[PATCH v4 2/9] dt-bindings: display: add verisilicon,dc

[Icenowy Zheng]

在 2026-01-05星期一的 09:46 -0600，Rob Herring写道：
> On Thu, Dec 25, 2025 at 12:11:58AM +0800, Icenowy Zheng wrote:
> > From: Icenowy Zheng <uwu at icenowy.me>
> > 
> > Verisilicon has a series of display controllers prefixed with DC
> > and
> > with self-identification facility like their GC series GPUs.
> > 
> > Add a device tree binding for it.
> > 
> > Depends on the specific DC model, it can have either one or two
> > display
> > outputs, and each display output could be set to DPI signal or "DP"
> > signal (which seems to be some plain parallel bus to HDMI
> > controllers).
> > 
> > Signed-off-by: Icenowy Zheng <uwu at icenowy.me>
> > Signed-off-by: Icenowy Zheng <zhengxingda at iscas.ac.cn>
> > ---
> > Changes in v4:
> > - Added a comment for "verisilicon,dc" that says the ID/revision is
> >   discoverable via registers.
> > - Removed clock minItems constraint w/o specific compatible
> > strings.
> > 
> > Changes in v3:
> > - Added SoC-specific compatible string, and arm the binding with
> > clock /
> >   port checking for the specific SoC (with a 2-output DC).
> > 
> > Changes in v2:
> > - Fixed misspelt "versilicon" in title.
> > - Moved minItems in clock properties to be earlier than items.
> > - Re-aligned multi-line clocks and resets in example.
> > 
> >  .../bindings/display/verisilicon,dc.yaml      | 144
> > ++++++++++++++++++
> >  1 file changed, 144 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/display/verisilicon,dc.yaml
> > 
> > diff --git
> > a/Documentation/devicetree/bindings/display/verisilicon,dc.yaml
> > b/Documentation/devicetree/bindings/display/verisilicon,dc.yaml
> > new file mode 100644
> > index 0000000000000..fe64cc1466690
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/verisilicon,dc.yaml
> > @@ -0,0 +1,144 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/verisilicon,dc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Verisilicon DC-series display controllers
> > +
> > +maintainers:
> > +  - Icenowy Zheng <uwu at icenowy.me>
> > +
> > +properties:
> > +  $nodename:
> > +    pattern: "^display@[0-9a-f]+$"
> > +
> > +  compatible:
> > +    items:
> > +      - enum:
> > +          - thead,th1520-dc8200
> > +      - const: verisilicon,dc # DC IPs have discoverable
> > ID/revision registers
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: DC Core clock
> > +      - description: DMA AXI bus clock
> > +      - description: Configuration AHB bus clock
> > +      - description: Pixel clock of output 0
> > +      - description: Pixel clock of output 1
> > +
> > +  clock-names:
> > +    items:
> > +      - const: core
> > +      - const: axi
> > +      - const: ahb
> > +      - const: pix0
> > +      - const: pix1
> > +
> > +  resets:
> > +    items:
> > +      - description: DC Core reset
> > +      - description: DMA AXI bus reset
> > +      - description: Configuration AHB bus reset
> > +
> > +  reset-names:
> > +    items:
> > +      - const: core
> > +      - const: axi
> > +      - const: ahb
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +
> > +    properties:
> > +      port at 0:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description: The first output channel , endpoint 0 should
> > be
> 
> No space before comma. Or perhaps should be a period instead.

Well I don't know why I inserted such a space, will remove it.

> 
> 
> > +          used for DPI format output and endpoint 1 should be used
> > +          for DP format output.
> > +
> > +      port at 1:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description: The second output channel if the DC variant
> > +          supports. Follow the same endpoint addressing rule with
> > +          the first port.
> > +
> > +    required:
> > +      - port at 0
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +  - clock-names
> > +  - ports
> > +
> > +allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: thead,th1520-dc8200
> > +    then:
> > +      properties:
> > +        clocks:
> > +          minItems: 5
> 
> That's already implicitly the min. Perhaps you wanted 'minItems: 4'
> on 
> the clocks and clock-names definitions for versions with only 1
> output?

Previously I specified minItems: 4 in the general part, however this
does not play well when some of core/axi/ahb clocks are not present.

> 
> > +        ports:
> > +          required:
> > +            - port at 0
> > +            - port at 1
> 
> It is valid to omit these if the output is present, but unused.

Well this sounds reasonable, although my driver does not play well if
only a port at 1 is defined w/o port at 0 .

Considering the previous two snippets, should I just remove this if
part?

> 
> > +
> > +additionalProperties: false
> > +
====== 8< ========