[PATCH v4 11/11] riscv: dts: spacemit: add SpacemiT K3 Pico-ITX board device tree

[Yixun Lan]

Hi Guodong,

I have a minor comment for the subject, it's kind of little bit redundant..
so, how about (also apply to patch 10):

[PATCH v4 10/11] riscv: dts: spacemit: add initial support for K3 SoC
[PATCH v4 11/11] riscv: dts: spacemit: add K3 Pico-ITX board support

On 13:18 Sat 10 Jan     , Guodong Xu wrote:
> K3 Pico-ITX is a 2.5-inch single-board computer equipted with a SpacemiT
> K3 SoC.
> 
> This minimal device tree enables booting into a serial console with UART
> output.
> 
> Signed-off-by: Guodong Xu <guodong at riscstar.com>
> ---
> v4: No change.
> v3: No change.
> v2: Add aliases node in this board DT.
>     Update the memory node to reflect the hardware truth. Address
>      starts at 0x100000000 (4G) boundary.
> ---
>  arch/riscv/boot/dts/spacemit/Makefile        |  1 +
>  arch/riscv/boot/dts/spacemit/k3-pico-itx.dts | 38 ++++++++++++++++++++++++++++
>  2 files changed, 39 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/spacemit/Makefile b/arch/riscv/boot/dts/spacemit/Makefile
> index 95889e7269d1..7e2b87702571 100644
> --- a/arch/riscv/boot/dts/spacemit/Makefile
> +++ b/arch/riscv/boot/dts/spacemit/Makefile
> @@ -4,3 +4,4 @@ dtb-$(CONFIG_ARCH_SPACEMIT) += k1-milkv-jupiter.dtb
>  dtb-$(CONFIG_ARCH_SPACEMIT) += k1-musepi-pro.dtb
>  dtb-$(CONFIG_ARCH_SPACEMIT) += k1-orangepi-r2s.dtb
>  dtb-$(CONFIG_ARCH_SPACEMIT) += k1-orangepi-rv2.dtb
> +dtb-$(CONFIG_ARCH_SPACEMIT) += k3-pico-itx.dtb
> diff --git a/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts b/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
> new file mode 100644
> index 000000000000..037ce757e5bc
> --- /dev/null
> +++ b/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
> @@ -0,0 +1,38 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (c) 2025 SpacemiT (Hangzhou) Technology Co. Ltd
> + * Copyright (c) 2025 Guodong Xu <guodong at riscstar.com>
strictly, should update to cover current year - which is 2026 now

> + */
> +
> +#include "k3.dtsi"
> +
> +/ {
> +	model = "SpacemiT K3 Pico-ITX";
> +	compatible = "spacemit,k3-pico-itx", "spacemit,k3";
> +
> +	aliases {
> +		serial0 = &uart0;
..
> +		serial2 = &uart2;
> +		serial3 = &uart3;
> +		serial4 = &uart4;
> +		serial5 = &uart5;
> +		serial6 = &uart6;
> +		serial7 = &uart7;
> +		serial8 = &uart8;
> +		serial9 = &uart9;
> +		serial10 = &uart10;
I think we only add aliases for devices which actually enabled

> +	};
> +
> +	chosen {
> +		stdout-path = "serial0";
> +	};
> +
> +	memory at 100000000 {
> +		device_type = "memory";
> +		reg = <0x1 0x00000000 0x4 0x00000000>;
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> 
> -- 
> 2.43.0
> 

-- 

Yixun Lan (dlan)