[PATCH v5 0/5] Add clock support for SpacemiT K3 SoC

[Yixun Lan]

On 10:11 Thu 08 Jan     , Yixun Lan wrote:
> I've dropped the RFC tag as now the driver got tested on K3 SoC.
>
> The SpacemiT K3 SoC's CCU (clock control unit) is similar to old K1 generation,
> the clock and reset functionalities are distributed across several IP blocks,
> therefore, we model them as several clock tree accordingly.
>
> The PLL clocks has changed register setting layout, so introduce a PLLA type.
> Some gate clocks has inverted enable/disable logic which writing 1 to disable,
> while writing 0 to enable.
>
> [...]


Applied, thanks!

[1/5] dt-bindings: soc: spacemit: k3: add clock support
      https://github.com/spacemit-com/linux/commit/efe897b557e211a09f51d749eae5eca933e8bf56
[2/5] clk: spacemit: ccu_mix: add inverted enable gate clock
      https://github.com/spacemit-com/linux/commit/ace73b7e27633ec770cfb24cd4ff42c24815a9aa
[3/5] clk: spacemit: ccu_pll: add plla type clock
      https://github.com/spacemit-com/linux/commit/3a086236c600739d6653c0405d86aff7d6f03c06
[4/5] clk: spacemit: k3: extract common header
      https://github.com/spacemit-com/linux/commit/091d19cc24018f2bd783e932fb2403cb7a2bdb3c
[5/5] clk: spacemit: k3: add the clock tree
      https://github.com/spacemit-com/linux/commit/e371a77255b837f5d64c9d2520f87e41ea5350b9

Best regards,
-- 
Yixun Lan <dlan at gentoo.org>