[PATCH v2 3/3] riscv: dts: spacemit: modify pinctrl node in dtsi

[Yixun Lan]

Hi Troy,

  if there is one more iteration, I'd suggest to adjust the patch titile, 
to make it slightly more specific

  riscv: dts: spacemit: pinctrl: update register and IO power

On 14:42 Thu 08 Jan     , Troy Mitchell wrote:
> Change the size of the reg register to 0x1000 to match the hardware.
> This register range covers the IO power domain's register addresses.
> 
> The IO power domain registers are protected. In order to access the
> protected IO power domain registers, a valid unlock sequence must be
> performed by writing the required keys to the AIB Secure Access Register
> (ASAR).
> 
> The ASAR register resides within the APBC register address space.
> A corresponding syscon property `spacemit,apbc` is added to allow
> the pinctrl driver to access this register.
> 
> Signed-off-by: Troy Mitchell <troy.mitchell at linux.spacemit.com>
> ---
>  arch/riscv/boot/dts/spacemit/k1.dtsi | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
> index 7818ca4979b6a7755722919a5958512aa11950ab..f05429723d1bbbd718941549782461c49196ecef 100644
> --- a/arch/riscv/boot/dts/spacemit/k1.dtsi
> +++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
> @@ -565,10 +565,11 @@ i2c8: i2c at d401d800 {
>  
>  		pinctrl: pinctrl at d401e000 {
>  			compatible = "spacemit,k1-pinctrl";
> -			reg = <0x0 0xd401e000 0x0 0x400>;
> +			reg = <0x0 0xd401e000 0x0 0x1000>;
>  			clocks = <&syscon_apbc CLK_AIB>,
>  				 <&syscon_apbc CLK_AIB_BUS>;
>  			clock-names = "func", "bus";
> +			spacemit,apbc = <&syscon_apbc>;
>  		};
>  
>  		pwm8: pwm at d4020000 {
> 
> -- 
> 2.52.0
> 

-- 
Yixun Lan (dlan)