[PATCH v3 10/11] riscv: dts: spacemit: add initial device tree of SpacemiT K3 SoC

[Samuel Holland]

On 2026-01-08 6:26 AM, Guodong Xu wrote:
> SpacemiT K3 is equipped with 8 X100 cores, which are RVA23 compliant.
> Add nodes of uarts, timer and interrupt-controllers.
> 
> Signed-off-by: Guodong Xu <guodong at riscstar.com>
> ---
> v3: Remove "supm" from the riscv,isa-extensions list.
> v2: Remove aliases from k3.dtsi, they should be in board DTS.
>     Updated riscv,isa-extensions with new extensions from the extensions.yaml
> ---
>  arch/riscv/boot/dts/spacemit/k3.dtsi | 548 +++++++++++++++++++++++++++++++++++
>  1 file changed, 548 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/spacemit/k3.dtsi b/arch/riscv/boot/dts/spacemit/k3.dtsi
> new file mode 100644
> index 0000000000000000000000000000000000000000..be9335fba32cb9e81915b2b91cf08c55a5e96809
> --- /dev/null
> +++ b/arch/riscv/boot/dts/spacemit/k3.dtsi
> [...]
> +
> +		simsic: interrupt-controller at e0400000 {
> +			compatible = "spacemit,k3-imsics","riscv,imsics";

style: missing space after comma

> +			reg = <0x0 0xe0400000 0x0 0x00200000>;
> +			interrupt-controller;
> +			#interrupt-cells = <0>;
> +			msi-controller;
> +			#msi-cells = <0>;
> +			interrupts-extended = <&cpu0_intc 9>, <&cpu1_intc 9>,
> +					      <&cpu2_intc 9>, <&cpu3_intc 9>,
> +					      <&cpu4_intc 9>, <&cpu5_intc 9>,
> +					      <&cpu6_intc 9>, <&cpu7_intc 9>;
> +			riscv,num-ids = <511>;
> +			riscv,num-guest-ids = <511>;
> +			riscv,hart-index-bits = <4>;
> +			riscv,guest-index-bits = <6>;
> +		};
> +
> +		saplic: interrupt-controller at e0804000 {
> +			compatible = "spacemit,k3-aplic", "riscv,aplic";
> +			reg = <0x0 0xe0804000 0x0 0x4000>;
> +			msi-parent = <&simsic>;
> +			#interrupt-cells = <2>;
> +			interrupt-controller;
> +			riscv,num-sources = <512>;
> +		};

Does the chip also have M-mode IMSIC and APLIC instances? Those need to be
represented in the devicetree as well, for M-mode firmware to access them, just
like the CLINT below.

Regards,
Samuel

> +
> +		clint: timer at e081c000 {
> +			compatible = "spacemit,k3-clint", "sifive,clint0";
> +			reg = <0x0 0xe081c000 0x0 0x0004000>;
> +			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
> +					      <&cpu1_intc 3>, <&cpu1_intc 7>,
> +					      <&cpu2_intc 3>, <&cpu2_intc 7>,
> +					      <&cpu3_intc 3>, <&cpu3_intc 7>,
> +					      <&cpu4_intc 3>, <&cpu4_intc 7>,
> +					      <&cpu5_intc 3>, <&cpu5_intc 7>,
> +					      <&cpu6_intc 3>, <&cpu6_intc 7>,
> +					      <&cpu7_intc 3>, <&cpu7_intc 7>;
> +		};
> +	};
> +};
>