[PATCH v2] ACPI: pci_root: Clear the acpi dependencies after PCI root bridge initialization on RISC-V

huyuye huyuye812 at 163.com
Mon Jan 12 06:16:29 PST 2026


Hi Rafael,
Thank you for your thorough review and valuable comments on v1.
I've updated the patch as follows:
1. Removed the redundant #ifdef CONFIG_ACPI and if (!acpi_disabled) 
guard as you pointed out. The entire code block indeed already depends
on CONFIG_ACPI at a higher level, making the inner guard unnecessary.
2. Moved acpi_dev_clear_dependencies to RISC-V specific architecture 
code (driver/acpi/riscv/acpi_pci.c). This ensures that ACPI dependency
clearing is handled within the appropriate architectural context.

Best regards
Signed-off-by: huyuye <huyuye812 at 163.com> 
---
 drivers/acpi/pci_root.c       |  6 ++++++
 drivers/acpi/riscv/Makefile   |  2 +-
 drivers/acpi/riscv/acpi_pci.c | 11 +++++++++++
 include/acpi/acpi_bus.h       |  1 +
 4 files changed, 19 insertions(+), 1 deletion(-)
 create mode 100644 drivers/acpi/riscv/acpi_pci.c

diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 9d7f85dadc48..a16eb9097cdc 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -30,6 +30,11 @@ static int acpi_pci_root_add(struct acpi_device *device,
 			     const struct acpi_device_id *not_used);
 static void acpi_pci_root_remove(struct acpi_device *device);
 
+
+void __weak arch_acpi_pci_root_add_clear_dep(struct acpi_device *device)
+{
+}
+
 static int acpi_pci_root_scan_dependent(struct acpi_device *adev)
 {
 	acpiphp_check_host_bridge(adev);
@@ -760,6 +765,7 @@ static int acpi_pci_root_add(struct acpi_device *device,
 	pci_lock_rescan_remove();
 	pci_bus_add_devices(root->bus);
 	pci_unlock_rescan_remove();
+	arch_acpi_pci_root_add_clear_dep(device);
 	return 1;
 
 remove_dmar:
diff --git a/drivers/acpi/riscv/Makefile b/drivers/acpi/riscv/Makefile
index 1284a076fa88..5b1bd0298fb9 100644
--- a/drivers/acpi/riscv/Makefile
+++ b/drivers/acpi/riscv/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-y					+= rhct.o init.o irq.o
+obj-y					+= rhct.o init.o irq.o acpi_pci.o
 obj-$(CONFIG_ACPI_PROCESSOR_IDLE)	+= cpuidle.o
 obj-$(CONFIG_ACPI_CPPC_LIB)		+= cppc.o
 obj-$(CONFIG_ACPI_RIMT)			+= rimt.o
diff --git a/drivers/acpi/riscv/acpi_pci.c b/drivers/acpi/riscv/acpi_pci.c
new file mode 100644
index 000000000000..368ff113e5c6
--- /dev/null
+++ b/drivers/acpi/riscv/acpi_pci.c
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2026, ZTE Corporation
+ *  Author: Yu Ye Hu <hu.yuye at zte.com.cn>
+ */
+#include <linux/acpi.h>
+
+void arch_acpi_pci_root_add_clear_dep(struct acpi_device *device)
+{
+	acpi_dev_clear_dependencies(device);
+}
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index aad1a95e6863..c00b523a6ebd 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -996,6 +996,7 @@ int acpi_wait_for_acpi_ipmi(void);
 
 int acpi_scan_add_dep(acpi_handle handle, struct acpi_handle_list *dep_devices);
 u32 arch_acpi_add_auto_dep(acpi_handle handle);
+void arch_acpi_pci_root_add_clear_dep(struct acpi_device *device);
 #else	/* CONFIG_ACPI */
 
 static inline int register_acpi_bus_type(void *bus) { return 0; }
-- 
2.43.0




More information about the linux-riscv mailing list