06:11:22PM +0800, Yixun Lan wrote:
> > > On 17:43 Thu 22 Jan     , Guodong Xu wrote:
> >
> > > > Patch 1, n_voltages is corrected to match hardware register widths, as the
> > > > previous values prevented regulators from reaching higher operational
> > > > voltages (e.g., 3.3V on LDOs).
> >
> > > This patch bring system-wide change that not only affect Bananapi F3..
> >
> > > Please also provide fix for other boards, I think you may not be able
> > > to test all boards, but make sure the patches are available, so people
> > > who interested can test, P.S I can help on milkv jupiter board
> >
> > Patch 1 looks like it should be OK as is?
> then with patch 3, and for other boards (milkv jupiter), should have similar
> DT fix as patch 4..

There is no "spacemit,p1" node in other k1 boards (milkv jupiter).

Best regards,
Guodong Xu

>
> --
> Yixun Lan (dlan)