[PATCH v3 2/4] dt-bindings: pinctrl: spacemit: add K3 SoC support

[Guodong Xu]

Hi, Yixun

On Fri, Jan 2, 2026 at 3:04 PM Yixun Lan <dlan at gentoo.org> wrote:
>
> Add new compatible string for SpacemiT K3 SoC, the pinctrl IP shares
> almost same logic with previous K1 generation, but has different register
> offset and pin configuration, for example the drive strength and
> schmitter trigger settings has been changed.
>
> Signed-off-by: Yixun Lan <dlan at gentoo.org>
> ---
>  .../devicetree/bindings/pinctrl/spacemit,k1-pinctrl.yaml       | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/spacemit,k1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/spacemit,k1-pinctrl.yaml
> index 609d7db97822..9a76cffcbaee 100644
> --- a/Documentation/devicetree/bindings/pinctrl/spacemit,k1-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/spacemit,k1-pinctrl.yaml
> @@ -11,7 +11,9 @@ maintainers:
>
>  properties:
>    compatible:
> -    const: spacemit,k1-pinctrl
> +    enum:
> +      - spacemit,k1-pinctrl
> +      - spacemit,k3-pinctrl
>
>    reg:
>      items:
> @@ -81,6 +83,12 @@ patternProperties:
>                - enum: [ 7, 10, 13, 16, 19, 23, 26, 29 ]
>                  description: For K1 SoC, 3.3V voltage output
>
> +              - enum: [ 2, 4, 6, 7, 9, 11, 13, 14, 21, 23, 25, 26, 28, 30, 31, 33 ]
> +                description: For K3 SoC, 1.8V voltage output
> +
> +              - enum: [ 3, 5, 7, 9, 11, 13, 15, 17, 25, 27, 29, 31, 33, 35, 37, 38 ]
> +                description: For K3 SoC, 1.8V voltage output

Should one of these be 3.3V? Both descriptions currently specify 1.8V.

Best regards,
Guodong Xu

> +
>            input-schmitt:
>              description: |
>                typical threshold for schmitt trigger.
>
> --
> 2.52.0
>
>