[PATCH v2 0/3] riscv: dts: spacemit: Add USB 3.0 support for K1

[Ze Huang]

This patch series enables the DWC3 USB 3.0 host controller on the
Spacemit K1 SoC and enables it for the Banana Pi F3 board.

For testing, the following kernel configurations should be enabled:

CONFIG_PHY_SPACEMIT_K1_USB2=y
CONFIG_PHY_SPACEMIT_K1_PCIE=y
CONFIG_USB_DWC3=y
CONFIG_USB_ONBOARD_DEV=y

This series is based on the spacemit k1/for-next branch.

Link: https://github.com/spacemit-com/linux

Signed-off-by: Ze Huang <huang.ze at linux.dev>
---
Changes in v2:
- rebased on spacemit k1/for-next
- Link to v1: https://lore.kernel.org/all/20251101-k1-usb3dts-v1-0-dd2660e5740b@linux.dev/

---
Ze Huang (3):
      riscv: dts: spacemit: Add USB2 PHY node for K1
      riscv: dts: spacemit: Add DWC3 USB 3.0 controller node for K1
      riscv: dts: spacemit: Enable USB3.0 on BananaPi-F3

 arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 48 +++++++++++++++++++++++++
 arch/riscv/boot/dts/spacemit/k1.dtsi            | 32 +++++++++++++++++
 2 files changed, 80 insertions(+)
---
base-commit: 4f67c877a9069c60dfb1767038fba5180bc12d68
change-id: 20260107-k1-usb3dts-v2-220c0fa7702a

Best regards,
-- 
Ze Huang <huang.ze at linux.dev>